Whirlpool WTW58ESVW Top Load Washer "moves spin" Questions

will not spin I have a kenmore Heavy Duty/extra large capacity plus - will not spin when it goes to the spin cycle. will wash and rinse You have either a bad lid switch, a bad drive coupling or a bad ...

Maytag washer tub will not spin. I have a maytag mav3855aww washing machine. Last night the washer made a clunking noise and smelled of smoke. I noticed that the agitator was not moving at all. I ...

spin on first go round (timer/switch moves through cycles). Once the switch is moved back to the end of the wash cycle, it drains and refils but it doesn't rinse or spin. After several refils, we move

...It will start spinning. When washer stops the tub moves about 1.5 inches and then spins, cannot hold tub with hand to stop spinning. Next spin same thing. What is the model number of your

noise,,,basically won't spin a jerky and loud noise on spin cycle...tubs moves maybe 3 to 4a inches stops moves again stops moves again all with noisy What is the complete model number of the unit

Does not spin in most cycles Our washer PAV2000AWW stopped spining in the regular cycle right before rinsing. I had to move the cycle to the final spin and then it would spin. Of course I then had to ...

I have a kenmore washer model # 110.20722990 will agitate but will not move to the next cycle to drain or spin If you can manually move the timer to spin and it works replace the timer. If you move to

Whirlpool filling and washing, not draining, rinsing or spinning My Whirlpool CleanTouch will fill with water, will agitate, sounds as if it wants to start draining and stops, the dial keeps moving as

...moves during spin cycle Washer moves across floor during spin cycle If this is a newly installed washing machine have you taken out the four big bolts on the back of the machine? It holds the drum to ...

...spin at the end of it's cycle and the dial moves as it should, like it completed everything. Now If I manually set the dial to the spin cycle, it spins just fine. Desperate!!! The lid switch was just ...