Yamaha Motorcycles - Answered Questions & Fixed Issues


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.venturerider.org/forum/showthread.php?31759-Kickstand-removal
Removing and Replacing Kick Stand Springs
Yamaha XVZ13TFL Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha Royal Star XVZ13CTV Owner Manual

2007 Yamaha... | Answered 2 days ago | 22 views


Hi, Dennis for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+1999+Yamaha+XV+1600+Road+Star&tbm=isch&source=univ&sa=X&ved=2ahUKEwiM67Gv1vbiAhVipVkKHW8FDm8QsAR6BAgFEAE&biw=1440&bih=757
Yamaha Motorcycle Wiring Diagrams
http://www.werder.ee/Manual/XV1600.pdf
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha ROAD STAR XV16A Owner Manual

1999 Yamaha XV... | Answered on Jun 19, 2019 | 12 views


Hi, Phil for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+1996+Yamaha+XV+535+Virago+DX&tbm=isch&source=univ&sa=X&ved=2ahUKEwjw3ZmdyfbiAhVKqlkKHVyOAZwQsAR6BAgAEAE&cshid=1560982705497130&biw=1440&bih=757
Yamaha Motorcycle Wiring Diagrams
Yamaha XV 535 DX Virago Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha Virago XV535M Owner Manual

1996 Yamaha XV... | Answered on Jun 19, 2019 | 13 views


Kick stand up or down,clutch in or out? Tranny in neutral with neutral lamp on? Did it start after that one time or it hasn't since? Check switch contacts for both power and start,test start solenoid and ensure power down to starter
Check all ground points and clean em at block,frame and batt posts also. Coat all terminals with dielectric grease. Best corrosion protection.

Yamaha... | Answered on Jun 19, 2019 | 19 views


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.r1-forum.com/forums/4-mechanical-help/167682-2000-r1-tip-over-sensor.html
https://www.google.com/search?q=Tip+over+sensor+location+2002+Yamaha+YZF-R1&tbm=isch&source=univ&sa=X&ved=2ahUKEwiXteiw2fLiAhUxuVkKHXiWDZYQsAR6BAgFEAE&biw=1440&bih=757
http://www.journey.cz/moto/navody/Yamaha%20YZF-R1%2002%20Service%20Manual.pdf
https://www.partsfish.com/page/oem-parts-for-yamaha
https://ownersmanuals2.com/yamaha/yzf-r1-2002-owners-manual-56099

2002 Yamaha... | Answered on Jun 18, 2019 | 12 views


Hi, Anonymous and the usual suspects are:
1. Idle port, transfer ports, slow air jet clogged.
2. Idle adjusting screw set too low.
3. Air fuel mixture adjustment too lean.
4. Pilot/slow fuel jet clogged.
5. Faulty accelerator pump.
6. Float level too low.
7. Float bowl contaminated old fuel, water, dirt, rust, etc.
8. Carburetor bowl vent line clogged/blocked/pinched.
9. Fuel line to the carburetor kinked or pinched.
10. Fuel filter clogged.
11. Intake manifold leak.
12. The gas cap is not venting properly or fuel tank venting system blocked.
13. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
14. Needle and seat stuck closed in the float bowl.
15. Multi carburetors not in sync.
16. Faulty fuel pump or internal fuel line has pinholes.
17. Fuel injectors clogged or faulty.
18. Faulty throttle position sensor.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Idles fine but dies upon throttle
http://viragotechforum.com/viewtopic.php?f=6&t=31891
http://vintagedirtbiker.com/photos/Motorcycles%20and%20Projects/Manuals/Yamaha/Yamaha%20Xv%20250%20Virago%20Manual.pdf
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha VIRAGO XV250S Owner Manual

1995 Yamaha Xv... | Answered on Jun 18, 2019 | 16 views


Hi, Jonathan before testing any electrical component in the Starting Circuit it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead-acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Engine Run Switch is "FAULTY" or corroded.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
5. Bank angle sensor needs a reset or is faulty.
6. FOB battery low or dead.
7. Faulty ignition switch.
8. Faulty starter button.
9. Faulty kickstand, clutch, neutral safety switch.
10. Security alarm needs a reset.
11. Starter relay, solenoid, starter motor or circuit wiring faulty.
12. Starter armature or field coils have failed.
13. Main fuse or circuit breaker may be blown or faulty.
14. Faulty ignition relay.
15. The electric starter is working but starter clutch has failed.
16. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.r6-forum.com/forums/57-garage-mechanical-help/343026-07-r6-cranks-but-wont-turn-over.html
https://www.reddit.com/r/motorcycles/comments/dp1z7/help_r6_wont_start_just_clicks_whats_wrong
Yamaha YZF R6 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha YZF R6 Owner Manual

2008 Yamaha... | Answered on Jun 18, 2019 | 23 views


Hi, Beckie for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Hyosung, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Cam+timing+marks+2004+Yamaha+Royal+Star+Venture&tbm=isch&source=univ&sa=X&ved=2ahUKEwicy5CShfLiAhXss1kKHVc1BLYQsAR6BAgFEAE&biw=1440&bih=757
https://www.venturerider.org/forum/showthread.php?78990-Cam-timing-marks
https://www.manualslib.com/manual/1362718/Yamaha-Royal-Star-Tour-Deluxe-Xvz13cttc.html
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha Royal Star XVZ13CTV Owner Manual

2004 Yamaha... | Answered on Jun 18, 2019 | 12 views


It sounds like the carb jetting is plugged up so that carbs should be removed and cleaned! When you first start the bike keep it idling by having someone hold it on and at the same time light touch the front and rear exhaust pipes. The carb that is working will have a hot pipe and the one not working will be cooler or cold.

