Question about Rose Electronics CRV-R4V/AUD - Crystalview Plus Cat5/6 Kvm

2 Answers

How do you get the wifi to turn on ive tried everything

The wifi refuse to cut on ive reset and turned off and back on idk what else to do

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 26 Answers

I do not see wifi on this unit. I have read the manual. Cat5/6 means hard wired cable. Check the manual that came with the unit if you have it if not download it at: http://www.rose.com/manuals/CrystalViewPlus.pdf

Posted on Feb 26, 2014

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

1) use more natural language and explain more clearly what the problem is, as reading what you wrote was a bit of an effort with all the text language and I am still not clear about that the problem is
"wifi refuses to cut on" what exactly does that mean?
It can help if you help people help you :-)
And are you sure that there is WIFI capability in this KVM ?

Posted on Jan 27, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel cutoff switch located on 1998 winnabago adventurer 5.7L


I don't understand the question, no fuel cut off switch on a gasoline tank, when the ignition is turned on, the fuel pump should pump fuel into engine. If no ignition sensed, the fuel doesn't flow.

Mar 20, 2017 | RVs

1 Answer

How to winterize


ok, been a while so lets ee if I can get this all down.

1 - Drain water from your holding tank and remove drain plug in hot water heater. Drain holding tanks ( Waste )
2- turn on bypass for hot water heater ( instruction if needed )
3 - Get yourself some winterizing fluid ( can't remember exact name ) from your local Dealer . 2 or 3 gallons should be good
4- Poor this fluid into your water rez tank. All of it
5 - now go around to EVERY tap in your trailer ( one at a time ) and turn on cold water until water runs pink ( or what ever colour fluid you bought ) Close faucet them do the same for hot water tap. Repeat this at every faucet. Even the ones outside if you have any.
6 Don't forget to flush toilet in water runs pink.
7. Ensure all gas vales have been turned off ( tank vales included )

If you did everything right you should be good to go.

Plz double this list to make sure I covered everything

Oct 02, 2016 | Keystone 2015 Alpine 3555RL

1 Answer

I bought a 1999 Jayco 5th Wheel model 3310RLS. I got the generator running and when I cut if off the system does not switch back to normal electrical power?


call in an electrician
it could have an automatic relay control that prevents both gen set and mains power operating at the same time ( phasing cycle out of sync destroys the genset ) or may require you to manually reset from get set to mains power
take it to a jayco service center and have it checked out

Aug 06, 2016 | RVs

2 Answers

Hot water heater went out. Can't relight


check that there is gas in the bottle , the tap is on
check that there is power to the relight system

Oct 25, 2015 | Dutchmen 2011 Coleman 387DQDS

1 Answer

What is the red light that has just come on, near the kitchen sink?


If you have a Suburban water heater, it may be the overtemp reset light. If you have hot water, don't worry about it.

Apr 01, 2015 | RVs

1 Answer

Surge Guard 50amp - no shore power


Do you have good power that the outlet. I have seen many issues at RV parks of not having sustained power or one leg of the breaker going bad causing loss of power. If you do have good power coming into the surge protector but not out. Then go through the reset procedures for the surge protector. If it will not reset, then the surge protector has failed and will need to be replaced. If power is coming through then check the main breakers in the coach for possible failure. Breakers can trip but still look as if they are properly set. Turn them completely off then back on to reset.

Apr 09, 2014 | Tiffin Motorhomes 2014 Allegro 32 CA

1 Answer

Turn my key to the on position and everything flashes on and off on the dash.


Saw this awhile ago on a Ford Mustang. There was a self-test built into the computer. Flashing lights was a warning. Turned out to be nothing more than corroded connections on the battery terminals. Clean ALL your connections on the engine and coach, including solenoids and relays.

Mar 16, 2014 | Holiday Rambler 2013 Ambassador 40PBT

1 Answer

No power on Cyclone 4100


Do you have power at the outlet where the unit is plugged in? If not restore power to that point. Next, check the main breaker to determine if it has tripped. It may look like it is on but to verify, turn it off and then back on. It should click into place. If that does not work and your trailer has a genset with a transfer switch. Check the transfer switch to make sure that it has not failed. It may be locked into the genset side and not switching back to shore power. If you are running the genset and do not have power make sure the breakers on the front of the genset are on.

Mar 02, 2014 | Heartland 2012 Cyclone 4100 KING

2 Answers

Lost power on 3 electrical outlets


is it possable that these 3 circuits are 110 volts and you are switching to 12 volts so it cuts them out ?

Dec 29, 2013 | Dutchmen RVs

Not finding what you are looking for?
Rose Electronics CRV-R4V/AUD - Crystalview Plus Cat5/6 Kvm Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Rose Electronics RVs Experts

Ken Strite
Ken Strite

Level 2 Expert

69 Answers

keylempi

Level 1 Expert

38 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Are you a Rose Electronics RVs Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...