The handle bar on our mutsy is wobbly, have tried to tighten screws on the top of bar but makes no difference. Please help!

Fridge doors normally have two screws on top of the door and another two screws under a cover on the face of the door. Tighten then just enough to snug them up.

This model comes with two types of doors. One with a single panel with integrated control on top or a two part door with control unit in front. The handle varies.

If you have a single door panel with handle bar across from right to left then you need to carefully unscrew the back panel screws and free up the front panel. the handle is screwed to the front panel from inside. Once you tighten carefully put the back door panel in and tighten. Take photos along the way to make sure you get back where you started. Also unplug dishwasher before working on it.

If you have a two part door with front control then handle and access to it is different. See diagram on this website for blow up of the panel and location of handle (part 713).

ESCUTCHEON DOOR ASSEMBLY Diagram Parts List for Model GLD5868V15SS GE...

You can magnify the image or take a full screen view for clarity.

Just bought it ... take it back. Bought if from a individual ... take it back. Wobbling is NOT good ... take it back make em fix it or get your $ back.

Perform the following procedure

to reset the Drum Unit counter
after you replace the Drum : Menu-->5+2+0+4 --> 1 (yes) + enter

There are screws that come up through the bottom. You may have to remove the faucet to tighten it. While you have it out, throw it away and buy a new one.

Go to a proffesonal manchanic

Hi,

To fold the Mutsy Urban follow these steps:

Stand slightly to the left of the pram, but have the handle bar (with button depressed) in your right hand. Have your left hand on the black cuff (on the left hand leg of the chassis)
In one movement, push in the button on the handle (with your right hand) and move downwards, whilst pulling the cuff upwards (with your left hand). Do this quite firmly and the pram will then collapse. Make sure that the handle is in the lowest position after folding, ensuring that the pram is as small as possible.

I hope this helps.

CONTACT MUTSY
LINK: http://www.mutsy.com/service/contact

Mutsy USA Inc.
500 International Drive | suite 120
Mt. Olive, NJ 07828
t. 973 691 5200
f. 973 691 5208

CONTACT MUTSY
LINK: http://www.mutsy.com/service/contact

Mutsy USA Inc.
500 International Drive | suite 120
Mt. Olive, NJ 07828
t. 973 691 5200
f. 973 691 5208

Hi guys, I had this problem when I first got my urban rider - the trick is to put the seat on correctly in the first place. If you look under the front of the seat (when seat is facing away from mum/dad) you'll see 2 plastic hooks - these need to be hooked over the first horizontal bar of three that you can see (it has a small black plastic nobbly bit on it) then, as you were doing, push the handle and pull the 'tube'. If the seat is facing you (child travelling backwards) it won't fold, neither will it fold with the carry cot attached.
Hope this helps! Tegans mum x