Yamaha... | Answered on Jun 17, 2019 | 41 views


need to replaces your starter coil which seems when it heats up crates short.

Yamaha... | Answered on Jun 17, 2019 | 54 views


First off, I put a brick under the kickstand to get my bike near level...then i gathered the tools needed. 5mm Alan Head (Hex) Bit, 8mm wrench, phillips head screwdriver, and a vacuum pump (not necessary but very helpful if you're doing it solo.

Attachment 51703

Next step is to remove the left rear cylinder side cover. three 5mm bolts hold this in place.


Unscrew and remove the resevoir cap and diaphram carefully. Cover your paint with a towel (I was probably a little overdue for a fluid bleed...)
Suck out the old fluid from the resevoir using the pump (or a turkey baster) and refill with new DOT 4 brake Fluid (or DOT 3 or DOT 5.1)
Attach a plastic tube to the clutch bleeder valve, set up your vacuum pump, and loosen the valve using an 8mm wrench.
Now, get to pumping...watching the level in the resevoir as to not let it suck any air. When the fluid coming out of the valve is clear, the system is flushed.
(NOTE: if you are doing this by hand, (1) loosen the bleeder valve, (2) squeeze and hold the clutch lever, (3) tighten the valve, (4) release the lever...then repeat 1 through 4 about 50 more times being sure to watch the fluid level in the resevoir)
Once you are done, close the valve to 4.3 ft/lbs and refill the resevoir. Then replace the diaphram and resevoir cap.
Put the rubber cover on the bleeder valve and re-install the left rear cylinder cover. Check the fluid is at the appropriate level...

Yamaha... | Answered on Jun 16, 2019 | 29 views


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.google.com/search?q=Wiring+diagram+Yamaha+Crypton&tbm=isch&source=univ&sa=X&ved=2ahUKEwi98fOi7uviAhXn1FkKHaQCCzsQsAR6BAgHEAE&biw=1440&bih=757
http://14.avds.instantramen.de/m15/yamaha-crypton-r-wiring-diagram.html
Yamaha Motorcycle Wiring Diagrams
https://www.scribd.com/doc/159403970/Crypton-R-Yamaha
https://www.partsfish.com/page/oem-parts-for-yamaha
YAMAHA CRYPTON T105E SE Owner Manual

Yamaha... | Answered on Jun 15, 2019 | 27 views


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://yamahaclub.com/forums/topic/26845-ybr125-fault-codes
Yamaha Fault Codes
Yamaha YBR 125 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
YAMAHA YBR125ED Owner Manual

2007 Yamaha Ybr... | Answered on Jun 15, 2019 | 69 views


In that case something in the cruise control circuitry is shorting to earth. Look for places where wires in the harness my flex or rub against the frame or bolts.

you are not alone and Harleys do it as well.
https://www.google.com/search?safe=off&rlz=1C1QJDB_enCA643CA644&ei=hZwCXbnMDpHQsAXTponQBg&q=yamaha+royal+star+cruise+blows+fuse+on+cruise+control

Yamaha... | Answered on Jun 13, 2019 | 17 views


yes be sure you mark everything. each gear to chain to engine.

before you remove tensioner wire chain so they stay tight on the sprockets when you remove the tensioner

Mike

Yamaha... | Answered on Jun 13, 2019 | 16 views


Hi, Jerri for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
How To Install Motorcycle Backrest Luggage Rack
https://www.youtube.com/watch?v=cI6MrYjyo-g
Honda V65 MAGNA Shop Manual
https://www.partsfish.com/page/oem-parts-for-honda
Road Motorcycles Owning Honda Honda MPE

Yamaha... | Answered on Jun 13, 2019 | 19 views


Hi, Anonymous for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://thumpertalk.com/forums/topic/877821-kickstarter-jammed-05-yz250
HOW TO UN LOCK DIRT BIKE THAT HAS ITS KICK START STUCK
Yamaha YZ250 Owner Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
http://mybikemanuals.com/yamaha

Yamaha YZ 250... | Answered on Jun 12, 2019 | 17 views


Hi, Mike and the usual suspects are:
1. Instrument wiring harness connector corroded.
2. Faulty power or ground wire at the tachometer.
3. Broken, loose or corroded tachometer wire at the coil.
4. Short between the ignition coil and the tachometer.
5. Broken tachometer cable.
6. Faulty tachometer.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
http://www.viragotechforum.com/viewtopic.php?p=277843
Troubleshoot Repair motorcleTurn signal light
Yamaha XV250G Supplementary Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
Yamaha VIRAGO XV250P Owner Manual

2005 Yamaha Xv... | Answered on Jun 12, 2019 | 20 views

Not finding what you are looking for?
Yamaha Logo

Ask a Question

Usually answered in minutes!

Popular Products

Top Yamaha Experts

vince

Level 3 Expert

1234 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

D. E. Hev

Level 3 Expert

1187 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...