Abs and servo plus speedo stop working - 2005 BMW R 1200 ST

Probably is the common issue with Saab (Bosch) ABS module. Had same problem with 2003 9-3 SE. Removed it, had module remanufactured (~$150), reinstallled - fixed problem. Google to find more info.

speedo works from the output shaft of the transmission not from the abs
the abs only comes into action when the brakes are applied and a wheel/els loose traction and stop turning
the abs release the pressure to that wheel brake so that it can turn again

Ive just removed the ABS / Servo pump from my 2006 R1200GS. I also by passsed the hydraulics. Now my speedo wont work!!! Does any have a work around??

I just had a non abs spindle put on my 06 corolla and my speedometer stop working and I have an abs light on now
so i am gonna try to put an abs spindle on and recconnect the abs sensor
hopefully that is the problem just an abs sensor connection

abs module

engine light on and tc plus no power on vectra 2.2 sri anyone knows what it could be thx

2000 vectra the dash light and fog lights dont work can you help

The OD light flashing indicates a code has been stored in the trans control module. If the speedo stopped working that could be the whole problem, the most common thing for the speedo quitting is the sensor on the top of the rear end housing, that causes 99% of the speedo failure. If that sensor isn't working the ABS light would be on too (if equiped) I would try that first or get a code pulled out of the computer and I could give you a more complete answer. -Jared