Question about RVs

1 Answer

Lockout on powergear slideout slide wont open

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 57 Answers

Do you have the wrench that u can manually crank it out? if not try to bypass the switch with a 12 volt power source directly to the motor. take a a 12 volt battery and two leads and tap in to the motor. if that does not work. the motor could be bad.

Posted on Dec 22, 2016

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My slideout doesn't move, battery is new, changed inline fuse at battery, all other electrical seems to work


there is a momentary three way two pole rocker switch used to activate the linier motors that move the slide out. the most commin problem is they use a switch that dosen't have a high enough amp rating and the contacts burn out quickly. it is very importent to release the switch immediatly after the slide stops motion going in or out or these switches burn out very fast.

Jan 07, 2015 | Keystone 2009 Cougar Xlite 26BHS

1 Answer

Repair slide <living room is extended and won`t return>


Check to ensure nothing is blocking the slideout, its path or the gears of the motor. If you don't see a dimming of the lights when you push the retraction button or don't hear any motor noise check the fuse for the slideout motor. If all else fails there should be a manual slide retraction option somewhere that allows you to retract the slideout using a crank or a power drill. Check the owner's manual.

Sep 28, 2014 | Coachmen 2009 Concord 300 TS

1 Answer

How to adjust 2010 montana high country slideout


Is this the system with the cables on the side? If so, they should, via a system of pulleys, be routed to the top of the slide on the inside of the coach. There you will see a few adjustment points. Before you do that, have you lubed the slide seals? If not, use 100% silicone spray and lube the seals good. The seals can get tacky and grab the slide making it jump when in motion. You will also want to mark the adjustment bolt before making any adjustments just incase you need to go back to the original setting.

Jul 21, 2014 | Keystone 2011 Montana High Country 323RL

2 Answers

Rv slideout adjustment


Every slide out has a manual override for the motors. You should be able to call the dealer you purchased it from and they will tell you where it is. You can then adjust it back to a closed position and use it normally.

Jul 16, 2014 | Gulf Stream 2013 Conquest Lite 259BH

1 Answer

Slideouts will not move


Hydraulic or electric slide system? If electric, could be a low voltage problem or failed inline circuit breaker. Also, do not try to move more than one slide at a time because it will blow the fuse. If hydraulic, make sure the bypass valves have not been opened. Do not add fluid while the slide are out. If you do, when the slide come back in they will force the excess fluid out of the reservoir and make a huge mess in the storage compartment.

May 03, 2014 | Forest River 2014 Cedar Creek Silverback...

1 Answer

The slideout is not working. No noise everything else is working cannot locate fuse for slideout?


There will be an inline circuit breaker that controls the power for the slide. Some are automatic reset and others have a small black button on the side that will need to be pushed in to reset. These are usually located in an outside storage compartment.

Mar 23, 2014 | Keystone Bullet 260FB RVs

1 Answer

Main Slideout not working


Not sure what kind of trailer you have, but the fuses should be behind a metal cover - for mine, its located under the refrigerator. When you open it, you will see all of the fuses. Hopefully, they are labeled, but don't bet on it. Use a meter to check the fuses - put the meter tip on each side of the fuse, with the meter on volts. If you read 12 - 14 volts, the fuse is blown. A good fuse will not show any voltage.

If you can't find the fuse box, when you have the camper plugged into AC, turn on all the lights - the fan that cools the inverter should come on - follow that sound and you will find the fuses. Good Luck

Jan 06, 2014 | Holiday Rambler RVs

1 Answer

Slideout will not slide out.


check fuse for power then wiring for power to motor then check motor for operation then gear or pully system and slides for a seized condition

Jan 05, 2014 | Holiday Rambler RVs

1 Answer

Have 2 slideouts in my 5th wheel. The bedroom slide opens up, but the large living rm slide will not open


check then circuit for power to the motor then check for a seized condition also check the switch for operation

Jan 05, 2014 | Holiday Rambler RVs

Not finding what you are looking for?
RVs Logo

Related Topics:

26 people viewed this question

Ask a Question

Usually answered in minutes!

Top RVs Experts

keylempi

Level 1 Expert

38 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Jim Goldsmith
Jim Goldsmith

Level 3 Expert

1889 Answers

Are you a RVs Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...