Question about 2004 Honda CR 125 R
This sounds like a problem with "idle mixture" There is usually a simple screw with a spring around it on the carb to adjust it. With the engine running warm and idling, be sure that the choke is wide open, and turn that screw in (clockwise) a half a turn. From there, fine tune clockwise to the point that the engine runs rough or 'surges' . Then back it out counterclockwise ¼ turn. That usually gets the fouling and poor running back to normal.
Posted on Apr 03, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Reason is pretty common as these 2 stokes and all 2 strokes they really only designed for one thing - Wide open throttle ! Race track performance. short bursts of flat out to clear all fuel and oil enough to idle through tight corner then straight into wide open throttle again.
Some alternatives for you to try would be lean out the fuel air screw just tiny amount 1 / 8th off a turn in. See if bit leaner setting helps your low RPM a bit also you could consider less oil in the fuel mix 32:1 is pretty high on oil. Most would run these at around 40:1 at the track you don't need to make big changes just adjust to 36:1 first just to check the results - you will soon know if is improvement or not ?
Only change one thing at a time then test ride or you will never know the right direction if the change helps then great but if no change or worse, put it back to original setting and try something else until you find the right direction If the bike is at its best flat out then there cannot be to much wrong thats actually perfect really! so just some very fine tuning should get you where you want to be - Good luck! regards Jamie
Posted on May 27, 2011
Tips for a great answer:
Nov 17, 2011 | 2006 Ford Freestar
Sep 04, 2011 | FUJIFILM instax mini 7 Digital Camera
Aug 08, 2011 | Sylvania LD195SSX 19 in. LCD TV
Jul 16, 2011 | Star Micronics Receipt Printer TSP800...
Jul 15, 2011 | Black & Decker 18V Cordless Drill/Driver
Jun 18, 2011 | BenQ MP610 Multimedia Projector
May 27, 2011 | 2004 Honda CR 125 R
May 04, 2009 | Autodesk AutoCAD 2006
57 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: