Question about kawasaki Ninja 250R Motorcycles

1 Answer

I have a 2009 Ninja 250r. The bike will not start with the electric starter. It will start if you push start it. I replaced the starter and it's still not working. Normally when you turn the key and flip the engine cut off it makes a noise (dont know if its the computer or what). It's not making this noise now.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 747 Answers

My first impression was that the battery hasn't got enough power to run the starter ans supply the computer with the 9 volts necessary to create ignition. When you push start it the battery is supplying enough voltage for the engine to start.

In short you need to service and charge the battery or a new battery.

Posted on May 18, 2011

  • benfry9 May 18, 2011

    Had the battery tested and its perfect. I used a volt meter and found out that the starter solenoid is not getting any power.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Motorcycle will push start but not ignition switch start


Does it turn over when trying to start? If no then it could be the starter, switch, or battery. Sounds like the starter, especially if you tried another switch.

Apr 14, 2014 | 2008 kawasaki Ninja 250R

1 Answer

Swapped a 99 kawasaki ninja EX250 motor for a 1998 kawasaki ninja EX250 motor now wont start


sounds like you have a carb problem Jason,possibly probably your float level is set too low not allowing sufficient fuel to Venturi

Nov 27, 2011 | kawasaki Ex250f8 Ninja 250r Motorcycle...

1 Answer

How do i time the engine of a 2009 ninja 250r


yeah sounds familiar, my 2009 ninja 250r had the same issue. you'll need to adjust the power band after changing the flux capacitor

May 03, 2011 | 2008 kawasaki Ninja 250R

1 Answer

WHere can i buy a body panel for a ninja 250. its a 2009 model and black


you can look at world of powersports, or ebay you might find one there. I think cheapcycleparts.com also carries sport bike parts.

Nov 13, 2010 | 2008 kawasaki Ninja 250R

1 Answer

I have a 08 ninja 250R and it wont start some times. and some times i have to pull in the cluch and then it will start in nutrule. and some times i have to take it off of the kick stand and pull in the...


If It was my bike I would first replace the side stand switch and the clutch lever switch. I would do one at a time they work together to complete the starter system they tell the bike thats it's ok to start. ck the wires going to the switches and connectors for a rubbed spot or burnt spot on the wire.

Aug 16, 2010 | 2008 kawasaki Ninja 250R

2 Answers

Radiator fan not turning on


has your bike been overheating?

Apr 05, 2010 | 2008 kawasaki Ninja 250R

3 Answers

2006 Kawasaki Ninja 250 will not start


Hi and welcome to FixYa,

Your post "engine will not turn start", are you referring to the starter motor not turning or is it cranking but will not run?
  • if no crank, check the starter relay;
  • will not run, verify that there is spark at the end of the plugs;
  • will not tun, verify that there is fuel in the bowl of the carb (drain again);
  • if it has a fuel valve, set to PRI.
Incidentally, any clicking sound when you press START? Pls postback updates.

Good luck and thank you for using FixYa.


Feb 01, 2009 | 2008 kawasaki Ninja 250R

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

325 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...