Question about 2003 Triumph Sprint RS

1 Answer

I have a 2004 triumph rs sprint 900 and washing it today one of the indicator stems broke and finding it hard to get a replacement one thaught about LED'S are there problems doing this i've seen posts where there not compatable with some bikes and it causes big problems for them any advise would help thanks jeff

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Mate not really an answer but my 2002 triumph datytona, has got LED's on the front and i have no problems with them and have you tried Ebay for replacment ones.

Posted on May 24, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2011 Triumph Sprint GT high idle


Hey Graham..
Have you had it tuned up lately...if you had the valves adjusted, the intake valves are too tight...if no one has been adjusting your valves.. you might have an air leak..??
Does the engine rpm's "kinda float" around for a few seconds..idling high then settle back to normal..? .. YES. then its a classic symptoms of too tight intake valves.

Jun 28, 2017 | 2012 Triumph Sprint GT

1 Answer

Replacing the rear footpegs on a 2010 Sprint ST


Hi, Michael for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Triumph, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Sprint footpegs Where do find them
MFW Vario Footpeg Mounts for Triumph Sprint ST 1050 05 13 Sprint GT 10 12...
Triumph Sprint ST Service Manual
Hermys Tire Cycle Inc 2006 Triumph Sprint Genuine Motorcycle Parts in Port...
Triumph Sprint ST Owner Handbook Manual

Jun 13, 2017 | Triumph Sprint ST Motorcycles

1 Answer

Are there any specific handlebar riser's on the market for a 2008 Sprint ST 1050 which are worth buying?


Hi, Glenn the answer to this question is way above my pay grade and for this situation, I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Handlebar risers Triumph Sprint ST 955 01 04 Sprint ST 1050 05 Sprint RS...
Bar Riser Install on 2005 Sprint ST 1050
Triumph Sprint ST Service Manual
http://www.triumphestore.com/
Triumph Sprint ST Owner Handbook Manual

Apr 28, 2017 | 2008 Triumph Sprint ST

1 Answer

I had a gas leak coming from the female or male fuel line connector I repaired the plastic connector but the bike still won't start.


Hi, Denim and the usual suspects are:
1. Fuel tank empty.
2. Fuel supply valve/petcock turned off.
3. Fouled spark plugs.
4. Engine flooded as a result of overuse of the enricher.
5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
6. Fuel valve/petcock or filter clogged.
7. Severely discharged or damaged battery, you need 12.5 volts or better and be able to pass a load test if necessary.
8. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
9. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
10.. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
11. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2, TPS, ETP, IAC,or BAS).
12. Faulty neutral, clutch lever, or kickstand safety switch.
13. Faulty fuel pump or fuse or relay.
14. Tilt sensor needs a reset.
15. Security system not disarming alarm needs a reset.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
955i won start Problem Solving Tech Forums Messageboard Triumph Torque
Sprint RS Starting problem
Topic 2005 Triumph Daytona 955I Will not Start Read 8797 times
Triumph Sprint RS 1999 2004 Factory Service Repair Manual Download Manuals...

Jun 08, 2016 | 2001 Triumph Sprint RS

1 Answer

Have a 2000 Sprint rs won't start have spark change fuel pump an stepper motor cps sensor has 564 ohms changed computer saloon


Two things fixed mine first a new battery, the Sprint needs a really good charged battery to start, not just an old charged battery. Even jump starting didn't work for me. Second non ethanol fuel, these engines hate ethanol.

Aug 16, 2013 | 2000 Triumph Sprint RS

2 Answers

2000 Triumph Sprint RS idles high


Sounds to me like one of three possible problems, or some combination of them.

1) Loose or damaged vacuum hose to the MAP sensor. Check all the hoses to your throttle bodies.

2) Bad O2 sensor. Use multimeter to check or take to the dealer (or buy and use Tuneboy.)

3) Throttle Bodies need to be synced. Again, requires trip to dealership

Jun 18, 2017 | 2000 Triumph Sprint RS

1 Answer

When starting my 2001 triumph rs sprint it will, occasionally, not turn over. The lights & all electronics, including the gauge cluster, go dead as soon as I thumb the starter button. I have pulled...


Hi, Motoman774 if you suspect a faulty ground cable you can always add another generic cable of the same gauge and ground it to the frame or engine to validate your suspicions also before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Sprint RS Starting problem
What to do When Your Motorcycle Won Start
Triumph Sprint ST Service Manual
Hermys Tire Cycle Inc 2001 Triumph Genuine Motorcycle Parts in Port...
Triumph Sprint ST Owner Handbook Manual

Jun 01, 2017 | 2001 Triumph Sprint RS

1 Answer

2009 st sprint frame touch up paint


http://www.triumph.co.uk/uk/2046.aspx

you can find the code on there web site, if you dealer cant provide it try your local auto paint shop they can match anything with todays technology..

Dec 20, 2009 | 2006 Triumph Sprint ST

1 Answer

I NEED DIAGRAM OF VACUUM SYSTEM TRIUMPH SPRINT RS 2000


http://www.nirvana-motorcycles.com/Triumph%20Sprint%20ST%20RS%20955%20Service%20Manual%201999.pdf

Oct 16, 2009 | 2002 Triumph Sprint RS

2 Answers

Looking for an owners manual for my 1993 triumph


did this help?
here is one but it cost i couldn't find any free one sorry
http://www.themotorbookstore.com/trium19.html

Apr 30, 2009 | 1993 Triumph Trident 900

Not finding what you are looking for?
2003 Triumph Sprint RS Logo

Related Topics:

136 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4821 Answers

yadayada
yadayada

Level 3 Expert

78936 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...