Question about 2007 Peugeot Ludix One

3 Answers

Hi, my peugeot ludix is not running proper. think its the carberator timing or dirty filter. motor dies when i stop at trafic lights. also no pull on a straight road. no tuning just looking for a healthy scooter. please does some one have good advise for this bike? please.

Posted by on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 3 Answers

Try giving your carb a clean with a scooter there isnt timing there all belt driven is it a 50cc or higher

Posted on May 18, 2011

Testimonial: "hi, thax for advise. its a 50 cc. i will clean the carb then. thax again."

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the 07 rs12 you will probably find its the air to fuel ratio on the carb Iv had the same problem but I have over come it now

Posted on Jun 10, 2013

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi, would you be able to tell me why my peugeot ludix will not start, checked the carb and the spark plug.

Posted on Feb 20, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

3 Answers

Ludix one 50cc keeps cutting out


Take it back to the dealer and have them fix it if it is new.

Jun 28, 2014 | 2007 Peugeot Ludix One Dual Seat

1 Answer

2010 F 150 oil light warning and wont accelorate


get you a gallon of marval mystry oil drain your oil and filter put a little mystry oil in your old filter rinse it out put back on and oil plug too fill with mystry oil crank truck let it run for 3 min let cool of drain put in new filter and oil if problem still accelorate and oil light still stays on you might have problems with oil pump if oil light goes out and still problems accelorating try changing fuel filter if this doesn't do the job also crack you truck up (if it is carberated carb) take air fiter off carb intake pour a little mystry oil in carb very slowly while running this helps to clean deposites due this for about little at a time you will hear motor sound like choking stop let motor catch up do this for about 3-5 min then pour mysry oil in till motor dies let set for 3 min start motor them put gas treatment (STP) in gas tank this should do the job if you have furl injestion put one cup of mystry oil in gas tank and one bottle of (STP) and atleat 6-10 gal of gas. if this doesn't do the job you may need to tale the truck to a spec.

May 27, 2014 | 2001 Ford Focus

2 Answers

86 ford escort with carberator dies at stop


If the problem is not a vac leak, it could be the idle circuit inside the carb. You may have to replace or rebuild the carb to fix it.

Jul 07, 2013 | Cars & Trucks

1 Answer

PEUGEOT LUDIX BLASTER RS12 will not start, would the carburettor starter stop it starting if it is not working and is there anyway to test it ? the plug is sparking and the petrol is getting to the carb...


If you're getting fuel and spark, it should start assuming you also have compression. Try putting in a fresh plug; sometimes a plug will appear to have spark when you test it and wont spark under pressure.

Jun 28, 2011 | 2007 Peugeot Blaster RS12

1 Answer

I changed fuel filter ,fuel line to carberator ,rebuilt carberator and adjusted properly put new mixed fuel and coil is new and gets good spark motor has compression motor fires and stops runinng riteaway ...


Are you sure you pump in the unit properly? Some carbs have the gasket against the carb body and some have the pump next to the body. Also check the needle valve for proper operation,and dirt.

Jan 20, 2011 | Husqvarna Partner K1250 Cutoff Saw Air...

1 Answer

Why does the motor stall around 3000 rpm it is sitting on the stand with new gas new plugs cleanedout carberator new petcock kit and still it stalls why?


dirty fuel filter or fuel pump not working,check that fuses are good.check for fuel pressure after the pump. Gravity feed may be enough to start but not enough to run proper. collapsed fuel line could be there as well.

Apr 02, 2010 | 1984 Honda VT 500 C Shadow

1 Answer

I have a Poulan 2000 chainsaw that I tried to adjust the carberator after using it one afternoon. Then it wouldn't start at all. How do I set the fuel and air "set screws" properly.


Start with "H" and "L" needle valves 1.5 turns CCW from lightly seated. Then tune for performance like this.
Carburetor Adjustment by Madsens.com
http://www.madsens1.com/saw%20carb%20tune.htm
CW is leaner; to lean will destroy the saw. If over tightened closed (CW) the adjustment screw faces are easily marred; marred adjustments are difficult to impossible to set properly.
Clean the air filter; adjusting with a dirty filter can cause a run lean condition once cleaned and the saw run.

There are 2 wav (sound - idle & full – may not be highlighted) files that I find most helpful, I think you will too. Good Luck. HTH
Lou

Feb 24, 2010 | Poulan Pro 42CC 2 Cycle Chainsaw, 18"

1 Answer

99 CBR will start but wont run


did you check the fuel filter and fuel supply?

Jun 14, 2009 | 2001 Yamaha V Star 1100 Classic

1 Answer

Engine Dies in Idel


being a certified mechanic has its advantages. there are multiple causes for that problem: lack of air or lack of fuel.
make sure the air filter is mostly clean.
check throttle plate (where air filter tube goes into motor), most likely black with soot and carbon. clean with tooth brush and gas, wipe off with clean rag. repeat ultil CLEAN.
low air flow past plate when closed (idle) will cause stall condition.
dirty throttle body is a common problem with lots of cars. causes engine stall.

dirty fuel filter will also cause this problem.. low fuel pressure at idle.

I also believe that your car is equipped with an idle air control valve. (regulates a bypassed air flow to motor at idle) this valve may be stopped up or non-functional. have local shop take a look, but there are ways to check valve if you consider yourself mechanically inclined

May 21, 2009 | 1994 Ford Escort

2 Answers

Peugeot 206


Haven't had this problem in my 206, the only reason I can think of the motor stopping after you brake is because you haven't changed gear aswell? For example, stopping from 30 at traffic lights and not depressing the clutch will eventually stall the engine.

Jul 28, 2008 | 2005 Peugeot 405

Not finding what you are looking for?
2007 Peugeot Ludix One Logo

1,145 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Joseph Hoffmann

Level 3 Expert

1702 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

adam bikedoc

Level 3 Expert

661 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...