Question about kawasaki ZX-6R Motorcycles

2 Answers

Kawasaki ZX6 1999, unable to remove forks to change seals. Have done this on many other bikes, these will not budge.

Posted by on

  • 1 more comment 
  • betrboating May 22, 2011

    These are not inverted forks, they are standard. Back to the drawing board, thanks but problem not solved.

    regards
    Tony

  • betrboating May 22, 2011

    Thanks for reply but these are not inverted forks, they are standard. Back to the drawing board, thanks but problem not solved. regards Tony

  • betrboating May 24, 2011

    Thanks, but the problem was fixed by another source.

×

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 5,370 Answers

Click the link below and follow the procedure:--- http://technoanswers.blogspot.com/2011/05/how-to-remove-standard-forks-on.html ------------ There is procedure for replacing fork seals and disassembly instructions .--------- This should help.Thanks.Helpmech.

Posted on May 22, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,319 Answers

Check out this website below for some decent instructions since they are too long to pos here

http://www.kawiforums.com/how-tos-faqs/101898-how-replace-fork-seals-inverted-forks.html

Posted on May 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i remove forks from K 75S I981 B.M.W. motor bike. everything is undone . wont budge .


With everything undone use a rubber or plastic mallet to slide the forks out

May 29, 2014 | BMW K 75 S Motorcycles

1 Answer

2004 Kawasaki KX 250 how to replace the front fork seals


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
QUICK FORK SEAL REPLACEMENT Dirt Bike Magazine
How to Change Dirt Bike Fork Seals Part 1 of 3
https://www.howtomotorcyclerepair.com/images/Kawasaki-KX-125-KX250-Service-Manual-2003-2004-2005-2006-2007-2008.pdf
OEM Parts for Kawasaki
2003 Kawasaki KX250 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Mar 19, 2012 | 2004 kawasaki KX 250

1 Answer

How to change fork seals on usd forks on kwak meanstreak and how much oil to refill


Having removed the forks, you will need to undo the lower damper bolt first, this is located on the recess inside the fork where. The spindle goes through, this will then alow you to remove the oil from the fork, and the leg will then be free from the stancion moving freely down, if the fork doesnot come apart, you will have to remove the retaining clip from the seal and pull the fork apart sliding the fork leg up the stancion and sharply pulling down on it to pull the seal out, repeat this till theseal comes out, (tip) undo the fork top nut while the forks are still fitted to the bike.

Mar 02, 2011 | 2002 kawasaki VN 1500 Vulcan Meanstreak

1 Answer

Haw change oil seal in the fork ?


hi its is a quite involved process,if you have never done them, with many ways to cause some damage to the forks, I recommend pull the forks off and take to a bike shop, but if you want to try you will need a manual as the instructions take many pages

Apr 06, 2010 | 2001 kawasaki ZX-9 R Ninja

1 Answer

Fork capacity on 1991 KX 250


SILKOLENE PRO RSF 5WT or use
SILKOLENE FORK OIL LIGHT
500-MLS OIL EACH LEG

Mar 10, 2010 | 2003 kawasaki KX 250

1 Answer

Front right fork, suspension,chain guide


chain needs adjusting or new chain needed, shouldnt be that sloppy, and change both fork seals toghther, its a false economy to change just one, if you do the other will go within a month and cost you double to have the forks removed twice. these are fast bikes and need good maintenace, you would do 180mph with a dodgy fork seals and dodgy chain.

Jul 30, 2009 | 2003 kawasaki ZX-9R

1 Answer

Front fork oil seal replacement


General intructions for most bikes:

Remove front wheel. Loosen fork tube clamps at top and bottom of triple clamps. Slide fork tubes out and remove. Access to seals is from top of tube. Remove cover and unscrew cap. Shop manual for specific bike is $24-$30. Will show detailed instructions.

Good luck;
Techjoel

May 14, 2009 | 2001 kawasaki KDX 125

1 Answer

What kind of oil do I use?


you will need one quart or one liter of synthetic high performance suspension fluid [fork oil]. go to any autozone store and they will sell u what u need.

Apr 26, 2009 | 1980 kawasaki KZ 1300 A2

1 Answer

How to replace fork seal?


Angela, do you have a Clymer, Hayne, or service manual for the bike? If not you should get one, there is a lot of valuable information in there even if you don't do all the work yourself.

Replacing the fork seal requires putting the front end in the air, disconnecting everything from the front wheel (brake lines, speedometer cable if there is one), and dropping the wheel and fork tubes CAREFULLY to separate the two pieces of the fork tubes. Then grab the old seal and replace it with the new seal.

This short description is a VERY abbreviated and simplified version. It's not hard once you have done it a couple times but be very careful not to bend anything in your forks. They have springs inside them too. Change the oil while you are in there. Usually 10 or 15 weight fork oil but look in your manual. If you can't find a manual post again with your bike's year and we will see what we can come up with.

Apr 24, 2009 | 1980 kawasaki KZ 1300 A2

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4988 Answers

yadayada
yadayada

Level 3 Expert

80417 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...