Question about Suzuki Mius 40 Motorcycles

1 Answer

I did a value job now it will not start could my timing be of GS500F thank ruben

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 738 Answers

Hi ruben, you obviously know what u are doing ,to do a valve job, i would think you have rotated the engine by hand before trying to start it, and you have positioned the camshafts and crankshaft, in the correct position aligning the marks on the corosponding item,if you can rotate the engine without any obstruction occuring the chances are you have timed it correctly, however doing a valve job could mean you will have to reset the valve clearences to alow the valves to close fully, recheck the clearence between the valve and cam lobe on each valve, also recheck you have correctly fitted the spark plug caps on the correct plug.
Recheck the fuel and vacume pipes are correctly fitted to fuel tap.
The engine will not run if the valve clearences are not alowing the valves to close fully. Paul

Posted on May 21, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Why is key sign flashing on dash when engine is on 2001 honda civic ex

battery low on keyfob ? as it cant be anything with antitheft or it wouldn't let you drive it away

Mar 10, 2016 | 2001 Honda Civic 1.7

3 Answers

What's the password for 2QFLS-91 595B authentication system

Since this is a Service Tag then you need to change the BIOS password. Easiest way is to get the BIOS reset software directly from Dell's website, burn it to a CD/DVD, remove the hard drive, and start the machine from the optical drive. There are several related applications on their site but only one will do the complete job of changing the BIOS, changing the Service Tag ID, etc. The others will only do part of that task.

Mar 19, 2015 | Dell Latitude D610 Notebook

1 Answer

How do you bypass the kill switch on a 1994kaw,ninja Zx600E

hi Ruben the switch is a make or break so just take the 2 wires of the solder points on the back of the switch job done why do you want to do this ? that switch has saved my life many a times lol

Feb 05, 2015 | Motorcycles

1 Answer

05 gs500f starts and dies when throttle is engaged

I have to say, it sounds like ti's out of gas.

Apr 01, 2014 | Suzuki GT 500 Motorcycles

1 Answer

I have a gs500f and sometimes I press the start button and I get a loud click if I press it several times (more clicks) then the engine turns over. Sometime I have to bump start. But most times it starts...

sounds like you have a little corrosion build up in the switch. buy some contact cleaner at your local auto parts store, take it apart and clean it.

May 12, 2010 | Motorcycles

2 Answers

2007 Suzuki GS500F, Starter problem

weak wires are sometimes the cause of loss of power,if they have been really hot from trying to start and become higher in resistance. looking at the ends of wires where connection are sometimes can reveal bluing of the copper inside (signs of heat). loose cable ends look good but dont perform well.Test charging system for proper charge output to voltage reg. and battery.Short tolerance to load under start conditions could be due to not being charged at high enough volts from charging system. (too many chicken lites or other stuff drawing current)

Mar 27, 2010 | 2004 Suzuki GS 500 F

1 Answer

Finisher keeps acumilating print jobs assuming they are not separte ones.

It is possible that the hard drive in the copier is about to fail. Has it gotten worse??

Mar 15, 2008 | Ricoh Aficio 1035 Copier

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76630 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides