Question about 2004 kawasaki ZX-6RR

Open Question

How do i remove the riders seat on a 2000 zx6r

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How do I remove my mustang seat from my 2000 kawasaki vulcan 1500 classic?

On my Roadstar and my Triumph Thunderbird there is a bolt at the back of the pillion seat you remove, slid the pillion back and out then remove (2) allen head bolts from each side of the riders seat just under the edge of the seat. Slide the seat back and off. If you go to they have a parts breakdown of most bikes and it will show the locations of the bolts and brackets. Good luck!

Dec 05, 2014 | 2000 kawasaki VN 1500 Vulcan Classic

1 Answer

How to remove the seat from a 2009 ZX6R

first open passenger seat, with ignition key, remove it.
Unscrew bolt which hold driver seat bracket

Dec 03, 2013 | kawasaki Motorcycles

1 Answer

Remove battery

There are 3 screws. One is at the rear of the seat and screws into the rear fender. The other 2 are on each side to the rear of the rider's seat. After these two are loose, sometimes you have to pull on the side of the seat to get them out of the holes. Pull the seat up and back and you should be in business.

Jan 28, 2013 | 2000 Harley Davidson FLSTS Heritage...

1 Answer

How top remove seats

  • Lift the rear of the passenger seat's cushion to find the screw that secures the seat to the rear fender. Use a 5-mm Allen wrench to remove the screw.

  • Lift the rear of the passenger seat slightly and pull it away from the rider's seat.

  • Use the 5-mm Allen wrench to remove the screws from the rear of the rider's seat.

  • Lift the rear of the rider's seat upward slightly. Pull the seat back until the tabs on the front of the seat separate from the motorcycle's frame.

  • Mar 27, 2011 | 2005 Suzuki Boulevard C50

    1 Answer

    How do I raise the seat up on a 2001 kawasaki zx9 ?

    If it's like my 2003 ZX9, to take the riders seat off you open the rear compartment by removing the passenger seat, the front bracket that hold the the seat has two 8mm bolts and a screw. Unscrew the screw and remove the bolts and slide or remove the bracket and then the riders seat lifts up.

    Jul 23, 2010 | 2001 kawasaki ZX-9 R Ninja

    1 Answer

    Need to remove the seat on my kawasaki voyager 1200 (2000)
    this link will show you where the bolts are at so you can remove the seat. you will start at the back of the rear seat. after you remove the bolts from the rail ( # 130) you can side the seat up and back it will "pop" off. then your bolts from the rear of the rider seat left and back. now both seat are off.
    Good luck
    C.C. Motorsports

    Mar 24, 2010 | 2000 kawasaki VN 1500 Vulcan Classic...

    1 Answer

    Just bout a used '02 vmax. I put stock seat back on. Now the release for the gas tank is not working. Any takers on how to get it off to look at what is going on?

    From Orig Owners Manual on how-to :
    Read carefully and hope it helps.

    Fuel tank cap
    To remove the fuel tank cap
    1. Push the levers on the left and
    right side of the rider seat backrest
    as shown and slide the rider seat
    backrest forward.
    2. Insert the key into the lock, and
    then turn it 1/4 turn clockwise. The
    lock will be released and the fuel
    tank cap can be opened
    To install the fuel tank cap
    1. Insert the fuel tank cap into the
    tank opening with the key inserted
    in the lock.
    2. Turn the key counterclockwise,
    and then remove it.
    3. Slide the rider seat backrest rearward
    and push it down.
    NOTE: @
    The fuel tank cap cannot be installed
    unless the key is in the lock. In addition,
    the key cannot be removed if the cap is
    not properly installed and locked

    To install the rider seat
    1. Insert the projection on the front of
    the rider seat into the seat holder
    as shown.
    2. Place the rider seat in the original
    position, and then tighten the bolts
    and screws.
    NOTE: @
    Make sure that the seat is properly secured
    before riding.
    3. Return the rider seat backrest to
    the original position

    Mar 22, 2010 | 2002 Yamaha V-Max

    1 Answer

    How do you remove passenger and driver seat from 2000 HD fatboy

    with a stock seat there is 3 connection points, 1 under each side flap of the riders seat, the last one is behind the seat. If the grab strap is what is giving you a problem, on the left side of the bike where the strap is attached can be slipped down with an egg shaped slip on the strap. Special note: The 2 bolts under the flaps is a real "P.I.T.A." to get back on, if it hasn't been off a few times, and the bolts will strip, so use caution.

    Feb 15, 2010 | 2000 Harley Davidson FLSTF Fat boy

    1 Answer

    Need to remove seat to jump do I do that?

    There is a bolt at the back of the passenger seat, you remove it and slide the seat to the rear This will expose the bolts at the rear of the rider's seat, remove them and slide the rider's seat back. There's your battery.

    Oct 25, 2009 | 2007 Suzuki Boulevard

    2 Answers

    Remove the seat

    The two rear corners of the riders seat can be pulled back, you will find two allen head screws, simply remove them and the seat can be removed exposing the battery.

    Nov 10, 2008 | 2008 Yamaha YZF-R6

    Not finding what you are looking for?
    2004 kawasaki ZX-6RR Logo

    Related Topics:

    81 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top kawasaki Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers


    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Are you a kawasaki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides