Question about kawasaki GPX 750 R Motorcycles

1 Answer

Where is the fuel tap ? - GPX 750 R kawasaki Motorcycles

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 185 Answers

Usually directly under the the petrol tank but if you cant see it then look for a hose from carbi and follow it back to the the petrol tank and the fuel tap should be somewhere along the fuel line as you need to turn fuel on or off to the carbi It is usually nice and accessible so you can easily turn fuel on, off or to reserve tank if you have one?
what bike is it ?

Posted on May 20, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Gasoline don't get to the carburatore


check the fuel tap, the fuel pipe and the vent in the fuel cap. Also check for air locks in the pipe. And of course check there is fuel in the tank.

Jul 04, 2016 | Garden

1 Answer

My 93 Honda CBR600 TURNS BUT Wont start. it started yesterday but was leaking fuel through the fuel lines so turned it off n took gas tank off n replaced hose clamps n put back together n now it wnt start....


When you put the fuel hoses back and refitted the tank, did you make sure the vacuum tube to the fuel tap was reconnected ?

The fuel tap has a vacuum connection in order that the fuel is automatically cut off when the engine stops - the tap has on-off-reserve manual settings, but this is overridden by the vacuum. So, even if you have set the tap to "on", if the vacuum hose is disconnected/blocked/leaking, no fuel will reach the carbs.

The vacuum hose is about half the diameter of the fuel hoses and connects to the smaller spigot on the tap, and either the number 1 or 2 cylinder vacuum take off point on the carbs.

Feb 24, 2014 | Honda CBR 600 RR Motorcycles

1 Answer

CB200 Honda, how do I stop fuel coming out of the fuel tap even when it's in the off position?


normally there is a rubber seal that is the tap but in this case get a new tap

Aug 01, 2017 | Motorcycles

1 Answer

I have a Baldor 6000W generator with a gx340 11hp engine. I have drained the tank and carb and put new gas and sea foam in it. Also I have replaced the spark plug and fuel filter. The engine will...


It sounds like the engine is not getting enough fuel for it to run. First check that you have the fuel tap in the on position. If the fuel tap is on then the carby might be blocked or the needle & seat are not working properly. Turn the fuel tap off. Then take the fuel bowl off. You will then see a plastic float,turn fuel tap on. Fuel then should be flowing from carby. Push the float up and this should stop the fuel from running. Do this a couple of times to ensure that it is working correctly. If all is good after that then turn fuel tap off. Put fuel bowl back on, turn fuel tap on and test. If no luck, turn fuel tap off. Then you will need to take the carby off the motor and clean it using carby cleaner. Be sure to spray cleaner in all holes of carby and blow out carefully with air compressor. Put carby back onto motor and turn fuel tap on and test.

Jan 06, 2011 | Honda 8 HP Engine

1 Answer

Where is the prime position on the fuel on a GSX 750 fn


THIS IS QUITE EASILY RECTIFIED, REMOVE THE FUEL LINE FROM THE TAP,SLOWLY TURN THE TAP FROM 1 DIRECTION TO THE OTHER, WHEN FUEL FLOWS READILY FROM THE OUTLET ON THE TAP, NOTE THE POSITION ON THE TAP AS FUEL WILL ONLY FLOW WHEN IN PRIME POSITION. {VACUME TYPE TAP REQUIRES ENGINE TO RUN FOR FUEL TAP TO OPEN, WHEN NOT RUNNING FUEL SHOULD ONLY EXIT THE TAP IN PRIME POSITION). REASON FOR FUEL FLOW WHILE NOT RUNING WITH TAP IN ANY POSITION, COULD BE DIAPRAM FAILURE IN TAP.

Dec 04, 2010 | 1998 Suzuki GSX 750 F (Katana)

1 Answer

How do I drain the fuel on my 98 zx9r


go to fuel tap find the pipe which goes to the carb, (make sure your fuel tap is in the off position) disconnect the pipe from the tap (Long nose pliers work0 take off the fuel tap remove the tank from bike find a suitable container for the fuel open the tap and let it flow

Aug 08, 2010 | 1998 kawasaki ZX-9R Ninja

2 Answers

Why is gas going in my oil pan


Check your fuel tap (petcock) to be on "on" position. If you set it on "pri" it will let fuel flow without vacuum from engine. Gas flows in the carbs when bike is parked and overflows from there into the engine and down into the oil pan. If putting the fuel tap on "on" does not help then check if the tap flows fuel when engine not running. It normally should not.

Apr 03, 2010 | 1990 Honda CBR 600 F(1)L

1 Answer

My bike starts but dies right away what's wrong


Sounds as if you don't have any gas to give it! Turn off the tank fuel tap, remove the carburetor fuel hose, and place the end in a clean can or jar. Turn on the tap again--you should get a small stream of fuel running from the hose. If it just drips, turn off the tap again, unscrew the small bowl under the tap and remove the brass filter screen just above the bowl. Soak it for a while in carburetor cleaner, rinse in fresh cleaner, then put it all back together. Turn on tap again and check for fuel flow. If still weak, turn the tap to 'reserve' position--is the flow still weak? If so, remove the fuel tap bowl and place the can/jar underneath and turn the tap on again. If still slow, open the fuel cap up on top to make sure that tank vacuum is not stopping flow. If nothing helps, you will need to remove the tank, drain the fuel out and remove the fuel tap to clean the two tubes that are sticking out of the top. You may need compressed air to get this accomplished. Good luck!

Oct 21, 2009 | 1988 Honda XR 250 R

2 Answers

Where is fuel tap on skyjet f5 125


There is a fuel Tap on the skyjet however it cannot be turned on and off its always on ... Its located under the petrol tank

Jul 05, 2009 | 2006 Honda CBR 125 R

1 Answer

Tapping noice when the truck is running its sounds like tap,tap,tap,tap,tap,tap


It could be a bent valve, push-rod/s, piston slap, connecting rod bearings,bad fuel, timing, could need a tune-up,knock sensor, bad fuel, or water in fuel. You can start by looking at the vehicles repair/maintenance history, preform a dry and wet compression test,and take it from there. If I can be any more help let me know, thank you.

May 31, 2009 | 1992 GMC Sonoma

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

167 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75117 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...