Question about 2000 Suzuki VL 125 Intruder LC

1 Answer

My bike starts no problem drives great but when i stop the bike and turn it of it wont start ihave to jump it in gear and of she goesits a 00 125 intruder lc its been sitting up for 4years veeery clean bike

Posted by on

  • derekdoogue May 28, 2011

    thanks yorksbiker iwas driveing the bike after and it cut out on me and it does start when stand is down.iwill look at the stand.iam new too the 125 intruder.iwas checking out the air filters on the bike 1has the foam on the left and the right 1 hasnt,is this correct for the bike idont know as ididnt get a manual with the bike

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sounds like the cut out switch on the kick stand. The bike shouldn't start if you have the kick stand down. Check the kick stand is fully retracted and that the switch is disengaging OK. Maybe the stand is slightly loose & its making contact even when retracted. Otherwise check the kill switch. Both parts are available cheaply on ebay & easy to replace.

Posted on May 27, 2011

Testimonial: "thanks it was part of the problem bike running no prob now no cut outs"

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jerking when put in gear


Clutch is Not releasing! needs to be adjusted properly

Mar 12, 2014 | Yamaha Motorcycles

1 Answer

SMOKE COMING FROM DASH, LOUD POP. CAR WONT START. IT TURNS OVER BUT WONTS START 92 DIAMANTE


if its smoking thats a shorted system..if you feel safe with fixing it do so otherwise get rid of that deathtrap..

Dec 25, 2013 | 1992 Mitsubishi Diamante

1 Answer

My 2006 r6 starter relay clicks like a dead battery and my bike wont start and my starter just spins my motor wont turn


Hi, Anonymous the starter drive/Bendix/clutch is a mechanical gear driven component that engages the clutch pack ring gear to turn over the engine. It has an internal mechanism that allows the gear to turn in one direction and once the engine starts allows the drive gear to free spin. If gear free spins in both directions then the drive gear has failed, it is not serviceable and needs to be replaced. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
http://www.r1-forum.com/forums
Won start just clicks but can push start Jumping relay doesn start it
2008 2009 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Sep 01, 2013 | Yamaha YZF-R6 Motorcycles

1 Answer

2004 suzuki gs500f starter will turn over with the start button and jumping it, and all the gears will turn but the bike itself will not turn over. any ideas?


Hi Jeremy, for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. Good luck and have a nice day.

Dec 27, 2011 | Suzuki Sweet 125cc Motorcycles

1 Answer

Bike turns over all lights on except the neutral light when i try and start it it wont start all fuses work battery good


You dont say what bike this is, most modern bikes wont start if the neutrol light does not work, this is safety feture to stop you starting the bike in gear, does the bike turn over ok or not? Does the bike have the gearing selection reversed as with rear sets in track mode as the gears are reversed, and neutrol would be 1 down from the top

May 05, 2011 | Yamaha NC 110 Motorcycles

1 Answer

Bike wont start up unless i put the side stand up


The bike could be fitted with a side stand cut off switch. this is to stop the rider driving off with the side stand down. also if the bike is in gear the bike should not start, this is linked to the clutch/gears. AGAIN IT STOPS THE RIDER FIRING UP THE BIKE AND THE NEXT thing he is aware of is his bike either taking off with out him or hitting a wall or car etc.
hope this helps
og

Jan 28, 2011 | 2000 Suzuki GZ 125 Marauder

1 Answer

TRANSMISSION PULLS VERY VERY SLOW IN DRIVE AND ONLY WHEN I ACCELERATE HEAVILY. REVERSE WORKS FINE.


is this car still under warranty? if so take it back to the dealer and don't accept it as repaired till you drive it. sounds like the logic that controls the transmission is flipping out, sometimes they will tell you that it needs a reflash. what this amounts to is that the manufacturer put some not so great programming in the logic when they built the car but now they have a patch or fix that makes it work better but you have to pay them for their time to install the fix. ask them what they will charge you for the privilege and decide if it's worth it to you. there is a recorded technical service bulletin about harsh shifts for your car. well, actually there are two, the latest one a revision of the first. i would try to make this their problem, it really is. hope this helps.

May 28, 2009 | 2006 Suzuki Forenza

1 Answer

Noise in trans or in primary chain


It sounds like the primary drive chain is loose. The way I adjust mine is to take off the upper left inspection cover, start the bike and slowly tighten the adjuster until it starts to wine, then back off until it stops. Rev it slowly and listen for a wine. No wine good to go.

May 07, 2009 | 2002 Harley Davidson XL Sportster 883

1 Answer

I just bought a used '03 650 vstar. I started it up and took it for a test drive and pulled it into my garage. My room mate was out there for quite some time checking out the bike. No idea what he did, but...


Colud your room mate have accidentally put the bike in gear? There is a switch on the kickstand that will killl the engine if kickstand is down and bike is in gear.

Apr 06, 2009 | 2003 Yamaha V Star Classic

Not finding what you are looking for?
2000 Suzuki VL 125 Intruder LC Logo

440 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...