...move as you tighten up below. It is never easy to get a wrench and your hands in the proper position to tighten up the nut, but don't give up try a smaller Channel lock wrench if necessary. Sink ...
...normal If you are talking about the lift rod that opens and closes the sink drain stopper, then this is adjustable by moving a clamp on the rod. If the drain does open far enough then move the
...stopper will still not go down and be flush with sink. Used different settings on cam. Turned it all the counterclockwise and it will not move at all. Clockwise, it will go down some but not all the ...
I installed a new sink and pop up drain assembly. But the drain drains very slow because the stopper does not go high enough. I have tried adjusting the pop up assembly. make sure that the piece going
...on it but that does not help. The sink is about a year old and before this we had problems with the stopper not letting the sink hold water. Been an issue since new. The rod that you have been moving ...
5 questions posted
Usually answered in minutes!