How to install street fx accent lights - 2005 Yamaha YZF-R6

If all the brake lights come on ( including high mount ) with the headlights there is most likely a short somewhere. Have any of the park/brake light bulbs been changed recently. If so a bulb may be installed incorrectly or the wrong bulb application used.

if the engine has stopped and when you try to start, it turns over fast but no ignition is looks like your timing belt has gone. open the bonnet and open the oil filler cap. with second person starting the engine. ifyou look inside where the oil gets filled and you you dont see the cam turning this indicates the belt is not turing. if it is turning then it is a different issue. these belts should be changed at set periods on your service schedule usually around 100000 miles. you might be luck if this is the case that only the belt needs to be put on and timing set up. if not you may have a damaged engine as the pistons may have hit valves as they where not syncronised due to the belt failure.

i hope this was useful

Watch the YouTube video and see if that answers the general questions. Click this link

I would install the fog lights off of ignition battery, (power when key is on), connecting thru the headlights could put too much current draw on the headlight circuit.

Take it to a competent electrician -- it's obvious the folks at the garage don't know what they're looking at.

often its the fuel filter thats beginning to clog,will give lean code,i would chge it.

you should set the display properties to low

ive got a 1994 1.3 accent and now its spluttering was does it mean ?

hi not sure of your location? uk? or where? but will try to help i have a dealer you can call ? who deals solely with braking systems cars/ bikes/ hgv trucks etc BRAKES INTERNATIONAL , MOORE STREET ,. ROCHDALE , LANCASHIRE UK TEL No 01706 666999 describe your brakesparts that you req and make model reg/year of car ? feel sure they can help and have post /delivery service hope this is helpful ?