Question about Honda CR 125 R Motorcycles

1 Answer

I have 2006 Honda cr125r that has developed a neutral between 3rd and 4th gears. What is the most likely cause of this?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 3,567 Answers

There are a few possible causes. A slightly bent shift fork, the index wheel on the shifter not operating properly, and rider error are the usual causes. I doubt you are failing to lift the shift lever fully, so we can rule that one out. Since the other gears are indexing properly, I doubt the index wheel is bad. That leaves a slightly bent shift fork. If the shift lever is getting physically harder to move up and down when changing from a certain set of gears, i.e. 3rd to 4th or 4th to 3rd, it would tend to indicate a bad fork. This is an expensive repair and is not recommended for the novice mechanic.

Posted on May 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is causing a couple of second judder when accelerating away after changing from 2nd to 3rd and 3rd to 4th gear ?


it may be from failing engine mounts allowing the engine to misalign the drive shaft under acceleration and allowing problems in the cv joints or "U" joint

May 12, 2016 | Ford Cars & Trucks

1 Answer

I have a 2006 honda shadow vt600 it will shift into 1st and 2nd gear but not 3rd and 4th


sounds like the teeth have sheered off the cog wheels in the gear box have the gear box checked out

May 04, 2014 | Cars & Trucks

1 Answer

Gear selecting issue on Hyundai Coupe with 3rd gear


have you checked the transmission fluid...does it smell ``heated``,
is the fluid red or dirty?

Mar 31, 2014 | 2006 Hyundai Coupe 2.0

1 Answer

Car moves with shifter in neutral position,feels like in 3rd or 4th gear.with shifter in 1st or 2nd gear car will not move. engine dies when clutch is engaged.


car is in two gears disengauge linkage and put back in Mistral if is a too loader you may have to pull the shift assembly and manually shift thhe gears your shift forks may be bent

Mar 11, 2013 | 1991 Honda Accord

1 Answer

2001 chevy s10 automatic 150,000 miles suddenly lost 3rd and 4th gears


USE A SCANNER TO CONFIRM WHETHER HAS ANY SOLENOIDS HAD TO DO WITH.

Aug 29, 2012 | 2001 Chevrolet S-10

1 Answer

I have lost all but 3rd and 4th gear and when moving shifter around in neutral it makes a metal on metal grinding noise, and while in gear i am able to move the shifter around like a joystick. also no...


You will need to have the transaxle
removed and repaired

Figure $1500.00 min for trans

May as well do clutch while your in there

$2,500.00 Total

Mar 11, 2011 | 1998 Honda Prelude

1 Answer

2006 R6 Shifting Problem


Howdy: The 3rd and 4th gears are used the most, after awhile the dog and shifting forks get worn more. Try changing to Yamaha Lube simi-syn oil 10/40. Drain oil after warm up (get trans oil warm). The oil is in a silver 4gal containe at the Yamaha dealer. This oil has helped me.
Good luck - Doug

Dec 09, 2009 | 2006 Yamaha YZF-R6

1 Answer

What different gear box can fit honda integra xsi vtec 1600cc b16a? i want to change my gear box ,and i want to know what exactly other gear box can fit my car?thanks its a integra bot the product can show...


J1/S1 Found in: Integra XSI/RSI (DA6) Type: Cable 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400 Y1 Found in: CRX/Civic (optional LSD) Type: Cable 1st: 3.166 2nd: 2.052 3rd: 1.416 4th: 1.103 5th: 0.870 R: 3.000 FD: 4.266 YS1 Found in: Integra 92-93 XSI/RSI (DA6, DA9) Type: Cable 1st: 3.307 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.880 R: 3.000 FD: 4.400 S80 Found in: Integra Type R 98+ (LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.785 S80/Y80 Found in: JDM SiR-G (optional LSD) Type: Hydraulic 1st: 3.230 2nd: 1.900 3rd: 1.360 4th: 1.034 5th: 0.787 R: 3.000 FD: 4.400 Y21/Y80/S80/S4C Found in: JDM 96-97 Integra R(LSD) JDM Civic R [EK9](LSD) JDM Civic SiR [EK4, EG6] JDM CR-X DEL SOL SIR (EG2)(optional LSD) USDM DEL SOL VTEC (EG2)(OPTIONAL LSD) Type: Hydraulic 1st: 3.230 2nd: 2.105 3rd: 1.458 4th: 1.107 5th: 0.848 R: 3.000 FD: 4.400

Jun 08, 2009 | 1990 Honda CRX

2 Answers

False neutral


There is pretty much a false neutral between every gear on an Enfield. You need to ease the gear up or down and do it by feel more than a hard up or down movement

Nov 10, 2008 | 2007 Enfield Bullet Electra

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

292 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...