Question about 2005 Yamaha TW 200

1 Answer

Start good, Put in gear leave clutch out shuts off. kit stand up

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,565 Answers

Sounds like the kick stand switch is stuck. try shooting some carb cleaner in it to remove gunk. You can verity by checking the switch's continuity with a VOM or just jumping with a paper clip.

Posted on May 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2006 honda shadow aero. engine dies when put in gear. kickstand switch measuers good at plug...clutch switch measures good...clutch disengages properly...what else can it be?


Hi, Dan the ignition circuit cut-off system comprising of the side stand switch, clutch switch and neutral switch has the following functions:
a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not pulled.
b. It prevents starting when the transmission is in gear and the clutch lever is pulled, but the side stand is still down.
c. It cuts the running engine when the transmission is in gear and the side stand is moved down.
Periodically check the operation of the ignition circuit cut-off system according to the following tests.
With the engine turned off:
1. Move the side stand down.
2. Make sure that the engine stop switch is set to "RUN"
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch if the engine does not start the neutral switch may be faulty.
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down if the engine does not stall you may have a faulty side stand switch.
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Push the start switch if the engine does not start you may have a faulty clutch switch.
This check is most reliable if performed with a warmed-up engine.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Dies when put it in gear 2003 Honda Spirit VT 750
Bike only starts in neutral and Dies when put in gear
Honda VT750C2 Shadow Spirit Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda VT750C 2005 Shadow Aero Owner Manual

Apr 29, 2017 | 2006 Honda Shadow Aero

1 Answer

Yamaha Radian stalling


Hi, Anonymous the ignition circuit cut-off system comprising of the side stand switch, clutch switch and neutral switch has the following functions:
a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not pulled.
b. It prevents starting when the transmission is in gear and the clutch lever is pulled, but the side stand is still down.
c. It cuts the running engine when the transmission is in gear and the side stand is moved down.
Periodically check the operation of the ignition circuit cut-off system according to the following tests.
With the engine turned off:
1. Move the side stand down.
2. Make sure that the engine stop switch is set to "RUN"
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch if the engine does not start the neutral switch may be faulty.
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down if the engine does not stall you may have a faulty side stand switch.
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Push the start switch if the engine does not start you may have a faulty clutch switch.
This check is most reliable if performed with a warmed-up engine.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Re dies when put in gear Road Star Forum Yamaha Road Star
Bike dies when put it in gear plz help
Yamaha YX600 Service Manual
OEM parts for Yamaha
http://www.badrad600.com/Radian%20Manuals%20-%20Complete%20-%20Printable/Radian%20Owner's%20Manual%20Clean%20Complete%20Final.pdf

Mar 25, 2012 | 1987 Yamaha YX 600 Radian

1 Answer

Recently went for a ride and everything was good. Made a stop, when I came out bike wouldnt start. turning the key everything was normal, rpm gauge spiked, lights turned on, fuel pump was heard. Went to...


Did you leave your motorcycle in gear when you turned it off? It sounds like the side stand safety switch is keeping the bike turned off. If my Suzuki is running and I pull in the clutch, with out raising the side stand, and I place the bike in gear with the side stand down, it will immediately shut off. The cycle is set up that way so you will not drive with your stand down and go out of control when you take your first left turn. If your cycle is not in neutral and your side stand is down, that would cause the condition you describe. If that is not the case start by inspecting the side stand safety switch and the clutch safety switch for proper operation.

Jun 24, 2011 | Suzuki GSX-R 750 F Motorcycles

1 Answer

My bike is warmed up, running perfectly, I pull the clutch in and the second I click it into gear the bike shuts off. I put it into neutral and start it again and once again it shuts off when I put it...


Is you're side stand completely upright, it sounds as if your safety switch is sticking on your stand wd40, both stand and switch, wipe any residue wd40 of any rubber asit rots it

Feb 12, 2011 | 2005 Suzuki Boulevard C90

2 Answers

I have a 2004 yamaha YZF-R1,when I start my bike in neutral and go to put it in first gear my bike dies.After I start the bike I pull in the clutch and downshift Into first gear from neutral and it just...


Hello,
I dont think that you are doing anything wrong. Your bike has a side stand safety switch. the switch is designed to cut the engine if you put it in gear while the side stand is down or it thinks that the side stand is down. There is also a clutch lever switch that allow you to start the bike in gear while the clutch is pulled in. I would check the side stand switch first and make sure that the side stand is lifting all the way when you flip it up. If the stand is bent or dry, corroded it may not be activating the switch properly.
Next you should check the clutch lever switch. Make sure that the connector is plugged in properly. Also look underneath the lever and you can check the plunger for the switch to make sure it is moving freely.

If you have recently added different levers or a sidestand this can be the problem. somne of the aftermarket parts have to be worked on in order to get the switches acting properly.

Thanks and I hope that this helps.
Steve

Feb 03, 2011 | Yamaha YZF-R1 Motorcycles

1 Answer

I have a 2005 Yamaha 650cc v-star bike custom. My bikenturns on fine and engine sounds good. Drove my bike for 10 minuets then when I turned it back on and shift to first gear the bike shuts off. I...


Is your side stand down when you shift it into gear? If you have a side stand safety switch your motor cycle is designed to shut down if you put it in gear with out raising the side stand. It is set up that way so you wont be able to drive down the road with your side stand down , take a left turn, and crash your bike.

Jan 15, 2011 | 2007 Yamaha V Star Custom

1 Answer

'06 vtx 1300 c : engine dies when put into gear


You have one of two things going on. (1) You need to check the kick stand switch, your bike thinks the kick stand is still down. It may have been loosened out of adjustment by vibration. If the kick stand switch is out of whack, it will restart as long as the clutch in pulled in. But as soon as you try to let out the clutch it will kill the engine, if it is in gear. (2) Next problem could be, you need to loosen up the clutch cable a little bit, The clutch control on the handle bar has a screw type of adjuster (clutch cable passes through it ), try loosening it till it's easy for you to move the bike without the engine shutting off. Hope it helps and comment if you need more clarification.

May 08, 2010 | 2006 Honda VTX 1300 S

1 Answer

1982 yamaha xj650 starting


Check the electrical switch in the clutch lever, most bikes have one as a safety, so you cant start it in gear, unless the clutch is in, could be a faulty switch, also do you have a switch on your side stand, sometimes these can be faulty as well.

Apr 17, 2010 | 1982 Yamaha XJ 650

1 Answer

I start my bike and the engine runs but when i put itinti gear the engine dies. why is this?


I'm not familiar with this particular model but let's see what we can do.

If the bike lurches forward when you put it into gear, you clutch is either not releasing for some reason or the clutch plates are stuck. In the case of the stuck clutch, you'll need to disassemble and free up the clutch pack.

Since I can't find much on your particular model, it appears to have lights on it. If this is the case, it may have a kickstand position switch. If the kickstand is down and you put it into gear, the engine is shut off. This is a safety feature on some bikes. Try raising the kick stand prior to putting the bike into gear.

Good Luck!!

Nov 04, 2009 | 2002 kawasaki KMX 125

1 Answer

Bike shuts off when in gear


hello and welcome
it seems that you may have a faulty side stand switch. the side stand needs to be in the up position before the bike can be started off in gear. but if not the side stand contains a saftety switch that shuts the bike off when put into gear. to verify this you can check for spark when the bike is being turned over in gear with the clutch held in.
there should be two wires associated with this switch. a green, and green with white. so when the stand is up these two wires are connected, and the switch can be tested as such. thank you.

Mar 21, 2009 | 1994 Honda VT 600 C Shadow

Not finding what you are looking for?
2005 Yamaha TW 200 Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...