Make sure the microwave is unplugged.
You should have some kind of panel on the top front of the microwave. There are typically 4-6 wood screw along the top edge. If you can have an assistant, remove all but 2 then have the assistant support the unit while removing the last 2.
Once the unit is free on the front, you should lift up on the rear to detach from the rear support plate.
Typically, the biggest challenge is getting the cover plate off without damaging the unit or the cabinetry that it is under.
SOURCE: G Fi problem on a Coachman Aurora motor home.
Do you mean GFI ? as in electrical plug ? If so, on the plug there is a "line" side for the white and line side for the black.... there is also a "load" side for white and a load side for black. You will have to determine which wires are load and which are line. The "line" side is your "hot wire" and the load side is for down stream plugs or appliances. Dis connect all wires from the plug. "Then" turn the electrical system is on and use a meter to see what wire are hot and which ones are not. The Hot wire black and matching white will go onto the "line" side of the plug. the other black and white will go onto the "load" side of the plug. That should do it :)
190 views
Usually answered in minutes!
×