Question about 2003 Honda CR 125 R

1 Answer

What type of oil should i use for my 2003 Cr125? Also how much does it hold? and i dont mean gas oil mixture i mean the straight oil you have to put in the motor

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

I use 80/90W pro honda gear oil in mine and there is a over flow bolt on the left side of the motor that if you pull that out just keep puttin oil in until it comes out the bolt hole than it is full.

Posted on May 23, 2011

  • deerhunter43 May 23, 2011

    Thanks alot i asked when i went to buy the oil and thats what they told me would work

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much oil and what type of oil should I use in the trimmer?


You use no oil,use regular unleaded gas only,on 4-Cycle engine use gas,2-Cycle engines use the oil- gas mixture,your's is better cause you just need gas.I use Husq's too.

Apr 13, 2016 | Husqvarna 224L 25cc 4-Cycle Straight Shaft...

1 Answer

What fuel does stihl MS 192 T take, 2 or 4 stroke?


these small engines take 2 stroke oil/gas mixture, usually a 50 : 1 ratio, a little heaver on the oil is better than too light. the oil in the gas lubes the internal parts of the engine. if straight gas is introduced into gas tank just remove & replace with 2 stroke mixture. if engine has not been operated with straight gas, no harm will be done.

Apr 26, 2014 | Garden

1 Answer

What type of fuel do i need to use for my p/w? Does it require oil/gas mixture? Thx.


Your Honda would be a four stroke engine, so your fuel would be straight gas, you will notice on the base of the engine there is a location to put oil, a 4 stroke engine is lubricated by the oil in the base of the crankcase. On a two-stroke engine.oil fuel mixture lubricates the crank so it has no provision to add oil to the engine.

Feb 19, 2011 | Karcher 2500 PSI Pressure Washer

1 Answer

How much gas to mix the oil in?


First check that your Mantis needs an oil/gas mixture, most of the newer Mantis tillers have four-stroke motors meaning they have oil in the crankcase and use straight gas. If your Mantis needs oil mixed in the gas use a 50:1 ratio. That's usually 2.6 ounces of two-cycle oil (it's sold in bottles that size) to one gallon of gas but read the oil bottle to get the proper mix ratio.

Sep 08, 2010 | Mantis 2-Cycle Tiller

1 Answer

Do not know what mixture or how to use


40:1 mixture for the fuel:oil ratio.16:1 will cause your saw to barely run(if at all) and if it does, will fog out every mosquito for 4 blocks. You can use any reputable 2-stroke oil, though stay away from outboard engine oil. Get the good stuff that says Stihl, or Husquavarnah, or something like that. Even the Homelite stuff is ok. The oil tank takes regular bar and chain oil.

May 30, 2010 | Homelite ZR10926 16 Chain Saw

1 Answer

Oil in the exhaust


The engine on this bike is a 2-cycle motor. What that means is, it must be fueled with a gas/2-cycle oil mixture. Oil in the exhaust (depending on the amount and type of oil) is not a clear indication anything is wrong with the bike.

Nov 17, 2009 | 2003 Suzuki RM 125

2 Answers

Oil and gas mixture coming out by exhaust


first off make sure the oil gas mixture is correct and mixed very well.... have the carb cleaned out very well or even rebuilt, jetted and adjusted...

Jul 06, 2009 | 2003 Yamaha YZ 125

1 Answer

How much oil do i add to change the oil on my 2003 cr125 ?


i dont know this on top of my head but ' 00 needs 600ml for change, 650 for new load

Jul 03, 2009 | 2003 Honda CR 125 R

1 Answer

Gas mixture in Leaf Blower?


The 4200 gas backpack leaf blower requires 50:1, 2 cycle oil mixed in the gasoline

Apr 17, 2009 | Garden

1 Answer

Gas/ oil mixture


If it is a riding lawn mower it is probably not a two cycle engine so there would not be a gas oil mixture. It must be a 5 horse power or higher so it would use straight gas. I hope this will help you. donnyb60

Mar 20, 2009 | Poulan Garden

Not finding what you are looking for?
2003 Honda CR 125 R Logo

Related Topics:

866 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...