Where is the oil fill hole on a stratoliner 2006 1900

If the fill hole is on the top, fill it all the way, if the fill hole is on the side, then fill up to the hole

my 06 stratoliner dose the same thing i have found that the oil on the dipstick cant be lower then 2/3 down on hashmarks... if it stalls i top off the oil.. i cant find an oil leak...

HI. On the strat the fill plug is just behind the rear exhaust pipe about one inch or so to the rear. You need to loosen the front exhaust header nuts (don\'t remove 17 ft. lbs. ) remove the rear header nuts (these are allen style 14 ft. lbs.) pull the rear header out of the exhaust port. Use a torque wrench or they will leak. Now you have enough room to install the allen wrench into the fill plug. This plug is about 1 1/2 in diameter. It is a big pain to do. Don\'t loose the exhaust gaskets or just buy new. They are about $12 each. I have reused them just a couple times then install new.

Is the bike sitting level? There is an inspection hole, and a filler hole behind the exhaust. Which are you using? Should be filled to the bottom of the inspection hole, about 1/2 quart.

Your next service will be at 8000 miles. It would be recomended to service your engine by changing the oil and filter every 4000 miles.

If you are talking on a stratoliner there is no trans oil. It is the same as the motor oil.