Question about Jayco 2013 White Hawk Ultra Lite 28DSBH
Posted by Anonymous on
Connect the trailer to the city water supply, turn on the water and open each faucet until clean clear water is present. Don't forget the toilet and outside shower if equipped. Next reinstall the anode rod (suburban) or drain plug (atwood) into the water heater. Go to the back side of the water heater and close the valve on the pipe that connects the cold (bottom line into water heater) and hot (upper line out of the water heater) and then open the bottom cold water line valve and, if equipped, the upper hot water valve. This will fill the water heater. Open the hot water valve at the kitchen faucet. When the water flow is steady the water heater is full and ready for use. If the unit is equipped with a water filer, after all is flushed out, turn the water off and remove the filter housing. Install a new filter and re-secure the housing and turn the water back on. If you are using the fresh water pump, it is possible that the winterizing valve for the pump was left open. If so, close that valve which will divert the pump back to drawing from the tank.
Posted on Jul 24, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 07, 2016 | RVs
Oct 30, 2015 | Keystone 2013 Cougar High Country 321RES
Mar 10, 2015 | Jayco 2013 Greyhawk 31DS
Nov 11, 2014 | Keystone 2010 Montana Mountaineer Edition...
Nov 01, 2014 | RVs
Sep 10, 2014 | RVs
Apr 18, 2014 | Jayco Jay Flight 29 QBH RVs
Apr 18, 2014 | Fleetwood 2008 Terra LX 31M
Oct 29, 2013 | Forest River 2009 Sierra 355QBQ
553 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: