Question about 2004 Husqvarna TE 250

Open Question

Is a kick start kit available for a 2004 Husqvarna 250 te? I'm looking at purchasing that particuliar bike, currently only has electric start.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 8 Answers

SOURCE: kick starter on 2005 husqvarna te 450 seems like

MY GUESS IS
1.THE STARTER GEAR TEETH MAY BE STRIPED.ON A BIKE THIS SIZE IT WOULD BE MY FIRST GUESS.

2.LAST TIME YOU RODE IT DID THE CLUTCH PULL GOOD NO SLIPPING?

3. BROKEN KICK STARTER RACHET GEAR SPRING.THIS IS NOT THE KICK STARTER RETURN SPRING NOW IT IS A LITTLE DIFFERANT.

HOPE THIS HELPS
ELLIOT NEACE

Posted on Feb 26, 2009

Ad
sisadsl
  • 1508 Answers

SOURCE: Need a 1972 Honda XL 250 that needs a kick starter Shaft

you will have to find the same model, there were no xr back then

Posted on Apr 05, 2010

  • 189 Answers

SOURCE: Some guy has asked me to trade my 1999 kawasaki kx

Have you tried the husky yet? Yes -, it's a good deal. One hill climb should be enough! Make sure to tape the launch for posterity... P.S.- Huskys like to play in CO., WY., and any other tall places- ED

Posted on Apr 24, 2010

SOURCE: what oil should i be putting in my husqvarna te

Hi,
Best is REPSOL 4T 10W40
Alex

Posted on Feb 02, 2011

  • 3567 Answers

SOURCE: Describe your how to kick

Ease the kick start lever just past TDC (top dead center) compression. This puts the piston on the downward power stroke. Twist the throttle one time. Now kick it over. Don't twist the gas with every subsequent kick. A power valve squirts gas with each twist and can flood the engine really quick. A fresh spark plug, clean air filter and good battery will also help. Drain the carb to be sure no water has gotten into it.

Posted on Feb 03, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Describe your how to kick start a husqvarna TE 250 2010


Ease the kick start lever just past TDC (top dead center) compression. This puts the piston on the downward power stroke. Twist the throttle one time. Now kick it over. Don't twist the gas with every subsequent kick. A power valve squirts gas with each twist and can flood the engine really quick. A fresh spark plug, clean air filter and good battery will also help. Drain the carb to be sure no water has gotten into it.

Feb 03, 2011 | Husqvarna TE 250 Motorcycles

1 Answer

How difficult is a low engine rebuild? I ran the bike low on oil and the engine seized, but I was able to free it and start it, but it runs poorly.


Its easy to rebuild and engine so long as you replace gaskets and use some gasket sealant and use correct torque on each bolt which can be found on owners manual for bike

Jun 17, 2010 | 2004 Husqvarna TE 250

1 Answer

Huskt tc250 broken inner an outter case round kick start


Obviously, new casings would be the best option, but another option you have is to take the parts to a commercial welding shop and have them Heiliarc weld the casings. Alternate to that, you could try Googling motorcycle salvage Husqvarna to see if you can get some used parts. The bad thing about a busted inner casing is that you should change out the inner casings as a matched set. Sometimes the casings don't line up perfectly if only replacing one side and the result is shafts that freeze up when you tighten down the screws. Please rate my answer. Thanks.

Feb 11, 2010 | 2004 Husqvarna TE 250

2 Answers

Husqvarna WXE250 Seized Motor


What does the TE stand for? Won't turn at all? Pull the spark plug and try. Try backing up the motor in oposit rotation. If it frees, ck the spark plug tip to make sure its there then spay wd40 into plug hole liberally, kick over half dozen times. ck plug gap and reinstall then try kicking it over again.. Mske sure you are getting fuel to the carb.and plenty of air.

Jul 01, 2009 | 2002 Husqvarna TE 250

1 Answer

Kick back and starting problens


Take it to a shop and get it tuned - remotely diagnosing problems with a modded bike is impossible.

Jun 27, 2009 | 2003 Husqvarna WR 250

1 Answer

2004 husky te250 tight intake valve


check the spark plug. It may be wet and when it is, check the impulser. maybe its deliberating the current slow.

Apr 15, 2009 | 2004 Husqvarna TE 250

1 Answer

Kick starter on 2005 husqvarna te 450 seems like it is stripped or something doesnt grab at all while kicking it down please help sahneg


MY GUESS IS
1.THE STARTER GEAR TEETH MAY BE STRIPED.ON A BIKE THIS SIZE IT WOULD BE MY FIRST GUESS.

2.LAST TIME YOU RODE IT DID THE CLUTCH PULL GOOD NO SLIPPING?

3. BROKEN KICK STARTER RACHET GEAR SPRING.THIS IS NOT THE KICK STARTER RETURN SPRING NOW IT IS A LITTLE DIFFERANT.

HOPE THIS HELPS
ELLIOT NEACE

Feb 26, 2009 | 2005 Husqvarna TE 450

Not finding what you are looking for?
2004 Husqvarna TE 250 Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4533 Answers

choprboz5

Level 2 Expert

196 Answers

Joseph Hoffmann

Level 3 Expert

1702 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...