Question about 1987 kawasaki ZL 1000 A1 Eliminator

Open Question

MY TAIL LIGHTS DON'T WORK BUT MY BRAKE LIGHTS DO WORK . SOMETIMES THEY WORK BUT IF YOU SWITCH THEM OFF AND THEN ON AGAIN THEY DON'T WORK

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ibrown1967
  • 450 Answers

SOURCE: I replaced the brake pedal on my 2002 Kawasaki Mean Streak, and now my brake lights don't work from the foot pedal or the hand brake

check the bulb first if stayed on gets hot and blows easy. then if staying on adjust the switch

Posted on Feb 26, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake and tailgate sometimes works


Since tail lights are not part of the brake switch, I wouldn't think so. This sounds more like a bad fuse or some other fault. Do either of the turn signals work? Are the turn signals a part of the brake lights or are they independent?

Jul 07, 2013 | 1993 Jeep Grand Cherokee

2 Answers

I have 89 bronco 2 my brake lights turn signals both work my tail lights don't work have check fuse n blubs what might be the problem


The turn signals and brake lights use the same circuit and filament in the bulbs. The tail lights are on the other circuit which comes from the headlight switch.
Do you have power on the tail light fuse ?

Feb 25, 2013 | 1987 Ford Bronco II

1 Answer

My tail lights work but my brakes lights don't


You actually have two different circuits, one for each.
The bulbs should have two filaments inside.
Depending on the make model and year, you should have a fuse and the brake switch, plus the circuit goes thru the turn signal switch.

Feb 15, 2013 | Cars & Trucks

1 Answer

Brake lights and tail lights don't work


cheek you brake light switch it's under the dash.. if it goes out it kills brake and tail

Feb 07, 2013 | 1995 GMC Sierra C1500

2 Answers

1994 dodge dakota my headlights and tail lights and brake lights don't work my abs and parking brake lights are on my dash lights don't work either I replaced the headlight switch and still no


These are all different circuits. The brake lights are on a 10amp fuse - the headlights are on a 50amp fuse - and the parking and dash lights are on a 20amp fuse.
Do you have power going into the headlight switch and the brake light switch ?

Jan 29, 2013 | Cars & Trucks

2 Answers

When I turn my lights on my tail lights work but when I hit my brakes the don't light up I have a 2001 vw beetle????


the brake lights don't light up or the taillights don't light up? the brake lights are brighter than the tailights so the tailights won't show up whenbrakes are applied. if no lights work when brakes are applied then check for a bad ground at the light assembly.

Jun 14, 2012 | 2001 Volkswagen Beetle

1 Answer

Rewired tail light with new LED's. Brake lights come on without depressing peddle or hand brake


Sounds like to me that you don't have something wired correctly. Take the wires for the brake light loose and check for voltage. You should have no voltage on this wire unless one of the brake switches has been made or you have a short circuit. I'm assuming the brake light worked correctly before installing the new tail light assembly.

Good Luck
Steve

Jul 16, 2011 | Harley Davidson FLHR-FLHRI Road king...

1 Answer

Tail lights not working. fuses look good, brake lights work, hazards work, but running lights don't- gmc sierra 2500


do the front marker/park lights work if not you could have a bad light switch on the tail light side of the switch.you need to check the brown wire at the back of the truck in the wiring harness as this is the tail light wire that feeds the bulbs.if you have power there then you will have to check for power at the socket,if no power at the socket but were you check the wire then there is a problem between the two that you will have to check out.if there is no power when checking the wire then you will have to check for lose of power between the switch and rear wiring.make sure the fuse is good by using a test light and not by looking as sometimes they look good but don`t work.

Jul 11, 2011 | GMC Sierra 2500 Cars & Trucks

1 Answer

Tail light don't work on my Honda accord Ls 1997


check the brake light switch, it is located at the brake pedal... or check/replace bulbs.... check connector, sockets in the tail light assy...

Jun 04, 2011 | 1997 Honda Accord

Not finding what you are looking for?
1987 kawasaki ZL 1000 A1 Eliminator Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...