Question about Keystone 2010 Montana Mountaineer Edition 285RLD

2 Answers

How do I winterize my 2010 Montana Mountaineer. I have had it two years and I hate having to winterize. it takes at least two people but three is better.

I hook up the hose to the outlet that says winterizing and put the other end into the antifreeze and turn on the pump. nothing happens. it will not pull anything from the antifreeze>

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 379 Answers

You need to set the water valves in the "Winterize" position. Should be a sticker inside the access door (usually near the city water inlet) with instructions.

Posted on Dec 23, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 761 Answers

Maybe you need to prime your suction pump.

Posted on Nov 19, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the water pump on a Keystone Montana Mountaineer 345 dbq located


Look in the storage compartment area behind a partition or wall. Most I have seen are behind those covers and are near the connections for water or the hot water hear back side behind that wall or partition. For the Montana's, if you go in through the door on the driver's side, it will be on the right.

Mar 14, 2017 | RVs

1 Answer

What is the winterizing process for our 2011 Keystone Montana 343RL High Country 5th wheel?


just make sure all water is drained and sewer is drained. put a trickle charger on batteries if u don't have solar. make sure batteries are good on acid. if low ONLY PUT DISTILLED WATER IN THEM.

Dec 18, 2016 | RVs

1 Answer

Water under tub


CU DOPUL DE LA SCURGERE FIXAT ? E CADA FISURAT?.
GARNITURA DE LA GURA DE EVACUARE RUPT? .
LA NIVELUL MAXIM ,CURGE PESTE SUPRAPLIN.

May 27, 2016 | Keystone 2010 Montana Hickory Edition...

1 Answer

Where is water pump located on a 2008 montana 285rld 5th wheel.


You may get the info from the following:

Montana Mountaineer RV 285 RLD -- Keystone RV Dealer ...

? 2:07
www.youtube.com/watch?v=zATfbwsZX68
May 14, 2012 - Uploaded by Lakeshore RV Center
Lakeshore-RV.com - Lakeshore RV Center Dealer to the World! This Montana Mountaineer RV Fifth Wheel ...

Oct 01, 2015 | Keystone 2008 Montana Mountaineer Edition...

1 Answer

Where is water pump located on this unit


usually just inside where the fresh and city water hook up is inside a compartment or behind a removeable panel if you still cant find it turn on the water pump and follow the vibration

Oct 01, 2015 | Keystone 2008 Montana Mountaineer Edition...

1 Answer

How to adjust 2010 montana high country slideout


Is this the system with the cables on the side? If so, they should, via a system of pulleys, be routed to the top of the slide on the inside of the coach. There you will see a few adjustment points. Before you do that, have you lubed the slide seals? If not, use 100% silicone spray and lube the seals good. The seals can get tacky and grab the slide making it jump when in motion. You will also want to mark the adjustment bolt before making any adjustments just incase you need to go back to the original setting.

Jul 21, 2014 | Keystone 2011 Montana High Country 323RL

1 Answer

Where is the location of the water filter on a 2014 Montana Mountaineer Fifth Wheel


Typically located behind the docking station in the outside, drivers side compartment. You will have to remove an access panel to get to it.

Apr 30, 2014 | Keystone 2010 Montana Mountaineer Edition...

1 Answer

Cannot find the water pump to winterize 2010 Forest River Sierra. I can hear it running but am unable to locate it. The bypass valves are in the correct winterize position but the antifreeze will not go in...


You don't need to find the water pump. Make sure your water tank is empty before adding RV winterizer to the water tank. Run each faucet in the RV with bypass valve NOT in winterize position until you see the antifreeze begin to come out of the faucet. Do this for both cold and hot water side for each faucet. Then move bypass valve to winterize position and run for a few seconds.

Oct 29, 2013 | Forest River 2009 Sierra 355QBQ

Not finding what you are looking for?
Keystone 2010 Montana Mountaineer Edition 285RLD Logo

398 people viewed this question

Ask a Question

Usually answered in minutes!

Top Keystone RVs Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

keylempi

Level 1 Expert

38 Answers

4stevetaylor

Level 1 Expert

62 Answers

Are you a Keystone RVs Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...