Question about Stanley Air Tools & Compressors
...worn rather than push the nail gun and shoot one anail , try to hold the triger down and hit the areawith the tip of the gun , where you want the nail That will only put one nail in to the ...
...two nails instead of one how do you fix a senco finishpro 35 nail gun when it shoots two nails every time instead of one? i would double check the plunger to make sure its resetting after each
Question about Craftsman Air Tools & Compressors
every other nail. will shoot one nail then jam. must take nose plate off and remove nail. My Reliant brad gun won't take an 1 1/4" brad. It only goes up to 1 3/16". I have to find more of those myself
Question about Porter Cable Air Tools & Compressors
...shoot the next nail i have the DA250B PORTER CABLE finish nailer ,driver blade sheered off. put replacement kit in and now it will not retract to shoot the next nail , what should i do . there is ...
Question about Porter Air Tools & Compressors
nail) and other times it shoots two nails at once. Also when it shoots two at once, it usually doesnt need a trigger pull, just need to compress the nose. Worn trigger and or worn firing valve. Remove
...shoot any nails. There are no leaks when the gun is just sitting but when I pull the trigger I can hear and feel the air leaking around it. I got it to shoot 5 nails today and now it does not work. I ...
nail gun not fire? Safety works ok. Gun loaded with 2 1/2 finish nails. Trigger safety switch is off. Slight hiss of air when trigger depressed but does not fire. It sounds like you have a bad seal or
Question about Senco Air Tools & Compressors
Senco Finishpro18 just stopped shooting nails. Took it apart put it together. Shoots a couple of nails then stops. Press the nailer against the target pull the trigger and air comes out of the handle.
Question about Stanley Air Tools & Compressors
...gun. Also check that the two inch nail is the same angle as the three in. Place the nails on the outside of the rails with the heads aligned with the rail. The first nail ...
Question about Porter Cable Air Tools & Compressors
...shoot all the way. thing on the gun but still doesnt work you can try to use connections with bigger holes and a hose of bigger diameter, so you have more air at the gun en less pressuredrop over the ...
58 questions posted
Usually answered in minutes!
68 Questions
39 Questions