Question about 2003 Yamaha YZF-R6
Hi, Max_murillo and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
2003 2004 Yamaha YZF R6 Service Manual R6 Moto Data Project
OEM parts for Yamaha
Posted on Sep 27, 2016
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
sorry.. i don't know off the top of my head but super simple way to check.. get an electrical tester that pierces the wire and turns on a light.. ($5 at walmart--seriously) turn on left signal, check the wires.. the one that is flashing is your left signal... so on and so forth..
(this tool will be super handy in the future also)
Posted on Sep 17, 2009
your bast bet is to contact a main dealer they will want reg,vin and engine number to order you a new key dont disconect the ignition because if there is a moblizer on it you will need to reprogramme the brain will work out exspensive, contact main dealer first
Posted on Oct 17, 2009
if your cooling fan is not switching on then i would check fuses then if all fuses are good check for 12V at you cooling fan when temp gets between half and 3/4 way to hot . if you have no voltage it could be a temp sensor or relay . if you have voltage there your fan motor has gone bad and needs to be replaced . another thing to check is the hoses running to the radiator . let the bike idle and warm up and check the temp of the radiator hoses . if one is much cooler than it should be then you might have a bad thermostat on your bike and its not opening enough to let coolant flow at idle. water pump could be going bad as well. if the bike warms up and fan does not kick on untill you rev it up a bit i would check the thermostat and waterpump
Posted on Oct 30, 2009
Tips for a great answer:
Dec 08, 2012 | 1985 Buick Skyhawk
Mar 18, 2012 | 2003 Yamaha YZF-R6
May 22, 2011 | Volkswagen GTI Cars & Trucks
Feb 10, 2011 | Kenwood KDC-MP335 CD Player
Dec 31, 2010 | Car Audio & Video
Oct 19, 2010 | Clarion Car Audio & Video
Aug 27, 2009 | RTO 110cc Basic Manual ATV # ATD-125C
Jul 09, 2009 | Car Audio & Video
Aug 04, 2008 | Sony CDX-M610 CD Player
May 13, 2008 | Alpine CDE-9843 CD Player
18 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: