Question about Aprilia Pegaso 650 Road Motorcycles

1 Answer

I have a 08 pegaso 650 i washed it the other day with bucket of water (no pressure washer or hose pipe) and now im struggling to start it, it starts for a few seconds but is really ruff then cuts out,i cant think that its water as i have washed it many times this way. any suggestions would be grateful

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

It probebly is a water prooblem or take spark plug out check it if its black then you need a new spark plug or you may have got water on your electrics let me know if not ile help some more.

Posted on May 19, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i drain the washer for moving it


Mike,

I cannot tell whether you are talking about (1) the little bit of residual water in the machine after it's done, or (2) about a machine that's stopped mid-cycle with a good deal of water, so I'll respond to both cases.

(1) The lowest point in the washing machine is the drain outlet at the back to which the drain hose attaches. First remove the free end of the drain hose from the drain pipe and place it in a bucket sitting on the floor. That will get most of the water. Then place a towel on the floor and remove the other end of the drain hose from the machine. Remaining water will spill out from the outlet and hose onto the towel. You might get a little more if you lift the front of the machine, tilting it backward.

(2) If you can't drain the machine and it's full of water, you will need to siphon it. Take a piece of tubing, at least five feet long. You could use a piece of garden hose if you have nothing else. If you don't have a door or window nearby, you will need TWO buckets. Place the buckets on the floor in front of the machine. Place the siphon hose into the washer tub starting with one end to fill it with water. When it's completely in, cover one end, take it out, place it into a bucket. If the siphon doesn't automatically start, get down low on the floor, place the hose into your mouth and inhale. You may have to do this several times, possibly covering the tubing end with your tongue between inhalations. When the bucket is nearly full, switch the hose to the empty bucket and empty the first one. You will probably have several buckets of water. (Of course if your washing machine is near an outside door, you can simply start the siphon outside and omit the buckets.)

Oct 02, 2014 | Washing Machines

2 Answers

Water surges when you pull the trigger


If you have not flushed all air out of hoses prior to starting motor this may be the first symptom. If the water pressure from the spigot is competing with the clothes washer, shower etc. there may not be enough pressure to supply the demand of your pressure washer. A gauge attached to the spigot can give you a gallons per minute reading or take a five gallon bucket and time how long it takes to fill the bucket. ie: if the bucket fills in 2 minutes you have 2.5 gallons per minute. You may need this much to get un-interupted pressure for a 2400- or 2500 unit. Most residential properties are pipe sized from 3/4" pipe at the water main spigot at the front of the house down to a 1/2" pipe size at the rear of the house to maintain pressure.

Jul 09, 2012 | Karcher 2500 PSI Pressure Washer

1 Answer

F-05 flashing on my Hotpoint W860 but it's full of water, how do i fix


The F-05 error indicates that the drain is clogged or the pressure switch is stuck. Get a bucket to minimize flooding your washer area. Turn off the washer. Then pull the drain hose from the waste pipe and check for blockages. Check the waste pipe as well. Some find boiling water will clear the blockage. See if the machine will drain when you turn it back on.

Next check the filter is clogged This is near the pump and accessed from the back of the unit. Again you will a bucket to collect the water when you look at this. Next check the hoses at the dispenser for solidified detergent and such (take off the top cover and disconnect the flexible hoses). Finally check the rubber pipe connected to the pressure switch for a blockage.

If none of the above solve the problem, the pressure switch is probably faulty and should be replaced.

I hope this helps.

Cindy Wells

Jul 25, 2011 | Hotpoint Ultima WF860 Front Load Washer

1 Answer

HE3t has an FH error code checked the following and are OK. pressure switch, flow meter, and inlet valves water flows in without restriction. What else could it be? Craig


Hi,

Thank you for contacting fixya.com.

FH error code means low water inflow. In this error washer is not filling when the fill valve opens.
To clear the error please follow the bellow instructions:-
Press the "Stop" button twice with your finger. This cancels the cycle and stops the washer. Unplug the power cord from the wall outlet.Turn the water shut off valves clockwise to stop the water flow to the washer through the supply hoses. Pull the washer away from the wall enough that you can access the hose connections at the back of the washer.

Set a bucket under the area of the hose connections. Unscrew the hose connections from the back of the washer. If necessary, use a pair of slip joint pliers to help start the connections turning until you can turn them by hand. Set the ends of the hoses inside the bucket.Inspect the screens on the inlet ports on the back of the washer where the hoses connect. Sediment and other debris can block these screens, causing fill problems. Clean the screen with an old toothbrush.

Thread the hoses back onto the washer. Look for kinks in the hoses. Kinks cut off water supply to the washer which causes the FH error code. Once you connect the hoses, turn the water supply valves counter-clockwise to supply water to the washer. Move the bucket away from the washer and push the washer back into its working position.Plug the power cord back into the outlet and start the wash cycle again. If the FH error code comes up again, call a service repairman. If the hoses have no kinks and the inlet screens are clean, there is a problem with either the pressure switch or the flow meter.

Please get back to us if you have further query else please accept the suggestion.


Jun 02, 2011 | Kenmore 3.8 cu. ft. HE3t Front Load Washer

1 Answer

NFW7200TW...How can I disconnect the drain hose when the washer has water? Won't the spill ruin the pump and other electrical parts?


turn the water supply off. disconect the end of the drain hose that goes into the sink or stand pipe. have a couple of buckets and a few old towels to catch the water. slowly lower the disconected end of the drain hose untill water starts to come out. when the bucket fills raise the hose back up and the water flow will stop. continue to drain the water untill the hose can go clear to the floor without water coming out. there will still be a little water in the machine but not more that two or three towels can soak up

Apr 22, 2011 | Washing Machines

2 Answers

Not sucking up the water from a bucket


Make sure first you are using the correct nozzle, see this link

Then if you are still having problems it is going to be something wrong in the detergent valve, see this link to give you more information on repairing that

Nov 01, 2010 | Karcher Garden

1 Answer

Hi i have a k3.65 jubilee model when switched on it constantly surges and the water pressure is not as good as it was its only 10 months old.any advice


Have the hose pipe running into a bucket/container and use another short length of hose from the pressure washer to **** the water out of the bucket, that way if the bucket is full when you start, any drops in mains pressure wont affect the pressure washer as their should always be a reservoir or water to keep constant pressure.( you may need to prime the suction hose first, just hold the 2 hoses together in the bucket of water with pressure washer on)
Any questions ask
If this helps please rate me

Oct 19, 2010 | Karcher Garden

1 Answer

Leak from pipe/wahing machine drain hose


try running the snake from the top to the bottom. they ell pressure hose ends that you inser into the pipe on the end of a hose and when you turn the water on it weslls and applies pressure to push out whatever is in there. they cost about 8.00 and you can buy them at lowes or home depot. just tell them what you need and that it screws onto the end of a hose for unclogging backed up drains. im not sure whats its called but they will know

Feb 01, 2009 | Estate TAWX700JQ Top Load Washer

1 Answer

I have a front load washer. When I push the start it makes a humming noise but no water enters the washer. HELP


either your not getting any water from the water faucets turn them off remove the hoses from the back of the machines and make sure the screens are clear on the water valves then get a bucket and stick the hoses in the bucket and turn them on to make sure the valves are working if all that's good replace the washer valves low water pressure can cause this also

Mar 18, 2008 | Washing Machines

1 Answer

Washer machine Won't drain


more than likely that it is blocked pull the washer clear so you can see the back get your outlet hose and place into a bucket and see if the water comes out if it doesnt than pump/pipe blocked better off taking washer outside because when you release the outlet pipe from your pump thert will be alot of water that will come out if it comes out of the pump than your pipe will be blocked m8

Aug 14, 2007 | Tecnik TKL9260 Front Load Washer

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

122 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aprilia Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Fabrice Wolters

Level 2 Expert

206 Answers

Are you an Aprilia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...