Question about 2000 kawasaki VN 1500 Vulcan Classic Tourer Fi

Open Question

I just bought my 1999 Kawasaki Voyager XII 3 days ago. It has 64,000 miles on it. It was 78 miles home from the dealer and the bike ran great. I went out today, it started right up, but every time I let out the clutch it dies immediately. It idles fine.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: Need service manuals for Kawasaki voyager zg1200 b4

www.zg1200.com

Posted on Nov 05, 2011

  • 254 Answers

SOURCE: need a (free) wiring diagram for headlight on 91 Kawasaki Voyager

try this site http://www.manualz.info/

they have mauals online for a lot of bikes.

hope this helps

Posted on Jan 04, 2009

flh1
  • 36 Answers

SOURCE: kmx 125 engine knocking

Check the piston to cylinder clearance.You very well could have wore either the piston and/or the cylinder.
Also check the rod for up/down play.Running out of oil could have ruined any bearing in the motor.

Posted on Jan 29, 2009

DickCanFixIt
  • 948 Answers

SOURCE: Friend layed his 2004 Vulcan over today..after

Sidestand switch broken or moved? If the switch does not detect the sidestand is retracted it will kill the engine when it is put in gear.

Posted on Apr 04, 2009

vortash
  • 431 Answers

SOURCE: 1992 kawasaki Vulcan 750 stops running

Sounds like what you realy need to do is remove the carb jets and give them a good clean , this if I am right is the twin V 8 valve engine with twin Klhein carbs , make sure also your air filter is not dirty and check tank fuel filter ,, other than that you may be intrested in the manuel obtainable from this site
http://www.haynes.com/products/sfID1/8/sfID2/9/sfID3/81/productID/399
hope this helps good luck .. and Live long and prosper lol .. Regards Vortash

Posted on May 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2001 kawasaki voyager 1200 remove front cooling tube off engine to replace o rings...how do you do this


Hi, Scott for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.amervoyassoc.org/forum/viewtopic.php?t=7993
Kawasaki Voyager XII fairing removal
Kawasaki Voyager XII Service Manual
OEM Parts for Kawasaki
http://www.kawasaki-techinfo.net/showOM.php?view_lang=EN&spec=US&book_no=99920-1983&lang_code=EN

Feb 14, 2017 | kawasaki Motorcycles

1 Answer

1986 Kawasaki voyager xii stopped for gas then push start button has nothing push starts up


Hi, Steve and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty kickstand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
American Voyager Association
American Voyager Association
Thread Starting problem
Kawasaki Voyager XII Service Manual Page 3

May 18, 2016 | kawasaki Motorcycles

2 Answers

What is the proper front tire size for a Kawasaki voyager 1200 1986


Hi, Brian 130/90-16 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Kawasaki, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Kawasaki Voyager XII Service Manual
OEM Parts for Kawasaki
http://www.kawasaki-techinfo.net/searchOM.php?view_lang=EN&spec=OC&
Kawasaki ZG1200 Voyager

May 15, 2016 | kawasaki Motorcycles

1 Answer

Kawasaki Voyager xii 's cruise set light stays on,the bat light stays on and the neutral light will not light


the computer in you vehicle tell them when to come on and off. you might wanna get it tested.

Dec 28, 2012 | Cars & Trucks

1 Answer

2002 Voyager xii on warmer days when coming to a stop the engine goes into a high Idle 2000-2500 rpm. Dragging the clutch enough to slow the engine down will make it idle normally until the throttle is...


Hi, Vetter596 and the usual suspects are:
1. Throttle cables improperly adjusted, pinched or need lubrication.
2. Idle adjusting screw needs to be backed off.
4. Air fuel mixture adjusted too lean start with 2 full turns.
5. Intake system air leak.
6. Fast idle choke ramp is not releasing.
7. Broken throttle return spring.
8. Damaged diaphragm or slide.
9. Faulty MAP, TPS, ATS, O2, sensors or wiring/connector.
10. Multiple carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
American Voyager Association
American Voyager Association
2003 Patrol RPMs will not drop to idle when warmed up
Kawasaki Voyager XII Service Manual
OEM Parts for Kawasaki
1989 Kawasaki Voyager XII Owner Manual

Jun 15, 2017 | kawasaki KZG 1300 Motorcycles

1 Answer

No gauges and no lights


check the battery terminals, it might have been displaced or else there would be some lose connection..............have a nice day :-)

Jun 16, 2009 | kawasaki Full Suspension Mountain Bike Men

1 Answer

Need a (free) wiring diagram for headlight on 91 Kawasaki Voyager


try this site http://www.manualz.info/

they have mauals online for a lot of bikes.

hope this helps

Jan 02, 2009 | 2001 kawasaki ZRX 1200 S

Not finding what you are looking for?
2000 kawasaki VN 1500 Vulcan Classic Tourer Fi Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...