Question about 2004 Harley Davidson FXD - FXDI Dyna Super Glide

1 Answer

After laying my bike down the speedometer stopped working the key symbol on the speedometer stays lit up and the turn signals stay lit constantly and when I turn the turn signals on they don't blink. Where should I start trouble shooting & what reference material do you recomend?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 129 Answers

Do you have the security system on your Dyna? What side of the bike hit the ground? I would start by looking at any obvious areas that received damage.

Does the engine start and run, or does it try to start, but won't keep running?

If you have the security system, it may need to be put on the computer at the H-D shop and be reprogramed. If the bike hit the ground hard, the module may need replaced.

If you received damage to the controls on the handle bars, I would check for wiring damage in that area.

Everything you mention as not working is electrical, and, if you have the security system, it all runs through there.

I find that the owners manual helps some, but sometimes it takes a phone call to a shop.

Posted on Apr 10, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 2001 buick lesabre limited. The left turn signal light stays on constantly on my dash and flashes fast when signaling. I replaced all 4 turn signal lamps in front and still stays lit and fast.


Did you check and see if they were working? If side lights are part of the turn signal, blown bulbs there will cause this also. If one doesn't work, look at the plug. bend and clean the tabs inside it to contact the bulb. If a broken wire, they usually break at the plug. Check for power and ground at the plug.

Nov 26, 2016 | Buick Cars & Trucks

1 Answer

V star 1100 turn signals not flashing


not jarred just crossed check wiring diagram again

Jul 11, 2013 | Motorcycles

1 Answer

I have a 2000 Chevy S-10 and my signal lights stay solid on the dashboard all the time but they blink when turning left and right. How can I stop those lights from staying constantly lit up on the dash....


its the emergency flasher switch on the stering coulom. they all get this problem, dirt gets in the switch and it stops working. try pushing the switch on and off a few times. i AM sure this is the problem

Mar 06, 2013 | 2000 Chevrolet S-10

1 Answer

I have a 2000 sportster my front light does not work and my brake light does not stay lit but when brakes r applied brake light comes on and turn signals all work can someone help me?


Short to main accesories which is dash lights headlamp and tail Lamp not the break lamp it's prolly on the ground wire side since some lights still work ther getting juice but the ground that compleats the circuit to the break lights gets there through the break switch ok but the ground from the key on switch isn't getting to the constant on light start at the try to run new grounds to anyplace and if the lights com on its in the harness and u start tracing it down when the bike is striped of tank and sheetmetel it will be Easter to find look at the harness connectors for green oxidation and loos fitting wires

Mar 14, 2012 | 2004 Harley Davidson XL 883 Sportster

1 Answer

1997 Porsche 911 993 right turn signals burn


hello there
have you solved your lights problem?

proporsche

May 29, 2010 | 1997 Porsche 911

1 Answer

The tail lights have started staying in brake mode, turn signals not working properly. Some times when you hit a bad spot in the road the tach and speedometer stop working as well as the head lights. I...


Could be bad brake light switch but turn signals involved so? Has to be bad ground.Light sockets corroded bad wiring thru fender mounting bolts in tail light assembly broke but corroded in place,not a good ground.Has to be simple cause bike runs.

Mar 09, 2010 | 2001 Harley Davidson FLHR - FLHRCI Road...

1 Answer

Driver side signals only work when headlights are OFF


What may have happened is either the headlights wiring or the parking lights wiring somewhere along the wiring fused to the left turn signals wiring. Depending on if the turn signals go on when you put the parking lights on or the headlights on.

If the signals come on when you turn on the headlights than you only need to locate the light green wire that comes off the left turn signal harness.

Next follow that wire the entire way back to the firewall looking for another wire fused to that wire as you go.

If there are no signs of this you need to continue looking on the other side of the firewall all the way back to the turn signal and hazard flasher unit which is a black box that connects to a black harness located next to a grey harness behind the knee bolster.

But if the signals come on when you turn on the parking lights than you will also need to check the wiring from the rear left signal and follow that light green wire all the way back to the turn signal and hazard flasher unit.

This should fix your problem, but if not than your problem may lay within the the wiring between the turn signal/hazard switches and the turn signal and hazard flasher unit.

Also you may have a burnt circuit in the junction block. This block is where the light green from the rear left signal and front left signal meet. Don't have a description but if you cannot find it let me know and I will go out to the yard and look myself and let you know.

Apr 22, 2009 | 2004 Dodge Intrepid

Not finding what you are looking for?
2004 Harley Davidson FXD - FXDI Dyna Super Glide Logo

272 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...