Question about Nikon Optics
...-0.14 i do not know what that means The only way to sight in is to bore sight or use a bore sight laser then put rounds down range at the target to get the point of aim and point of impact to ...
...Bore Sight with multiple adapters for various calibers, I have been looking for a bore sight for the 17 HMR, is there one available for the set without buying the entire set? You can buy a laser bore ...
...Bore Sight - 223 Model SM39001 (for AR-15) Once the scope is mounted properly, and assuming you have not made any vertical or horizontal adjustments, set the rifle on a stable platform, insert the ...
Question about Centerpoint Technologies Optics
bore sight a rifle with a center point 4x16x40 and i run out of adjustment to get the lazer to align with the cross hairs When bore sighting you need to adjust in small steps and "TAP" the bore or the
...bore sight it,,,,,first clamp the rifle in a stand and look down the barrel at some thing like a post top at say 100 yds when you see the post top in the bore dont move the rifle any more till you ...
My cross hairs do not move when i adjust my sights. i bought a laser bore sighter and the laser points in the same exact spot no matter how far i turn my adjustments nor do my cross hairs move. This ...
...sight down rifle bore (some rifle designs you can't do this) to align bore with a object used as a "target", and compare where the scope is aiming. You MIGHT need to loosen and shift the scope mount ...
Bore sight kits are a bit pricy, might be best to take it to a gun range an start at 15 yards shoot a few move out to 25 the 50 then 100. Yes your scope should be sighted for one gun one round, with a
and bore sight the scope at 100yds first, but clamp the gun in a gun vice when sighting it in,,,,you need to get rid of all the wobbely bits first? gess whats the bigest wobbley bit,,,,yep,,,,,you are
4 questions posted
Usually answered in minutes!