Question about 1993 Suzuki GSX 600 F (Katana)

1 Answer

I Have a 1995 GSX750f i bought off line. Got it home and couldn't get the thing the fire up. Since than I've had the carbs clean, plugs change to the factory stranded NGK's, as well as the wires checked, and have had the fuel tank removed and cleaned with new gas put in to it. Now my bike fires up when choked no problem. But now it will not sit and idle when warm, just wants to die if i dont feather the throttle. It also dies when ever stopped because it just will not idle. When its really warm it will loss all response in first and just not start up at all until cooled down. My question is what do i do? Could it be that the carbs just need to run a few tanks through to level back out or am i looking a bigger problem? PLEASE HELP!!!!!!!!!!!!!

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 105 Answers

When you cleaned carbs you missed the idle jets one per carb they are very small it takes a small screw driver allso try some sea foam its carb cleaner get it at auto store Hope i was some help MOPAR KENNY

Posted on May 22, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Murray B&S riding mower turns over but never fires.


Sounds like you have done a good job of trouble shooting. You should check again and see if there is spark at the spark plug. If so great. If not you need to bypass the key switch and try again. Are you getting fuel, a dirty carb can look clean, the smallest spec of dirt can get in a jet and drive you crazy trying to find it. If you are getting fuel is it fresh? Old gas is one of the biggest causes of a no start situation,change your fuel. If these things pass you will need to check compression or even pull the muffler off and look for scoring on the piston and cylinder.if this is the case you ne to rebuild the engine.these are basic quick things to check and one of them will tell you what the problem is. good luck.

Jun 20, 2013 | Yard Machines Garden

1 Answer

Brand new genpower 8kva generator wont start


Thankyou Keithdandy. It seems you know what you're talking about and even read the bit about it being a DIESEL (no plugs or carb). It's dark and we're tired now but we will certainly look at the valves first thing in the morning. (the mist bit gave it away!!) thanks again.

Nov 23, 2012 | Electrical Supplies

1 Answer

Ares 110cc four wheeler won't start gas not getting to carb


chk your tank and lines for trash blockage, when you get fuel to the carb go from there, the overflowing is caused by the needle valve in the carb sticking open, usually caused by trash in the fuel, make sure you are getting fire to the plug as well, I know for a fact the wiring systems on these things are not quality systems.

Oct 25, 2012 | RTO 110cc Basic Manual ATV # ATD-125C

2 Answers

1981 Honda CX500D keeps stalling


Unlikely to be a starter motor try changing your spark plugs and checking battery. Hope this helps.

Oct 19, 2012 | Motorcycles

2 Answers

On Craftsman Blower serial 07101 N200438=25cc TWC Model 358-794964


I NEED TO REPLACE THE GAS LINE ON MY CRAFTSMAN MODEL 358-794964

Jun 26, 2012 | Craftsman 25cc 2-Cycle Gas Blower/Vac

2 Answers

Working on a Stihl 16" 031AV Chainsaw and have


Plug may have weak spark, as odd as it sounds it does happen, try fresh plug.

Sep 02, 2011 | Garden

1 Answer

I have a 95 Road King that isn't running right, it


Backfiring out of the exhaust is usually an ignition problem. Unburned fuel is getting into the exhaust system because it's not being ignited in the cylinder. When the engine fires on that cylinder again, it ignites the raw fuel in the exhaust causing the pop that people call a backfire. I'd investigate the ignition system. Connect a timing light to each of the spark plug wires if it has a single fire ignition or either of them if the ignition system is the stock dual fire. Start the engine and watch the timing light to tell if the engine is missing as the light will miss a flash.

Good Luck
Steve

Jun 05, 2011 | 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

1991 gsx750f running lumpy


balance the carbs and clean the plugs.

Aug 18, 2009 | 1991 Suzuki GSX 750 F (Katana)

Not finding what you are looking for?
1993 Suzuki GSX 600 F (Katana) Logo

305 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...