Question about 2010 Piaggio X7 Evo 300ie

Open Question

The under seat storage lock is not opening when the ignition key is pushed in on my piaggio x7 is there a simple way to solve this.

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have lost my key, How to open my suzuki access 125 seat with out key?


If you misplaced your key and want to open the seat storage of your Suzuki Access then, you just have to twist the ignition hole that is provided in your scooter and it will unlock your under-seat storage. For more clarification, I have provided a video to to open Suzuki Access125 seat lock, have a look

Jun 14, 2017 | Suzuki Motorcycles

1 Answer

How to replace steering lock & barrel on piaggio fly 2013


Hi, Peter for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
VESPA STEERING LOCK REMOVAL AND REPLACEMENT
replacing parts 200 cc scooter same for vespa ignition key
Piaggio Fly 150 4T Workshop Manual
Piaggio FLY 150 2005 Parts
http://www.wotmeworry.org.uk/manuals/More%20Manuals/Piaggio/Piaggio%20Fly%20150%20Owners%20Manual%20Chapters%201-3.pdf
http://www.wotmeworry.org.uk/manuals/More%20Manuals/Piaggio/Piaggio%20Fly%20150%20Owners%20Manual%20Chapters%204-8.pdf

Mar 26, 2017 | 2013 Piaggio Fly 150

1 Answer

Seat lock wont open


Without pushing the ignition key in when turning it left from off position, lift the back of the seat while turning the key left. I have found the seat release spring under the seat gets weak, so you have to lift it manually. If you push the key in while turning it, it may bypass the seat release and lock the steering. Hope that helps.

May 05, 2014 | 2007 Derbi Atlantis Bullet 2t

1 Answer

2008 Piaggio XEvo 250 quits running


Hi, Danny and the usual suspects are:
1. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
2. Failed alternator/generator and or voltage regulator.
3. Loose or corroded battery terminals and or cables especially the "NEGATIVE" cable, look for loose, corroded, or broken connectors inside the cable harness at "BOTH" ends.
4. Failed main circuit breaker or ignition switch, check for loose connections and continuity.
5. Failed system and or ignition relay, check for continuity.
6. Failed ignition coil, stator, magneto, ignition/electronic module.
7. Failed CKP, CPS, CMP, MAP, TPS, or BAS sensor, corroded, loose or broken wire connector pins/sockets.
8. Throttle cables and or idle speed improperly adjusted hot idle speed should be 950 RPM to 1000 RPM.
9. Faulty neutral, side stand or clutch lever safety switch.
10. Air/fuel mixture screw improperly adjusted.
11. Accelerator pump damaged or not working.
12. Water or dirt in the fuel system, carburetor or filter.
13. Restricted, blocked or kinked fuel line.
14. Fuel tank empty.
15. The gas cap is not venting properly or fuel tank venting system blocked.
16. A failed fuel pump, pressure regulator and or fuel injectors.
17. Vacuum line from intake manifold to petcock broken, cracked, or not attached, carburetor vent line plugged.
18. Needle and seat stuck closed in the float bowl.
19. Lean angle switch is faulty or needs adjustment.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://groups.google.com/forum/#!topic/alt.scooter/jwRUQITS9lA
found this helpful answer from motorcycle mechanic on JustAnswer com
PIAGGIO X7 250ie Service Station Manual
Genuine Piaggio scooter parts spares Fowlers Parts
PIAGGIO xevo 250IE User Manual

Oct 02, 2017 | 2008 Piaggio XEvo 250

1 Answer

Handlebars are bent


Instructions

YZF600R (1994 - 2007)
1

Insert the ignition key into the seat lock, located on the left side of the tail fairing above the left passenger foot peg. Twist the key clockwise to release the seat lock mechanism.
2

Grasp the rear portion of the seat and lift it off of the motorcycle's subframe. Pull the front of the seat away from the gas tank until the tab under the front of the seat is free of the subframe.

3

Hold the seat over the subframe to reinstall it. Hook the seat's tab under the cross-member below the base of the gas tank.
4

Push the seat forward slightly, then lower the rear of the seat onto the motorcycle's subframe.
5

Push down on the rear of the seat until the seat lock mechanism clicks into place. Remove the ignition key from the seat lock.
YZF-R6 (1998 - Present)
6

Insert the ignition key into the seat lock on the left side of the tail fairing. 2006 and newer R6 models place the seat lock under the tail fairing, near the left rear foot peg. Twist the key clockwise to release the seat lock mechanism.
7

Grasp the rear of the passenger seat and lift it up slightly. Pull the seat toward the rear of the motorcycle until the hooks under the front of the seat are free of the tabs built into the subframe under the tail fairing.
8

Pull the rear corners of the rider's seat up to reveal both mounting bolts. Unscrew the bolts with a 5 mm Allen wrench. Lift the rear of the seat up, then pull it away from the gas tank until the tabs under the front of the seat are free of the cross-member below the base of the gas tank.
9

Slide the rider's seat tabs under the frame cross-member to reinstall the seat. Lower the back of the seat onto the subframe, then screw the mounting bolts into place with a 5 mm Allen wrench.
10

Hook the front of the passenger seat onto the tabs built into the subframe under the tail fairing. Lower the seat onto the fairing and press down until the seat lock mechanism clicks into place. Remove the ignition key from the seat lock.

Jan 15, 2013 | Yamaha XT 125 X Motorcycles

1 Answer

How to open seat on sachs scooter


Tryi this it may help
  • 1

    Make sure the vehicle is balanced on the centerstand. The centerstand is a metal bracket located in the middle on the bottom of the scooter. Engaging it means that the scooter is resting on the front tire and centerstand. The rear tire is raised slightly off the ground.

  • 2

    Insert your ignition key into the main ignition switch. The switch is located on the inside front of the scooter just to the right of center and below the handlebars.


  • 3

    Twist the key to the left, or counterclockwise, to the position on the switch marked Open. If the scooter is not in the locked position, turn the key to the first Open position. If the scooter is in the locked position, turn the key to the second Open position. In either case, turn the key counterclockwise one notch to the respective Open position. The Yamaha Vino Scooter Owner's Manual cautions you that you should not push down on the key while turning to the Open position.

  • 4

    Grasp the end of the seat nearest the front wheel and pull it upward to raise it on the hinges located at the rear. Now you can store or retrieve items from the storage compartment

  • Nov 27, 2012 | Sachs Motorcycles

    1 Answer

    My brakes won't "lock" when stopping and I


    u need a repair manual for ur model--search online or fixya--

    Oct 30, 2011 | 2008 Piaggio X7 250

    1 Answer

    2005 Honda Activa seat is jammed


    Hi, Anonymous for more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
    Under seat storage compartment won open SCOOTER PROFESSOR
    Seat lock not opening problem solved Honda Activa 3g
    http://www.family-motorsports.net/GY6-50cc-150cc.pdf
    http://www.partsfish.com/page/oem-parts-for-honda
    Honda activa 2009 Owner Manual

    Mar 14, 2011 | 2005 Honda Activa

    2 Answers

    How do i open seat trunk ? I know there is a cath with lever undernath but I cant seem to figure it out.


    On LH there should be a key hole where you can stick your ignition key to release the seat lock. Good?

    Apr 15, 2010 | 1997 Suzuki GSX-R 750 V

    Not finding what you are looking for?
    2010 Piaggio X7 Evo 300ie Logo

    Related Topics:

    79 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Piaggio Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4818 Answers

    Joseph Hoffmann

    Level 3 Expert

    1746 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Are you a Piaggio Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...