Question about 2006 Harley Davidson FLHTCUI Ultra Classic Electra Glide

1 Answer

I have a rattle soundcomeing from the motor may be rear cylinder. keeps time wit6h the motor its perty loud . sounds like a clatering sound the valves ? please help

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,591 Answers

Check the torque on the overhead cam clamps (upper bearing)...the cam is probably jumping, and the bolt holes for the clamps (bearings) may even be stripped, in which case you'll need some heli coils to torque the bolts back in.

Posted on May 27, 2011

  • Bill Kennedy
    Bill Kennedy May 27, 2011

    wouldnt that affect the proformance? it runs great just sounds like it is going to come apart

  • Norman Skinner
    Norman Skinner May 28, 2011

    It hardly affected the performance on my bike, but it sounded really bad, and I was amazed to find stripped bolt seats when I took it apart! I'm glad I ripped it apart before all the bolt holes striped!

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the rear tailgate inner panel so i can replace the wiper motor and sort out an annoying rattle??


Most door panels have push lock retainers you just have to pull the panel off by prying around the edge. they make a special tool for this but you can use a flat screwdriver just pry close to the plastic pins under the panel

Feb 06, 2016 | Cars & Trucks

1 Answer

W6444. What causes it to make gentle rattling sound while running, washing?


after the machine has finished , try removing the agitator and check for a button, bra wire or coins

Jul 15, 2015 | Asko Washing Machines

1 Answer

Y is my 91 miller running but won't idle up when strikes an ark and dies?


ya get both cylinders to fire and check that your idle up chain from selonoid is working to keep idle going

Sep 18, 2014 | Cars & Trucks

1 Answer

Rattling sound during acceleration..is it ok to use 95 octane gas instead of 91 mybe the rattling sounds will disappear??


that would be an option-but you have a deeper problem that could destroy your motor-your engine rattle may be the timing chain for the valvesor it could be detonation which is the cylinders are firing just a little too earlybefore the piston reaches tdc -there should be a sensor that stop this from happening -take the car to a shop before you have a totally blown motor-Denny

Nov 05, 2013 | Hyundai Cars & Trucks

1 Answer

My 2000 Subaru Outback has a loud rattle from the rear gate (ie door)


Check your rear stabilizer bar an make sure that all the bolts are still intact. You may also want to crawl under the vehicle and give your muffler a shake to ensure that no mounts are missing. these are the most common issues associated with rattling from the rear of vehicle.

Apr 18, 2012 | 2000 Subaru Outback

1 Answer

Fridgeair dishwasher not working making loud sound. water comes in and I can make it drain out but washer does not start


Hello

bearings in the heater fan may get worn out or rust. If this happens, it may become very noisy, either grinding on the bearings, or scraping against the rust. If this happens you need to replace the fan motor. Sometimes, a fan blade may come loose, and you need to replace it.
Sometimes it's the motor that makes the noise you hear. The motor has bearings in it which may become worn or get rusty. When the bearings get worn, they allow the shaft to wobble which can get quite loud. If there is a spin seal leak, water may get inside the motor, washing the bearing grease away. If the spin seal is leaking, you'll notice water leaking from under the dishwasher. There is also a disc attached to the top of the motor called a slinger. It sometimes breaks off and spins around the motor's shaft while it turns, causing some noises. You will need to replace the motor if the bearings are bad. You also need to replace the motor if the slinger is broken as well.

Newer dishwashers may make a squealing or rattling noise on the first run. This is because it has not had any water in it yet, and the motor seals are dry. You may hear this in a unit that hasn't been run in a week or more as well. You should operate the dishwasher regularly to keep the sump water from getting smelly, and to keep the seals lubricated. You can add a quart of water to the sump before running it.

Rattling noises may be produced by dishes rattling inside the dishwasher due to the water pressure from the sprayer arms on the dishes. To determine if the rattling is a loading issue, run the unit empty. If the sound is persistent, it may be that there is debris in the pump.

dishwasher water-inlet valves are noted to make a hum that lasts about 60-90 seconds several times during a washing cycle. This hum is a different hum than the sound of the motor running.

A rhythmic knocking or thumping sound may be caused the sprayer arms hitting something as they go around and around. Rearrange the dishes and resume the wash.

A clunking or clanking may be heard when the detergent cup opens; while a clicking sound may be produced by the timer or electronic control panel.

A solenoid makes a snap sound when it opens. This happens about six times during each load.

Pipes rattling or banging may be caused by a water hammer effect. Water hammer sounds are caused by a valve closing in the system, and yet the water in the pipe is still flowing because of its kinetic energy. The sound is caused by the water slamming into the closed section of pipe. A plumber can install an anti-hammer device.

Small objects can sometimes get stuck in the pump. When this occurs, you'll need to open the pump and then remove the item that is making the noise or replace the pump. The dishwasher pump is usually mounted directly to the motor and runs off the motor as well. The pump is also attached to the bottom of your dishwasher.
Send this page to your printer

Aug 06, 2011 | Dishwashers

1 Answer

Rattling sound and vibration while spinning


The spin bearing or basket drive may be worn or seized. These components allow the inner tub to spin freely inside the outer tub. When this is the problem, you usually hear a loud sound during the spin cycle. The other possibility can be faulty motor causing the bearing to rattle/. Check out both the motor as well as spin bearing. You can get required parts from www.repairclinic.com

Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Aug 30, 2010 | Samsung SW62ASP Top Load Washer

1 Answer

2010 Honda Odyssey rear rattle and engine light


sounds like a trip to the dealer, thats what warrantys r 4

Apr 18, 2010 | 2009 Honda Odyssey

1 Answer

2002 mustang makes rattling sound when accelerating...


Possible bad motor mount(s) --only thumps or rattles when power is going to the wheels.

Jun 12, 2009 | 2002 Ford Mustang

3 Answers

Engine noise at cold start-up.


Sounds like your oil pump inside the engine is not pumping oil fast enough when you start your vehicle its common problem for mitsubishi motors my car does the same thing.

good luck

Nov 04, 2008 | 2002 Mitsubishi Montero

Not finding what you are looking for?
2006 Harley Davidson FLHTCUI Ultra Classic Electra Glide Logo

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...