Question about 2007 Harley Davidson FLHX Street Glide

1 Answer

Right speaker went out.. Opened fairing and tested speaker by hooking up to left wires... Speaker works so I'm hoping that the wires don't need to be replaced... Any suggestions?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 960 Answers

If the RH speaker works when you conected to the LH side, I would suggest a wiring problem to the RH side... You may have to ferret out where the wires go to find a bad or broken connection. It may sound stupid, but make sure you havent got the "balance" control on the stereo set to left only.. Make sure its in the middle so both speakers are supposed to be working... Hope you find out what it is... Cheers

Posted on Aug 04, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I don't know how to hook up the speakers


hooking up speakers is easy you if your terminals are red and black you just match them up black on speaker means hook to black on the receiver doing a wrong hookup can reverse the phase of the speaker cause a distortion and eventual damage to speaker and coil.if you are rtunning just a stereo that allows two speakers select speaker you want for left side and put that on left of the stereo and hook it up as left and same for the right and if you have a home theater you hook it all up the same but you hook up the center put it in center front of the room as far back to wall as you can but dnt cover it up it should be lower than the front left and right or the main left and right speakers.then if the5re is surround you put those like say you have a square room you put them in the corners on the back wall.if you have rear speakers you put them on the back wall.make sure all speakers excepty rthe center are level and equal distance apart

Mar 20, 2013 | Audio Players & Recorders

1 Answer

2004 Chevy Cavalier I have a regular stock radio that the display works, you can change the channel, work the CD player but there is no sound output.


To diagnose this you need to remove the cd player. Then check that the wiring looks good. Then check your speakers themselves. If this fails to find anything, you need to check the wiring to the speakers. Remove the harness from the back of the cd player. Now use a multimeter set to continuity test to probe the speaker wire at the harness and at the other end where the speaker is (with speaker unhooked). If there is continuity from pos. to pos. and neg. to neg. the wiring to the speakers is good. But if probing for instance the positive of the front left speaker at the harness and speaker area you notice both the wires down at the speaker have continuity, you have short circuited speaker wires. This would cause at least the speaker hooked to those wires to not work. It may even cause none to work. Check all the speaker wires for proper continuity. If you still don't find anything I would guess that you need a new cd player. I know that cavaliers had some sort of antitheft in the cd player but I'd assume if it was the problem the cd player would just not function at all.

Sep 19, 2011 | Car Audio & Video

1 Answer

Durabrand Home Theater System Model HT-3917. It was playing ok a little crackle from the front side speakers for a couple days now and it just went off. I checked the fuse no,I checked the power strip and...


You (we) still don't know if the speaker or electronics are at fault. Swap the speakers left-to-right. Use test tones to test all channels. Could be a loose speaker wire, too.

Jul 24, 2011 | Durabrand HT-3915 System

1 Answer

Bose free space 51 speaker pair. 1 speaker stopped working. I disconnected non working speaker and hooked up at the working speaker wire and it still didn't work. don't know how to take it apart to...


In my case the speaker only played the higher frequencies but not the low mid range to base. Most likely your speaker is "blown". Outdoor use is hard on electrical components. The fix is easy. The free space 51 speaker is identical in size to the standard Bose 901 4 1/2" speaker. You can buy a Bose or a good quality knock off (either way they will need to be broken in before yielding the best sound). It is not clear to me whether the original Bose uses a special moisture resistant cone. I treated my replacement with a light coating of silicone spray (for upholstery) carefully protecting the foam surround and cap at the center.

Just unscrew the three screws holding in the plastic grill in front of the speaker (using a nut driver or socket wrench). The speaker will drop out. Be careful with the foam wrap around the wire as it tends to be fragile and greasy. Solder in the new speaker making sure you get the polarity right (although for outside use this is probably irrelevant). I would test the speaker in place before soldering just to make sure. Reassemble and break in the speaker. Again I don\'t know know well the replacement will weather the elements. Keep your finger crossed.

Jul 23, 2011 | Bose Free Space 51 Main / Stereo Speaker

2 Answers

I have an older JVC Shelf Unit with the main control unit in the middle and a left and right side speaker that contains a built in subwoofer on each side, lately the Speaker cuts in and out at higher...


It's one of three things things:
First, examine where the speaker wires are plugged into the receiver. Are any of the copper strands touching one another? If so, remove the excess stripped wire and reinsert it. Problem solved.

Test two: bad speaker. to test, swap the speakers (hook the right speaker to the left speaker jacks and the left speaker to the right speaker jacks). If the RIGHT side now cuts out, you have bad speakers.

If the speaker on the LEFT jacks still cuts out, your amplifier is going bad (which could cost between $50-$200 to repair).

Jul 01, 2011 | JVC Audio Players & Recorders

1 Answer

I have a Pioneer VSX 452 receiver. I am trying to run a second set of speakers off the b channel and use the a and b switches on the front of the receiver. If only the a channel is depressed the two...


Hello,
Thanks for the detailed explanation...
It seems to be there is a short or misplaced (+) (-) leads on the speaker connection you made..sometimes a tiny cable piece can make a short in between the leads and cause such problem..My recommendation is:
** take all the wires off..
** install only B speaker leads and test it..( make sure LEFT and RIGHT (+) and (-) leads properly
and individually connected to the right places on the back......it is important...This causes balancing problem..
** if it works fine...
** than go ahead and install the A speaker leads..and test it..
if you do everything properly both A and B speakers should work fine as independently ...

Take care and if it succeeds please Remember to rate/vote and give me 4 Thumbs Up
for Helping out the Community :)

Hope this helps!

Jun 22, 2011 | Pioneer VSX-454 Receiver

1 Answer

I am trying to hook up a Sony PS-LX250H to a Pioneer Receiver VSX-D412 I can't get any thing to work. They both come on, so I know that I have them hooked up incorrectly. I am an old woman, so if an...


Hi there,

this should be fairly straight forward so here we go.

Firstly, do you have your speakers connected properly? If you get sound from anything else plugged into your amplifier, then all is good here.
If you have not used the amp ever before then I will try to explain all.

You should have at least 2 speakers attached to the amplifier. Each speaker has 2 wires (1 positive, red or + and one negative, black or -) Have a look on the back of the amplifier and you should have e series of connections for the speakers, these are also marked in the same way as the amp. the connections will be marked as;
FR - Front right FL - Front left RR - Rear right RL - Rear left C - Centre
Fairly easy so far. If you are just listening to music then unless you want surround effects then 2 speakers will do.
Now to the record player. Again should be fairly easy, you should have a twin cable with red and white plugs on the end and there may also be a thinner wire maybe with a small metal horseshoe on the end. On the rear of the amplifier, look for sockets marked phono. The right and white twin wire plugs in here. As for the thin wire, there should be a thumbscrew on the back of the amplifier, unscrew this and attach the thin wire here.
Now when it is all switched on and you select phono on the amp you should have sound
hope this helps

May 07, 2011 | Pioneer Audio Players & Recorders

4 Answers

MDR-NC6 Sony Noisecancelling headset


I think I have it. I've only had a chance to listen to a couple of songs till the brand new headset's right ear died. I took it apart and found that when I hook up another speaker in parallel with the dead one, it works, which can only mean that the circuit is fine and the 'dead' speaker is really dead. No idea where to get a replacement though.

Aug 05, 2008 | Sony MDR-NC6 Consumer Headphones

2 Answers

Left channel not working


The first thing I would check has already been done, the only other thing would be fuses. I am preety sure there is a protection fuse at ever channels output to protect against a dead short. I am sure you have already fixed this problem but I thought I would give it a try. Let me know what you found.

Jul 13, 2008 | Denon AVR-3802 Receiver

1 Answer

Right speaker doesnt have sound


1ST.-The right jack could be damaged!!
Usually, there is a [+} posaitve & [-] negative input\output to speaker connections. Not all [-]neg. is ground.Sometimes the [+] pos. is grounded. [The exception to the rule is that u SEE the black wire going to ground] the reason I am letting u know this is that u can test the INSIDES of the sound system.
If u can get inside of the unit. Cut the left speaker output [+] posative from both outputs. criss\cross wires.Place left speaker output to right speaker jack[ that does not work!!] & visa versa.If the [LEFT Output] stops working after u plug in the speakers,the internal RIGHT output is damaged. NEEDS TO BE TESTED
If nothing nothing changes.The left still works & the right still does not work, then it is the jack (shorted ?, opened internally ?)

Jun 11, 2008 | Logitech Z-2300 Computer Speakers

Not finding what you are looking for?
2007 Harley Davidson FLHX Street Glide Logo

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...