Question about Suzuki GS 750 E Motorcycles

1 Answer

Chain broke im replaceing it how do i get the new chain thru the transmition over the front sporocket

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 738 Answers

You will have to remove the front sprocket cover, best check carefully the chain did not cause any damage inside the cover to the crankcase when it broke, also check the sprocket for signs of ware as this may contribute to early failure of the new chain, paul

Posted on May 20, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My timing chain broke on my toyota 22re engine did i bend any valves and how do i check? it was idling at the time and it just died i diudnt hear any weird sounds it just died

Don't concern yourself with thinking you may have a bent valve or any other destruction inside. Just replace the timing chain and go on with your life. I've been thru timing chains also, nothing else ever happened. And I know these 22re's inside out, for the past 20 years or better. You just can't destroy them. One I just took of the road for frame repair has over 500,000 miles on it. Replace front main seal and sleeve twice. Anyway, if you've never replaced a 22r chain, get a Hanes manual at any Pep Boys auto parts outlet to find out how to do it. Just be sure to follow the instructions explicitly. You don't want the timing off evn a single tooth.

May 06, 2017 | Toyota Cars & Trucks

1 Answer

Can a broke gasket around the timeing chain cause the car to smoke

yes because there are seals there for the oil and if it is leaking and the engine is hot, it will create smoke.

Sep 19, 2012 | Cars & Trucks

1 Answer

Timer chain.... what is it... My car went bang and will not start... but it is still trying to turn over...

There is a good chance it is. If you heard that bang, it might have broke. You have a front and back cover piece that protects the timing belt/chain. You can take that front cover off to check. It should only have one or two bolts. Take it off and see if the belt/chain is broking. If so, it will have to be replaced. If it is not, let me know. It may be other things. Sara, if you have a question, let me know.

Mar 04, 2011 | 2000 Ford Taurus

1 Answer

I took the exterra for oil change and after that it started to make a noise like little stones jumping in front in the hood inside.

If the noise is there all the time,I would suspect the timing chain

All Frontiers,Exterra and Pathfinders,2004 thru Nov 2009 have that problem

There is a new Borg Warner chain out, to fix that,of coarse any chain guide issues and oil activated tensioners,should be checked out or replaced

Nov 06, 2010 | 2004 Nissan XTerra

1 Answer

Chain is slipping and jumping gears

okay lets ask why it broke did it get jammed?was it worn?is your front crankset or rear gearset loose with play in it?does the chain make a clicking while pedalling hard? first and last require a replacement chain because it broke for a reason.if your drive gears are loose then you will have to adjust/repair them also checking adjustment on the derailuers should be checked.
hope this helps

Jul 13, 2010 | Mongoose Cycling

1 Answer

My toilet handel is ican install

Remove the water cover lid then remove the chain connector at the handle looks like a diaper pin then unscrew the nut holding the handle in place and feed the handle assembly threw the nut and buy new handle assembly and replace. IF it's just the chain is broke replace the chain they are sold separately at any hardware store. IF it's the valve you can replace it as well by shutting off the toilet water valve, next disconnect the hose and go buy a float assembly that is similar. Adjust the new float assembly to be the same length as the old one then install gasket on the float and put in the hole for the float, install second gasket on the float on the outside and then install the nut and install the hose. Before you tighten the nut on the float make sure the float valve lines up with the handle and the float then tighten down hook up new chain and tighten the water hose, tighten the nut on the float and open the water valve. Watch the water level fill up if it looks like it's going to run over you will have to adjust the float so that it does not run into the throat of the toilet.

Dec 10, 2009 | Mansfield Plumbing Products Mansfield...

2 Answers

Bike chain broke on my 21speed promax A series MGX,how do i replace it?

You will need to first determine what the chain broke. If it is because of where you will need to replace the can with a new on. If it was anothe reason then you have a couple options.If you want to repair this yourself you will need to have a bicycle chain tool. Otherwise your local bicycle shop can reinstall the chain for a very low cost, less then the cost of a new chain tool.

If you are going to install it you can remove the bad link and reinstall the chain, however this will likely make you chain too short.

If you are going to replace the chain:
1. Lay the old chain out completely.
2. Cut the new chain the same length as the old chain. If using the quick link provided then make sure to cut the chain with two male ends and make it one link shorter then the original chain.
3.Start installing the chain from the rear derailleur. Start putting the chain in from the lower pulley(wheel on derailleur). Push over the lower pulley and under the upper pulley. Then back up behind and over the cassette (gears on the rear)
4. Now continue pulling the chain to the front. Go through the front derailluer and down around the chainrings.
5. Connect with the other end of the chain.
6.Use the quick link provided with the new chain or push the pin back into the chain (unless in is a shimano chain, then use the provided new pin)

Jul 12, 2009 | Mongoose MGX Maxim Dual Suspension...

1 Answer


the chain type is 428. take chain off and count # of links.give those 2 #s to parts guy. when you replace a worn chain,the front and rear sprockets should be replaced at the same time, because worn sprockets and a new chain will cause accelerated chain wear. count # of teeth on sprockets & give those 2#s to the parts guy also. if you want a longer wearing chain, buy one w/ the highest tensile strength,once again, parts guy can help you find that.dont forget,lube & adjust chain as needed.

Feb 17, 2009 | 2003 Suzuki VL 125 Intruder LC

1 Answer

My chain saw

you need the correct size line, it comes new yellow colored now , claimed to be more impervious to gasahol -with a razor blade , cut the end of the new hose on a long enough angle to feed it thru the tank grommet, then you can grab it thru the tank grommet with medical locking forceps - its a snug pull thru the grommet but easy - hope this helps

Nov 21, 2008 | Poulan Pro Chain Saw 46cc 20"

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

201 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76630 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides