Yamaha YZF-R6 - Recent Questions, Troubleshooting & Support


Hi, Mandy for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Yamaha YZFR6V Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
2013 Yamaha YZF R6 Owner Manual
2013 Yamaha YZF R6 Review
Yamaha YZF R6 Wikipedia

2013 Yamaha YZF... | Answered on Aug 31, 2018


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.r1-forum.com/forums/104-04-06-r1-mechanical-help/234409-torque-setting-warning-all-interested.html
YAMAHA YZF R6 99 Service Manual Engine Tightening Torques Yamaha 2001 YZF R6 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
2001 Yamaha YZF R6 Owner Manual

2001 Yamaha... | Answered on Aug 23, 2018


Hi, Mark for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
https://www.r6-forum.com/forums/57-garage-mechanical-help/88834-starting-circuit-cut-off-relay-bypass.html
R6 bad starter and relay pt1
Yamaha YZF R6 2006 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha 2006 YZF R6V Owner Manual

2005 Yamaha... | Answered on Aug 03, 2018


Hi, Matt and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at the ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Tilt sensor needs a reset.
11. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
R6 getting no spark when turning over Yamaha R6 Forum YZF R6 Forums
How to diagnose no spark situation on motorcycle
Yamaha YZFR6V Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
2017 Yamaha YZF R6 Owner Manual

2012 Yamaha YZF... | Answered on Aug 01, 2018


Hi, Nicholas for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
https://www.r6-forum.com/forums/51-how-tos/104033-how-overide-immobiliser.html
http://www.r1-forum.com/forums/104-04-06-r1-mechanical-help/260243-removing-immobilizer-system-help.html
YAMAHA YZF R6 99 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
YAMAHA YZF R6 Owner Manual

2006 Yamaha... | Answered on Jul 21, 2018


Hi, Nelson and the usual suspects are:
1. Improper clutch adjustment or not disengaging.
2. Bent shift shaft.
3. Shift fork bent or seized.
4. Gear seized on the shaft.
5. Gear positioning lever binding.
6. Shift return springs weak or broken.
7. Shift return spring pin loose
8. Shift mechanism arm spring is broken.
9. Shift mechanism arm is broken.
10. Shift drum is broken.
11. Shift lever loose on the shift shaft.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.motohouston.com/forums/archive/index.php/t-159677.html
http://www.r6-forum.com/forums/57-garage-mechanical-help/159469-cant-shift-into-gear.html
Yamaha 2001 YZF R6 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
2001 Yamaha YZF R6 Owner Manual

2001 Yamaha... | Answered on Jul 21, 2018


Hi, Phil parts swapping is common with most motorcycles when it comes to interchangeable or compatible parts from one model with another "EXCEPT" for the CDI's they are year-make-model "SPECIFIC" the best thing to do is call your local Dealership Parts Department or a reputable independent shop. If your location is not near a shop then go online and find a parts catalog or "FICHE" and match part numbers depending on your criteria.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/36414-99-r6-ignition-problem.html
Yamaha yzf r6 5eb ignition barrel wire replacement and keep original key
YAMAHA YZF R6 99 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
http://www.journey.cz/moto/navody/Yamaha%20R6%201999%20owners%20manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


1999 Yamaha... | Answered on Jun 26, 2018


It could actually be that the countershaft sprocket has stripped-out the splines that engage it to the countershaft. Take off the cover and have a look at the sprocket. Hopefully it is only the sprocket that is damaged and not the transmission shaft that it mounts to.
Another possibility is that the clutch cable has somehow gotten waaay out of adjustment. Just feel the clutch lever; you should have some free play at the lever. In other words, the first 1/4" or so of lever movement should do nothing except take up a small amount of slack in the cable.
Are you sure it is actually going into gear? Or have the splines on the shift shaft stripped-out? These are the things I would check first. If it isn't one of these, then I predict some major transmission work is in your future.

2003 Yamaha... | Answered on May 10, 2018


Hi, Ronald either the fuse is bad or the fuse holder is faulty, for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/182825-how-check-if-you-blew-fuse.html
YAMAHA YZF R6 99 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

1999 Yamaha... | Answered on Apr 19, 2018


Hi, Sandra
13S-8591A-H0-00
for this scenario, you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.r6messagenet.com/forums/pdf/LIT-11616-21-61.pdf
free service manual
https://www.partsfish.com/page/oem-parts-for-yamaha
2012 Yamaha YZF R6 Owner Manual
2012 Yamaha YZF R6 Review
Yamaha YZF R6 Wikipedia

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2012 Yamaha YZF... | Answered on Mar 02, 2018


Hi, Jamie and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Quick disconnect check ball stuck.
14. Compression below 75 PSI.
15. A stuck-bent-burnt valve.
16. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
17. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
18. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
19. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections are loose or connected to the wrong cylinders.
20. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
21. Faulty neutral, clutch, kickstand safety switch.
22. Faulty fuel pump or fuse or relay.
23. Faulty or corroded run/stop switch.
24. Tilt sensor needs a reset.
25. Security system not disarming alarm needs a reset.
26. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
03 R6 wont start
What Do Check When My Motorcycle Won Start Honda Shadow Forums Shadow...
Yamaha YZF R6 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2003 Yamaha... | Answered on Feb 25, 2018


Hi, Salaheddine before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.r6-forum.com/forums/57-garage-mechanical-help/162715-will-not-start-good-battery-no-clicking-but-no-turn-over.html
http://www.r6messagenet.com/forums/welcome-center/161248-please-help-bike-wont-start-turn-over.html
Yamaha YZF R6 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha YZFR6A Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Feb 14, 2018


Hi, Jose and the usual suspects are:
1. Fuel tank empty.
2. The fuel tank has old dead gas.
3. Fuel tank bottom contaminated with ethanol sludge, dirt, water, rust, etc.
4. Fuel supply valve/petcock turned off.
5. Fouled spark plugs.
6. Engine flooded as a result of overuse of the choke.
7. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
8. Fuel valve/petcock or filter clogged.
9. Fuel line to carburetor or throttle body pinched, kinked or blocked.
10. Carburetor float stuck.
11. Fuel injectors clogged.
12. Fuel injectors stuck open.
13. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a cursory reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
14. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
15. Loose or corroded wire connection at the coil or plug between ignition sensor and ECM module.
16. Spark plug cables in bad condition and shorting check for spark leakage in the dark, cable connections loose, or connected to the wrong cylinders.
17. Ignition timing incorrect due to a faulty ignition coil, ignition module or MAP, CMP, CKP, O2, TPS, ETP, IAC sensors.
18. Faulty neutral, clutch, kickstand safety switch.
19. Faulty fuel pump or fuse or relay.
20. A stuck bent or burnt valve.
21. Tilt sensor needs a reset.
22. Security system not disarming alarm needs a reset.
23. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.r6messagenet.com/forums/r6-maintenance-technical/26969-bike-turning-over-but-not-starting.html
03 R6 wont start
Yamaha YZF R6 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2004 Yamaha... | Answered on Oct 30, 2017


Hi, Anonymous for more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Please help lost key need to hard wire ignition
Starting R6 without key
Yamaha YZF R6 Service Manual
https://www.partsfish.com/page/oem-parts-for-honda
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


2004 Yamaha... | Answered on Oct 28, 2017


Hi, Anonymous the answer to this question is way above my pay grade for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha YZFR6V Service Manual
OEM parts for Yamaha
Yamaha YZFR6V Owner Manual
yamaha r6
Yamaha YZF R6 Wikipedia

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2006 Yamaha... | Answered on Oct 23, 2017


Hi, Shiro300zx for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day. 2000 yamaha r6 wire diagram Google Search
Yamaha Motorcycle Wiring Diagrams
Yamaha YZF R6 Service Manual
OEM parts for Yamaha
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2000 Yamaha... | Answered on Jun 05, 2017


Hi, Thequarterma the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2006 Yamaha YZF R6 wiring diagram Google Search
Yamaha Motorcycle Wiring Diagrams
Yamaha YZF R6 2006 Service Manual
OEM parts for Yamaha
Yamaha 2006 YZF R6V Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2006 Yamaha... | Answered on May 13, 2017


Hi, Anonymous for more information about your question and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bouncing idle
Jumping needle on RPM Gauge The Hull Truth Boating and Fishing Forum
Yamaha 2006 YZF R6V Owner Manual
OEM parts for Yamaha
Yamaha YZF R6 2006 Service Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2008 Yamaha... | Answered on May 01, 2017


Hi, Anonymous and the usual suspects are:
1. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
2. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Spark plugs in bad condition or partially fouled.
4. Spark plug cables in bad condition and leaking check for spark leakage in the dark
5. Spark plug gap too close or too wide.
6. Faulty ignition coil, module, and or sensor.
7. Loose, dirty, or corroded ignition module connector at crankcase.
8. Faulty CKP or CMP, MAP, ETS, ATS, TPS, O2 sensor.
9. Dirty air filter.
10. Intake air leak.
11. Water, dirt, or rust in the fuel system.
12. Carburetor damaged, contaminated, sticky float, plugged jets.
13. Multiple carburetors out of sync.
14. Fuel filter clogged.
15. Old or contaminated fuel.
16. Fuel tank vent system plugged or carb vent line closed off.
17. Gas cap diaphragm valve faulty.
18. Vacuum line from intake manifold to fuel valve is broken, cracked, pinched, or missing.
19. Carburetor controls misadjusted.
20. Incorrect valve timing.
21. Valve springs floating, weak, or broken.
22. Damaged intake or exhaust valve.
23. Incompatible performance parts.
24. Control module may be in "LIMP" mode
25. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
2002 R6 hard to start and sputters
http://www.r6messagenet.com/forums/r6-maintenance-technical/56256-bike-sputtering.html
Yamaha YZF R6 Service Manual
OEM parts for Yamaha
Yamaha YZF R6 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

2002 Yamaha... | Answered on Apr 29, 2017

Not finding what you are looking for?

10 questions posted

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

Tom

Level 2 Expert

314 Answers

vince

Level 3 Expert

1216 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1165 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Yamaha Motorcycles

  • Forum

View Most Popular

  • Yamaha Motorcycles
Loading...