Question about Honda CBR 600 RR Motorcycles

1 Answer

I have a 2005 cbr600rr the tachometer goes crazy the headlights have no power and the fi light is flashing what in the world do these system have in common

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Honda Master
  • 5,370 Answers

Fi light blinks and gives code.You have to count how many times this light per that error code is checked. It can be loose sensor fault. Check the throttle position sensor. The blue one right by the frame on the left hand side, is the throttle position sensor. The MAP Sensor is the Small black mounted on the right side of the Throttle body.------- loose or poor contact on IAT sensor.Open or short circuit on IAT sensor wire.faulty IAT sensor.The iat sensor located in on top of the airbox.Remove and refit that sensor.-------- Click the link below to get error code list:--- ------------ For tachometer going crazy problem:--

Idle may be too low. keep it between 1.4 to 1.7.
Adjust the black knob on the left side of the bike near the stator until it moves up a bit.


Just turn the black knob by the stator cover. it only takes a little bit to make a difference. Turn it maybe 1/8 - 1/4 turn one way, then wait a few seconds for it to kick in. If it gets worse, turn it the other way. You can actually turn it tight enough so that the motor will stop.After you get it turned a little in the correct direction, the tach will be smooth..

And don't turn it too much because you can actually unscrew it and it will become disconnected. Remember, just 1/8-1/4 turn at a time.------

and for headlight problem check the head light switch and bulbs.the switch is getting short or the wire is loose.-------------

This should help.thanks.Helpmech.

Posted on May 24, 2011

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Tachometer goes crazy and engine lugs when I turn on the lights

is car engine running at 800 rpm or more,
the battery is dead, or its ONLY discharged,12.6v is charged.
there are many fail points
battery weak,, or alternator dead.
power feeds to fuse boxes rusty
lots. and we dont worry or guess, we use a voltmeter,
and find cause in 5min, (ask any shop to do this its childs play for ase with full car electrics under belt)

the engine running, got 13.3 to 15vdc running ?
if not the CHARGE systems are failiing
note i never said any part is bad.

if you want wild guessing, you will see that here,
but not,me
we test, and never guess. ever.
"laws of physics rule" me.

get it serviced, ever hear that?

Jan 19, 2015 | 1995 Toyota Camry

1 Answer

Faulty EPROM in ECM

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
FI light flashing
2005 2006 Honda CBR600RR Service Manual Moto Data Project
Honda CB Owners Manuals

Apr 05, 2014 | 2006 Honda CBR 600 RR

1 Answer

2005 Honda CBR 600 RR oil light comes on

Hi, Billee and the usual suspects are:
1. Insufficient oil level or no oil in engine or tank.
2. Air in oil system that needs to be bled.
3. Blockage in the oil tank or line.
4. Oil pump failure.
5. Faulty oil pressure sending unit.
6. Grounded oil pressure light circuit.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Oil light comes on SOLVED
oil light is on but have plenty oil
2005 2006 Honda CBR600RR Service Manual Moto Data Project
Honda CB Owners Manuals

Nov 11, 2013 | 2005 Honda CBR 600 RR

1 Answer

Lights blinks on and goes off and sometimes goes off completely on the 2005 touring

are u talking about ur headlights?? My headlights go on and off at night i cant even drive my car when it gets dark people think im flashing my lights at them

Mar 01, 2013 | 2005 Chrysler 300 Touring

1 Answer

Took my battery out of my dogge ram 1500 year 2005 charged it put it back in now nothing works

My first guess is the anti-theft system, but the headlights and other accessories would have to work.
If nothing works, you'll have to trace the main circuits from the battery to the fuse boxes to find it. And the ground connections.

Jul 10, 2012 | 2005 Dodge Ram 1500

1 Answer

Lights are going crazy like bad ground or computer on my 1985 vette

If you are are talking about the dashboard lights, there is a known problem that causes them to go "crazy" as you call it. There is a part known as the tachometer filter. This is a capacitor that filters the noise coming mainly from the ignition and that causes the dashboard display to go "crazy". If that is your problem, go to Ecklers store on web and search for the tachometer filter. It comes with instructions. This part goes next and connects to your distributor.

Dec 10, 2011 | 1985 Chevrolet Corvette

1 Answer

My CBR600RR 04 on idle is not running right and the FI light is flashing constantly, can you help me solve this problem please.

FI stands for Fuel Injection. The fuel system sensors have detected a problem. It could be anything > a dirty air filter restricting airflow, a plugged injector, an error in fuel mapping, any number of things. You will need to take the bike to a Honda dealer to have them plug in a code reader. The code reader will tell you exactly what the problem is. Please rate my answer. Thanks.

Aug 18, 2010 | 2003 Honda CBR 600 F(4)i

1 Answer

2002 mercury cougar- electrical problem when i hit the breaks

Sounds like a wiring short somewhere. With the car not running, how do the brake lights look when you press the pedal? Check if things are different with headlights on or off... don't guess. Could be a bad ground connection also. Also, make sure your battery is charged and the alternator is working.

Apr 08, 2017 | 2002 Mercury Cougar

1 Answer

2005 Mustang all of my Gauge readings are going crazy. Says I am going 70 when I am going 30 the tachometer goes way below 0 in the wrong direction. And the temp gauge reading is always on c.

On the 05 Mustang instrument clusters this is a common problem, it's caused by failing stepper motors on the cluster's circuit board. It can be fixed though, check out this page for more on how to get it repaired - 05 mustang instrument cluster repair

Jan 10, 2010 | 2005 Ford Mustang

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

147 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers


Level 3 Expert

75797 Answers


Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides