Question about 2005 Honda CB 750

1 Answer

I have a 1981 Honda CB900 and #1 and #3 cylinders won't fire. Any Ideas?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,418 Answers

Possible bad coil, or wiring loose. Number 1 and 3 are on the same coil, 2 and 4 will be on the other coil. Get under the fuel tank and check for loose wiring at the coils. If you have an Ohm meter, ohm out the coils for test one against the other. Hope this helps Fix Ya up.

Posted on May 28, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1981 Honda Goldwing gl1100 when I start it the right side pipes are hot and the lift side pipes are cold what is the cause


Hi, Terry probably because the cylinders those pipes go to are not firing check your spark plugs, cables and ignition coils for more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
http://www.lillerolf.com/Manuals/index.html
Honda Gl1100 Gold Wing 1981 Usa parts lists
http://www.goldwingworld.com/pdffiles/Honda-GL1100-Interstate-1981-Owners-Manual.pdf

Jan 11, 2016 | 1981 Honda GL 1100 Innerstate Gold Wing

1 Answer

1981 Honda GL 1100 Interstate cylinder 1 and 4 firing on valve overlap


Hi, Anonymous that's because you have a dual fire ignition system for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
1 cylinder does not working GL1100 Information Questions goldwingdocs com
GL1100 Not firing on 1 and 3
Honda GoldWing GL1100 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Gold Wing GL1100 Owner Manual

Apr 23, 2014 | 1981 Honda GL 1100 Innerstate Gold Wing

1 Answer

2002 honda vt 750 shadow spirit one cylinder won't fire what's the problems


Pull the plug out and test it on the frame. If no spark you need new plugs. If it does spark look at the plug. If the plug is black and wet it is getting to much fuel and flooding. You will need to adjust your carb's air to gas mixture.

Apr 02, 2013 | 2002 Honda VT 750 CD Shadow A.C.E. Deluxe

1 Answer

What is the firing order of 1981 gold wing gl-1100 engine


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
1981 GL1100I fireing order GL1100 Information Questions goldwingdocs com
1984 GL1200 cylinder order
Honda GoldWing GL1100 Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda Gold Wing GL1100 Owner Manual

Apr 26, 2012 | 1981 Honda GL 1100 Gold Wing

1 Answer

My 1998 Honda civic ex won't move but the motor


Have you just replaced the clutch? Taken out the transaxle, and put it back in? Are you sure transmission was in good condition before this? If so, review your procedure carefully to be sure you got it all back right.
Watch the slave cylinder while someone depresses clutch. You should see the little plunger move slightly out and move the clutch lever back. The lever moves the release bearing inside bell housing into contact with the pressure plate. If slave cylinder doesn't move at all, try bleeding again. The plunger has to move when clutch is engaged.
I'm not sure what you mean by "will shift but won't go into gear". You mean it's actually going into a gear position and car won't move? Or it won't go into any gear, period. As if you had no clutch?

Nov 06, 2011 | 1998 Honda Civic

1 Answer

Trouble bleeding front brakes on GL1100 (1981), no apparent leaks & tried new master cylinder, any ideas please


If there is air in the master cylinder ,then it will not pump fluid. Try loosening the banjo bolt holding the brake line onto the master cylinder and pumping the lever a couple of times till the brake fluid gushes past the sealing washers. Then tighten the banjo bolt and bleed the lines. Once the master cylinder is pushing DOT 3/4 brake fluid then bleeding the lines should be easy.

Sep 21, 2011 | 1981 Honda GL 1100 Gold Wing

1 Answer

Honda cx500 only fires on 1 cylinder


Gary,
Pull the bowl from the left carb and remove and clean the float needle and jet. It sounds to me that this passage is plugged. You might as well clean the whole set since you have it off.
It is a common problem for those carbs on the older bikes for the jets to plug up from old gas, or material such as rust in the tank. Check your fuel filter if you have one. If not I would suggest you install one when you are done.

Mar 11, 2009 | 1981 Honda CX 500 B

1 Answer

Not hitting on all cylinders 1999 honda shadow 750 with 5000 mile


HI harleyrider6,
No hitting means not firing?
Assuming tht its not firing up upon cranking,
please check if theres gas coming to the spark plugs and sparks too.
Not a bad idea to replace the spark plugs if they are fouled up!

Good luck.

Knight.. (Yamaha Seca XJ750A 1981)

Feb 12, 2009 | 1999 Honda VT 750 CD Shadow A.C.E. Deluxe

Not finding what you are looking for?
2005 Honda CB 750 Logo

491 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...