Question about Harley Davidson FLHTCUI Electra Glide Ultra Classic Motorcycles

1 Answer

I have a 2010 harley ultra that i wish to tap into the brake, running light & ground. how & where do i do this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

All these wires are on a sub-harness. Follow the wires up and tap on in the plug if you can. Keep in mind that this circuit is protected by a fuse. If you add other lights and stuff to the circuit, you may start blowing a fuse. If you simply put a larger fuse in the slot, you give up the protection of the wiring that the fuse is designed to deliver. If you ever get a short, you're wiring will burn before the fuse blows.

Good Luck

Posted on May 27, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

NNeed torque specs for 2010 harley ultara classic, front axle nut, front brake calipers, axle nut holder

Front Axle = 60 to 65 foot pounds

Front caliper banjo bolts = 17 to 19 foot pounds

Front Brake disk screws = 16 to 29 foot pounds

Front caliper mounting bolts = 28 to 38 foot pounds

Front axle holder nuts = 132 to 180 inch pounds

Aug 23, 2014 | 2010 Harley Davidson FLHTCUTG Tri Glide...

1 Answer

What are the torque specs for 2010 harley ultra classic, front axle nut, front brake calipers

Front caliper -

Brake Pad Pin = 75-102 INCH lbs.

Caliper to Fork Bolts = 28-38 FOOT lbs.

Aug 23, 2014 | 2010 Harley Davidson FLHTCUTG Tri Glide...

1 Answer

Last year I put LED lights/signals on my 2010 Ultra. Last week the left rear turn/running light stopped working completely. Any ideas what may be wrong? I looked at the connections into the rear brake...

Check for power at the light connector, if there is none go back up the line and check at the next connector etc if there is power at a connector then there is an open between that connector and the last one that had no power. If there is power to the light assembly itself then the assembly must be defective but you could bring known power and ground directly to it on the bike or on the bench, obviously if it works then the light assembly is good and if it does not work then the light assembly is defective.

May 10, 2014 | 2005 Harley Davidson FLHTCUI Electra Glide...

1 Answer

2003 Harley Ultra no brake lights

Hi Anonymous, check the connection at the rear fender wiring harness, inspect for corroded, broken or loose pins. Check your brake relay if you have one. For a free wiring diagram please visit the website below:
Harley Davidson Wiring Diagrams and Schematics

Jan 09, 2014 | Harley Davidson Motorcycles

1 Answer

Brake replacement for 2010 Harley Davidson FLHTCUSE5 CVO Ultra Classic Electra.

Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day.
How to Replace the Brake Pads on 2008 Harley Davidson Road Glide

Aug 12, 2013 | 2010 Harley Davidson FLHTCUSE5 CVO Ultra...

1 Answer

2010 street glide schematics

Hi Anonymous, 4 out of 5 Harley Gods give this one a thumbs up, but just to be on the safe side contact your local dealers parts department for confirmation. Good luck

May 02, 2013 | 2009 Harley Davidson FLHTCU Ultra Classic...

1 Answer

Brake lights stay on on 2007 ultra classic. Tail light and tour pack

The most likely cause is a stuck brake switch, probably the foot brake switch. Remove the switches and exercise them then refit. Should fix it or tell you which one has failed.

Aug 01, 2012 | Harley Davidson Motorcycles

1 Answer

Wiring on a harley tour pack running lights and brake light. 3 wires - red/blue/ black. What is each color for?

Red-brake light,blue-running lights,black- ground,take a test light and check your wires from the bike,black to ground and positive to your wires and see if the test light works for your brake and running lights when checked individual,safest way to check if the harness don't plug up correctly...

Apr 07, 2010 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Broke the front fork axle nut on a 2010 ultra.

If you have damaged or stripped the thread ,you need to replace the bolt & nut .Don't trust to luck . Buy a new part .safety first at all times .

Mar 22, 2010 | 2000 Harley Davidson FLHTCUI Electra Glide...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers


Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides