Question about 2000 Yamaha YZF-R1
Hi, Tom for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Overheating problems on 99 R1
R1 Overheating what could be the reasons
2000 2001 Yamaha YZF R1 Service Manual R1 Moto Data Project
OEM parts for Yamaha
Posted on Aug 31, 2016
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your tire pressures should be 250 kPa (2.5 kgf/cm2, 2.5 bar, 35.6 psi) for the front, and 290 kPa (2.9 kgf/cm2, 2.9 bar, 41.3 psi) for the rear.
I wasn't sure of your country, so I posted all.
Hope this helps
Posted on Mar 18, 2009
SOURCE: yzf r1 03 gear prob or?!
Sounds like bent shifting fork which is expensive. If you are not the 1st owner then you don't know how previous owner treated bike. Often sportbikes are rode hard and banged into 2nd gear which can eventually cause tranny problems like bent shifter fork. First look down by the shifter pedal and inspect that it is fastened securely to the shift rod coming out of the engine/trans case. There is a single bolt that holds the shift lever on a splined shaft and can come loose and cause problems.
If that is ok then find a local mechanic you trust....Good Luck !
Posted on May 08, 2009
make sure your gas cable isnt binding (like dry never oiled) somewhere, that happens sometimes withjust a bit of exta heat. plugs have nothing to do with it. choke could be comming on (loose or binding) or not shutting off which would cause the rpm to go up as its warming. carb low idle screw is out or the worst-ignition module/computer screwed
Posted on Jun 14, 2009
Tips for a great answer:
Sep 14, 2012 | 2008 Yamaha YZF-R15
Aug 03, 2012 | Yamaha YZ 125 Motorcycles
Mar 31, 2012 | 2004 Yamaha YZF-R1
Jul 22, 2011 | 1999 Yamaha YZF-R1
Jun 28, 2010 | 2000 Yamaha YZF-R6
Sep 22, 2009 | 2008 Yamaha YZF-R15
Jul 01, 2009 | 2002 Yamaha YZF-R1
Mar 20, 2009 | 1998 Yamaha YZF-R1
35 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: