Question about 2007 Benelli Tre-K 1130

1 Answer

Where to find adjustable levers u.s.a. - 2007 Benelli Tre-K 1130

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Benelli Master
  • 42,912 Answers

Hi, Skull_hill for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
https://m.facebook.com/249247278033/posts/1589575877961235
Trec Safety Brake Clutch Lever Set folding Benelli TreK 1130 07 15
https://dl.dropboxusercontent.com/u/35177464/TRE-K/User%20Manual.pdf
https://dl.dropboxusercontent.com/u/35177464/TRE-K/workshop_manual_TREK1130.pdf
https://dl.dropboxusercontent.com/u/35177464/Benelli/Katalog-d%C3%ADl%C5%AF-TRE1130K-MY07-VER.02.pdf

Posted on Dec 12, 2015

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Adjust handbrake in Hyundai tucson


The adjustment is made at the handle under the console:

ADJUSTMENT OF PARKING BRAKE STROKE

1.Pull the brake lever with a force of approx. 196 N (20 kg, 44 lbs.) and check the number of clicks.

Parking brake lever stroke (Standard value) : 8 clicks

2.If the number of notches is not the standard value, adjust the cable length with the adjusting nut on the equalizer.
3.The indicator light will go out when the brake lever is fully released, and will light up with the lever pulled one notch. If it does not operate properly, replace it.
4.After the adjustment, check that the rear brakes do not drag with the parking brake lever released.

Mar 05, 2015 | 2007 Hyundai Tucson Limited

1 Answer

Are the clutch and break levers adjustable


The levers are not adjustable but the cables are. Your brake cable has a knurled adjustment knob right where it comes out of the lever and your clutch cable has a accordian shaped rubber boot around the adjustment mechanism which you can find if you follow you clutch cable down from the lever.

Jul 10, 2012 | 2004 Harley Davidson FXST - FXSTI Softail...

1 Answer

1994 Jeep GC rear drum brakes grab on damp days and low speeds. All hardware has been replaced including new shoes and drums.


The Caliper Adjustment Lever is what adjusts the caliper - ensuring the brakes pads are in proper placement to the rotor for effective braking. The lever must be cycled in order to keep the calipers adjusted properly. The only way the lever is cycled, is by the usage of the e-brake.


zjlimited_1187.jpg

Remove the cable from the Caliper Lever. Be careful when handling and removing the spring.

zjlimited_1188.jpg

The Caliper Adjustment Lever is what adjusts the caliper - ensuring the brakes pads are in proper placement to the rotor for effective braking. The lever must be cycled in order to keep the calipers adjusted properly. The only way the lever is cycled, is by the usage of the e-brake.



Initial testing: After you have removed the ebrake cable - kneel in front of the rotor and give it a gentle shake (as if you were removing it). Do you notice any PLAY between the pads & rotor?? Make note of this.



For the TSM kit caliper adjustment instructions - visit here: Troubleshooting.htm#2 and click on "Adjust Caliper Parking Brake".

Good luck.

May 05, 2011 | 1994 Jeep Grand Cherokee

1 Answer

Instructions and diagram,to remove and replace rear drum brakes


1984 Ford Tempo - Rear Drum brake drum/shoes
REMOVAL & INSTALLATION


See Figures below instructions

1. Raise and safely support the vehicle with jackstands.

2. Remove the wheel, tire, hub and finally, the drum assembly.

3. Using a spring removal tool, remove the horizontal securing spring at the top first of the assembly.

4. Pull the adjuster locking plate away from the shoes.

5. Remove the lower horizontal securing spring.

6. Unfasten one of the 2 shoe hold-down springs and remove the pin.

7. Remove the brake adjuster.

8. Remove the remaining hold down spring and clip.

9. Lift the brake shoes assembly off the backing plate and wheel cylinder assembly. Be careful not to bend adjusting lever during the removal process.

10. Remove the parking brake cable from the parking brake lever.

11. Remove the horseshoe retaining clip and spring washer and slide the lever off the parking brake lever pin on the trailing shoe.



To install:

12. Apply a light coating of high temperature grease at the points where the brake shoes contact the backing plate.

13. Apply a light coating of lubricant to the adjuster screw threads and the socket end of the adjusting screw. Turn the adjusting screw into the adjusting pivot nut to the limit of the threads and then back-off 1 / 2 turn.

14. Assemble the parking brake lever to the trailing shoe by installing the spring washer and a new horseshoe retaining clip. Crimp the clip until it retains the lever to the shoe securely.

15. Attach the parking brake cable to the parking brake lever.

16. Attach the lower retracting spring to the leading and trailing shoe assemblies and install to backing plate. It will be necessary to stretch the retracting spring as the shoes are installed downward over the anchor plate to inside of shoe retaining plate.

17. Install the adjuster screw assembly between the leading shoe slot and the slot in the trailing shoe and parking brake lever. The adjuster socket end slot must fit into the trailing shoe and parking brake lever.



The adjuster socket blade is marked R or L for the right or left brake assemblies. The R or L adjuster blade must be installed with the letter R or L in the upright position, facing the wheel cylinder, on the correct side to ensure that the deeper of the 2 slots in the adjuster sockets fits into the parking brake lever.

18. Assemble the adjuster lever in the groove located in the parking brake lever pin and into the slot of the adjuster socket that fits into the trailing shoe web.

19. Attach the upper retracting spring to the leading shoe slot. Using a suitable spring tool, stretch the other end of the spring into the notch on the adjuster lever. If the adjuster lever does not contact the star wheel after installing the spring, it is possible that the adjuster socket is installed incorrectly.

20. Inspect your work to make sure it is correct.

21. Install the hub/drum and wheel/tire assemblies and adjust the wheel bearings.

22. Lower the vehicle and check brake operation.


archaeology_43.jpg

Fig.1 Exploded View of Rear Brakes - 1984 Ford Tempo

archaeology_44.jpg

Fig 2. Remove the brake shoe upper retaining spring with a suitable removal tool.


archaeology_45.jpg
Fig.3 Removed retaining spring - note spring direction.

archaeology_46.jpg

Fig.4 Remove the adjuster lock plate. Note the direction of the tab.

archaeology_47.jpg

Fig.5 Remove the lower retaining spring.

archaeology_48.jpg

Fig.6 Remove the Hold Down Spring - note brake spring tool used.

archaeology_49.jpg

Fig.7 remove the shoe adjuster. Note direction of the adjuster spline.

archaeology_50.jpg

Fig.8 Remove the hand brake cable.

archaeology_51.jpg

Fig.9 Remove the final brake shoe.

archaeology_52.jpg

Fig.10 All removed parts in order and properly oriented for re-assembly.

Apr 17, 2011 | 1984 Ford Tempo

1 Answer

How to installing brake shoes on back ?


First you have to compress the parking brake cable spring and attach the parking brake lever.
Clean and lubricate the brake backing plate.
Use silicon Brake Caliper Grease and Dielectric Compound.
Then,
install the rear brake shoes and linings:
1) position the rear brake shoes and linings
2) position the parking brake lever
3) install the brake shoe hold-down spring pins and the brake shoe hold-down springs.

Install the parking brake strut
1. install the parkig brake link spring on the parking brake strut
2. install the parking brake strut
3. Install the brake shoe anchor ping guide plate.

Install the short brake shoe retracting spring
1. Place the brake shoe adjusting lever cable over the anchor pin, with crimped side in
2. Install the short brake shoe retracting spring

Note: Make sure the brake shoe adjusting lever cable is positioned in the cable guide groove

Install the long brake shoe retracting
1. install the cable guide
2. position the brake shoe adjusting lever cable in the cable guide groove
3. install the long brake shoe retracting spring

Note: to prevent incorrect installation, teh socket of each brake adjuster screw is stamped R or L

Assemble the brake adjuster screw assembly.
1. apply silicone brake caliper grease and dielectric compound
2. install the brake adjuster screw into the brake show adjusting screw nut to the end of the threads and then loosen one half turn
3. install the brake shoe adjusting screw socket on the brake shoe adjusting screw nut.

Install the brake adjuster screw assembly
1. Position the brake adjuster screw assembly
2. Install the brake shoe adjusting screw spring
3. Position the brake shoe adjusting lever cable
4. Position the adjusting lever return spring and the brake shoe adjusting lever
5. Hook the brake shoe adjusting lever cable to the brake shoe adjusting lever.

Test the operation of the automatic self-adjuster
1. Pull the brake shoe adjusting lever cable and check that the brake shoe adjusting lever rotates the brake shoe adjuster assembly
2. Release the brake shoe adjusting lever cable and check that the brake shoe adjusting lever advances to the next notch on the brake shoe adjusting screw nut.

Adjust the brakes.

Install the brake drum.

Thats it

Sep 10, 2010 | 1998 Ford Ranger SuperCab

1 Answer

Easy steps for replacing clutch lever? -Mark


Follow the clutch cable downward until you get to the rubber bellows that covers the clutch cable adjuster. Slide the bellows up or down to gain access to the adjuster. Loosen the lock nut and turn the adjuster inwards making the cable as short as possible.

Remove the pivot pin for the lever and rotate the lever forward. Positon the lever so that it will come off the cable end. Lubricate the cable end and replace the lever with the new one. Reposition the lever and install the pivot pin. Readjust the cable adjuster so that you have approximately 1/8" of free travel in the lever.

Good Luck
Steve

Jun 18, 2010 | 2003 Harley Davidson XL 1200 C Sportster...

1 Answer

Clutch Cable Snapped


Hook the cable on the case lever then route the cable to the clutch handle. Turn the adjuster lock wheel all the way to the outer end of the adjuster then turn the adjuster all the way into the lever mount. This makes the adjuster as short as possible. Line up the cut-outs in the adjuster and the lock wheel to the cut-out in the lever mount. Hook the end of the inner cable into the clutch handle. Now pull the outer casing of the cable to the end of the adjuster. If the cable end isn't long enough to slide into the end of the adjuster then put the end of the outer cable on the adjuster shaft at the lock wheel and pull the clutch lever in. Now quickly release the lever while pulling the outer cable to the end of the adjuster. Normally it will pop into place so you can set the clutch lever 1/4" end play. You may need to try it a few times until you get it.

A “very helpful” rating for this answer? Thanks!

Jun 21, 2009 | 1981 kawasaki Csr 1000

1 Answer

Clutch adjustment on 2002 ninja 250


Your owners manual has the exact procedure listed in it-but here goes- you need to know how much play is at the lever on the handlebar. If it is excessive then the cable must be tightened up. The way you take out excessive play is to loosen the big round thing (the adjuster stop) and turn the smaller round thing (the adjuster) toward the front fender. If after you have adjusted the adjuster and retightened the stop you still have too much play at the lever, then you must adjust the cable down onthe lower right side engine case. You do that by turning the cable adjuster (at the lever) all the way back in toward the lever, you wan the full amount of play that there can be, so you take out the correct amount of slack down below. After turning the cable adjuster all the way in, next take your wrenches and go to the right side of the bike and look for the clutch cable coming down and across the lower outter engine case. It will be a big black cable having 2 "nuts" and runs thru a piece of metal on the top of the outter engine case. first loosen the stop nut, then tighten the adjuster nut in toward the back of the bike, keeping an eye on the lever at the handlebar. When you see the slack taken up, stop. Test the lever for suitable play (about 1/4" total at the lever ball end). When you have achieved the suitable amount of play, tighten the stopper nut and retest the handlebar lever. You make major changes down at engine level, you make minor adjustments using your cable adjusters at the lever.

May 03, 2009 | 2008 kawasaki Ninja 250R

1 Answer

I need a schematic for the rear brakes on an F150 super cab with 4.6L automatic trans 4wheel drive


Drum, Rear Brake System Standard Rear Brake
9969082.gif
Item Part Number Description 1 2069 Brake Shoe Hold-Down Spring Pin 2 — Rear Wheel Cylinder Retaining Bolt (2 Req'd) 3 — Washer (2 Req'd) 4 — Anchor Pin (Part of 2211) 5 — Wheel Cylinder 6 2028 Brake Shoe Anchor Pin Guide Plate 7 2A637 Parking Brake Lever 8 2296 Brake Shoe Retracting Spring (Short) 9 2296 Brake Shoe Retracting Spring (Long) 10 2200 Rear Brake Shoe and Lining (Secondary) 11 — Washer 12 2106 Parking Brake Lever Pin Retainer 13 — Brake Shoe Adjusting Lever Cable Guide 14 2A642 Primary Brake Shoe Parking Brake Lever Link 15 2A601 Parking Brake Link Spring 16 2068 Brake Shoe Hold-Down Spring 17 2A176 Brake Shoe Adjusting Lever 18 2048 Brake Shoe Adjusting Screw Socket 19 2047 Brake Shoe Adjusting Screw Nut 20 2041 Brake Adjusting Screw 21 2049 Brake Shoe Adjusting Screw Spring 22 2200 Rear Brake Shoe and Lining (Primary) 23 2A178 Brake Shoe Adjusting Lever Cable 24 2211 Brake Backing Plate
Heavy Duty Rear Brake
6dcb5d2.gif
Item Part Number Description 1 — Rear Wheel Cylinder Retaining Bolt 2 00538 Lock Nut 3 2212 Rear Brake Backing Plate 4 2262 Rear Wheel Cylinder 5 2A642 Primary Brake Shoe Parking Brake Lever Link 6 2A601 Parking Brake Link Spring 7 2A637 Parking Brake Lever 8 2106 Parking Brake Lever Pin Retainer 9 — Parking Brake Lever Bolt 10 — Secondary Shoe Assembly 11 2A179 Brake Shoe Adjusting Lever Cable Guide 12 2068 Brake Shoe Hold-Down Spring 13 — Adjusting Lever Pin 14 — Adjusting Lever Return Spring 15 2A176 Brake Shoe Adjusting Lever 16 2047 Brake Shoe Adjusting Screw Nut 17 2049 Brake Shoe Adjusting Screw Spring 18 2041 Brake Adjuster Screw 19 — Primary Shoe Assembly 20 2068 Brake Shoe Hold-Down Spring 21 2200 Rear Brake Shoe and Lining 22 2035 Brake Shoe Retracting Spring 23 2A178 Brake Shoe Adjusting Lever Cable 24 2092 Brake Adjusting Hole Cover 25 2069 Brake Shoe Hold-Down Spring Pin
The rear drum brakes:
  • Have internal shoes that expand against the brake drum (1126).
  • Are a single-anchor type.
  • Are actuated by one rear wheel cylinder (2262).
  • Have two pistons in the rear wheel cylinder (2261). One exerts force against the upper end of the primary shoe; the other exerts force against the upper end of the secondary shoe.
  • Adjust rear brake shoes and linings (2200) automatically.
  • Need manual brake adjustment if the adjusters are not operating properly or after the rear brake shoes and linings have been replaced.
When the brake pedal is applied, hydraulic fluid pressure forces the pistons in the rear wheel cylinder outward, moving the rear brake shoes and linings against the brake drum.
The rear drum brake system includes the parking brake mechanism. Refer to Section 206-05 .

Apr 04, 2009 | 1997 Ford F150 Regular Cab

1 Answer

JAGUAR XJ8 GEARBOX ADJUSTMENT


There is an adjustment on the selector lever on the side of the gearbox (lhs) make this longer to give the gear lever more travel.There is also an adjustment on the gearbox selector sensor for the electronics system.

Nov 16, 2008 | 2007 Jaguar XJ8L Sedan

Not finding what you are looking for?
2007 Benelli Tre-K 1130 Logo

Related Topics:

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Benelli Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Frank Richardson

Level 1 Expert

21 Answers

Jim

Level 3 Expert

842 Answers

Are you a Benelli Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...