Bushnell Banner 6-18x50 Ao Rifle Scope Matte "scope crosshair turn" Questions

...turn elev. or windage and the crosshairs in the scope do not move. With modern rifle scopes the crosshairs do not move.They are designed so that the crosshairs are always centered.I have not seen a ...

crosshair are turning to right Are the turrets also turning to the right? If not, the crosshair ring has broken loose inside your scope, if so, you need to correct issues with your mounting system.

3-9x50 BSA Deerhunter Rifle Scope. The crosshairs are not level. When mounted the crosshairs sit crooked What that means is they are not mounted correctly. The scope mounts should be square with your ...

...turn scope until crosshairs are into position. Then tighten screws. You will need to sight in again. If it keeps moving replace scope rings. 1. You first make a 'plumb line' to compare your cross ...

...scope will turn, either 2 or 4 screws that hold the two halves of the ring together. There are numerous tools to help you align the crosshairs, but when I do this job I just square-up the reticle ...

...scope is out of adjustment can't find manual and need to reset to zero Turn the ajdustment knob, all the way in one direction. Then, counting the number of clicks as you do it, turn it all the way in ...

...turn the scope's adjustment in the DOWN direction. If you want to move the direction the scope is looking left or right, turn the windage adjustment on the RIGHT side of the scope left or right to ...

...turn the scope so that it is upright. The best way to make sure is to use a scope level. Lay the scope level on top of the scope turrent to confirm that the top of the scope is level. Sighting thru ...

...was off. when we turned it back to zero the light came back on. When u tap the scope the light will turn off and on the switch is broken,,if you dont really need the light on just leave the battery ...

...turn windage screw clockwise. If you raise the horizontal cross hair you will lower the point of impact of the bullet. If you move the vertical cross hair to the right the shot placement will go to ...