Question about 1990 Honda GL 1500 SE Gold Wing

1 Answer

I have a 1995 Goldwing Aspencade. The digital clock just started changing time(minutes) every 5 seconds now. I have now idea why. Any help?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has answered 20 questions.

  • Expert
  • 66 Answers

First I would try the set knob on the right side of the instrument panel work it back and forth to see if is making contact. If that does not work disconnect the battery for 30 seconds or more and reconnect. There is a fuse in the bottom of the relay box on the left side of the bike behind the saddle bag check the 5 amp fuse.

Posted on May 20, 2011


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Why won't 1986 goldwing clock work

Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
1984 Goldwing Aspencade clock GL1200 Information Questions goldwingdocs com
1986 SEI Clock
Honda GL1200D Shop Manual
Honda GL1200 1986 Owner Manual

Apr 30, 2014 | 1986 Honda GL 1200 Aspencade Gold Wing

1 Answer

Radio goldwing

with your key insert by the clock box and hold it side ways as someone else pulls radio straight out.

May 15, 2013 | 1986 Honda GL 1200 Aspencade Gold Wing

1 Answer

How do I remove my digital clock from the dash of my 1986 Goldwing 1200?


Please follow the steps below to remove your clock. NOTE: the Meter Visor and Clock come out together.

1) Remove the left-hand side cover and the seat
2) Disconnect the battery negative lead
3) Remove the Windshield
4) On Aspencade and Limited models, do the following:
a. Remove the speaker grilles
b. Remove the screws for the speakers
c. Pull the speakers out, disconnect the wires and pull the speakers out.
d. Insert the ignition key into the key slot on the clock and remove the radio.
e. Remove the screws securing the Meter Visor
f. Pull the Meter Visor out and disconnect the connector to the clock.
g. Remove the Meter Visor and Clock as an assembly.

This will allow you to remove the clock.

If you find this help useful to you, please vote. Thank you.



Jan 09, 2011 | 1986 Honda GL 1200 Aspencade Gold Wing

1 Answer

After travelling over 15 miles say 10-20 minutes the bike wont start and yet if left 20 minutes or so will,any suggestions1986 Goldwing Aspencade

Had the same problem on my 1985 GL1200 aspy.
One of the pulse generators had an intermittent error. With time, it became worse. I replace the pulse generator set and problem gone. Pretty difficult to find, especially as I reasoned that 2 cylinders oughtta fire if one pulse generator worked. Wrong assumption. On the 1985, one dead pulse generator means no ignition. So check the spark when it's dead. Did take me a long time to figure out.
Good luck

May 29, 2010 | 1986 Honda GL 1200 Aspencade Gold Wing

1 Answer

How do I remove the radio from the fairing on a 86 goldwing

In between the radio and the digital clock you will see a key hole. Using the ignition key, this will unlock the raio cassette unit and you can pull the entire unit out of the fairing. There are no bare wires, only copper contacts. By bending each of the contacts at the rear of the unit out a little, you may have better contact when the unit is inserted again. The contacts do become compressed over time and this might solve your problem.

May 19, 2010 | 1986 Honda GL 1200 Aspencade Gold Wing

1 Answer

1986 sei 1200 goldwing It will start from ignition on,fuel pump runs for a few seconds,fuel light goes out,every thing normal-no LED diagnostic lights.When it starts it will run for about 3-5 seconds &...

check the fuel filter it sounds like it's pluged and causing too much back presure this is causing an over load in the fuel pump causing it to stop working or to presure lock

Aug 03, 2009 | 1986 Honda GL 1200 Aspencade Gold Wing

5 Answers

My radio on my82 honda goldwing dont have sound

(Better1969) is correct. I just bought a 1983 Aspencade and there was no sound to my speakers. The gentleman I bought the bike from supplied new speakers but I quickly ruled that out. There are 3 fuse links behind the left turn signal in the fairing. 1 was a 1 amp, 1 was a 2 amp and the blown fuse was a 5 amp. I didn't have a 5 amp so I put a 2 amp in its place. So far the sound is still working but my FM radio reception is very poor.

May 14, 2009 | 1986 Honda GL 1200 Aspencade Gold Wing

2 Answers

I can't change the time of the clock on the Hyundai 50645P CD player/AM FM clock. There is no information in the Sante Fe manual. Any advice?

Try this, put the key in the ignition and let it be on the first turn right marked "ACC" or you can turn off the stereo and you will notice that only the Digital Clock screen will show. Turn the Volume/Audio/Sel knob and press on the "DISP" button simultaneously for about 4 seconds then release the "DISP" button. The digital clock will start blinking, and then use the Tune/Seek arrows pointing up and down to change the time. If the hour digit is blinking change the hour and after you have changed it press "DISP" then the minute digit will start to blink change it using the arrows, when you are done press "DISP" again or leave the clock for between 4 to 8 seconds the clock will start working normally.

I hope this works for you.

Good luck!


Apr 19, 2009 | 2004 Hyundai Santa Fe

1 Answer

1985.5 PORSCHE 944 digital clock. I am trying to change the time on the digital Clock. This was never stated in the manual that came with the car. Any help is greatly appreciated Trey

hi , I hope this help you out. the digital clock of your porsche 944 late 85 is a chronometer also.
this digital clock has three buttons, lets call them A,B,C from left to Right.
to set the time press the B Button for 5 seconds. the digits should be flashing by that time.
It will show you the option of 12H or 24h Mode, press the A button to select what you want, after push the B button to select the Hours it should be blinking Press the A button to select your time. repeat step to set the minutes.when your done Push the C button.

By now your digital clock would be set. the chronometer is the C button. to switch between clock and chronometer push C button, if you select chronometer. the A button start and stop, the B button Reset. Good Luck

Apr 17, 2009 | 1985 Porsche 944

2 Answers

Crash bars for honda goldwing aspencade

I have had good luck by going on the web. Google " motorcycle salvage honda " and see what you can find. Hope you can find what you need.

Please rate this solution. Thanks Dustin!

Apr 02, 2009 | 1997 Honda GL 1500 Aspencade Gold Wing

Not finding what you are looking for?
1990 Honda GL 1500 SE Gold Wing Logo

214 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers


Level 3 Expert

76109 Answers


Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides