Question about 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

Hazard lights work but blinkers do not- just bought new turn signal module

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

E-mail me directly and I'll send you a trouble shooting chart. It's for an earlier model but you can still figure out the problem with your unit. wd4ity@bellsouth.net Please remind me of what you need.

Steve

Posted on May 27, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the blinker relay in my 2011 Chevy Equinox.


PCB Relays
This vehicle is equipped with the following printed circuit board PCB mounted relays.
• High beam
• Low beam
• DRL
• Fog lamp
• Park lamp
• Stop lamp
• Horn relay
They are directly soldered to the underhood fuseblock circuit board. A failure of one of these relays will require the whole under hood fuse block to be replaced.

Turn Signal/Hazard Lamps
The body control module (BCM) is responsible for controlling the turn signals and hazard lamps. When the turn signal switch is placed in either the left turn or right turn position, the BCM receives a signal from the turn signal switch. The BCM then sends an on-off voltage signal to either the left or right turn signals and their instrument panel cluster (IPC) indicator. When the hazard switch is pressed, the BCM receives a signal from the hazard switch. The BCM then will send an on-off voltage signal to all the turn signal lamps. All the turn signal lamps will flash including both IPC turn signal indicators.

Vehicles are just not the same as they use to be. Electronics !!!!!

Sep 25, 2015 | 2011 Chevrolet Equinox

2 Answers

Right side turn signal switch does not work/blink?


hi

there is usually a turn signal relay under the dash that clicks when you turn left and right you may need to replace it they wear out over time
25718368-m35oz4jvdfvvmght4a51n0jl-2-0.jpg cheers

May 28, 2015 | 1992 Isuzu Rodeo

1 Answer

Short in electrical system?


when the radio is OFF sound comes out of the rear speakers when the blinkers are used ! There isn't a turn signal flasher on your vehicle ,( like most all newer vehicles ) It's done electroniclly by a control module . In the case of your vehicle , the BCM - body control module . It doesn't matter if the radio is off . All the Audible warnings come out of the radio speakers . Headlamps left on , key in ignition etc... You have no idea of the complexity of your vehicle , it's a rolling computer , with a serial data network for the modules to talk to each other , share info.
When the turn signal switch is placed in either the left or right position, a ground signal is completed from the turn signal switch to the BCM. When the hazard flasher switch is activated, a ground signal is completed from the turn signal/hazard switch to the BCM. The BCM then sends an ON-OFF voltage signal through the fuses to the appropriate turn signal and side repeater (export only) lamps or to all of the turn signal fuses for hazard operation.
Really don't think you have electrical short . Computer glitch maybe , radio problem . How ever , these system's are not for the untrained to mess with . Your best bet , the GMC dealer !

Aug 07, 2017 | 2010 GMC Yukon XL

1 Answer

2001 4 Runner blinker problem


The hazards use a separate relay. listen for signal relay clicking to locate the correct relay. Consult your owners manual for fuse and relay layout.

May 26, 2017 | Toyota 4Runner Cars & Trucks

1 Answer

Turn signal hazard lights work but not running lights


The parking lights should be on a different circuit from turn signals - hazard lights. The bulbs usually have two filaments, one for each circuit.
On most models there is a tail light fuse and relay that handles front and rear parking lights.

Jun 28, 2013 | Toyota Tacoma Cars & Trucks

1 Answer

No break lights, blinkers or hazzards. I changed the fuses. That wasn't it. Still No breaks, blinkers or hazards. Where is the relay?


I would check the turn signal/ hazard flasher module, its on the brake pedal bracket, 5 wires, turn the hazards on and give the side of it a few raps with a screwdriver and see if it starts flashing. The PINK should have 12v. If that checks out good it may need the turn signal switch. At the turn signal switch there is a WHITE wire that should have 12v when the brake is depressed, then you should have 12 on the DARK GREEN and the YELLOW wires coming out. If the center high mounted light works, then the brake switch at the pedal is good.

Nov 19, 2010 | 2002 Pontiac Sunfire

1 Answer

Signal lights will work sometimes, but not others. Emergency flashers still work all the time.


The signal lights and hazard flashers work off of separate plug in modules generally easy to get to under the dash behind the steering wheel area. With the blinkers on you can touch the module and feel the clicking inside. Look for a black or blue square boxy looking thing with three or two terminals coming out of it, about the size of a golf ball. One will be for hazards and one for blinkers. Ask at the parts store for the turn signal blinker module and then replace either one first to test to see if it corrects the problem and if it doesn't, put the old module back in place and replace the other with the new one (if they appear identical - interchangeable).

Sep 16, 2010 | 2002 Oldsmobile Alero

2 Answers

Turn signal doesn't come on until I hit my hazard light on & off


it could be duel filament bulb that is blown and shorting inside the bulb to the other circuit, you may need to remove all indicator and hazard bulbs and check. I would also try a new flasher can

Apr 17, 2010 | 2003 Chevrolet Impala

Not finding what you are looking for?
2000 Harley Davidson FXDWG Dyna Wide Glide Logo

146 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...