New motorcycle engine oil (as per manufacturer's recommendation)
Oil filter
Wrench or socket set
Oil drain pan
Funnel
Shop rags or towels
Prepare the Motorcycle:
Ensure the motorcycle is on a level surface and turned off.
Allow the engine to cool down if it has been running.
Locate Drain Plug and Oil Filter:
Identify the oil drain plug underneath the motorcycle engine. It might be covered by a skid plate or other protective cover.
Find the oil filter. It's usually located on the side of the engine.
Drain the Old Oil:
Place the oil drain pan underneath the drain plug.
Use a wrench to carefully loosen the drain plug (anticlockwise). Let the old oil drain completely into the pan.
Once drained, re-tighten the drain plug securely.
Replace the Oil Filter:
Use an appropriate tool to remove the old oil filter. Be ready for some additional oil to drain out.
Apply a thin layer of new oil to the rubber gasket on the new oil filter.
Install the new oil filter and tighten it according to the manufacturer's instructions.
Refill with New Oil:
Locate the oil filler cap, usually on the side of the motorcycle's engine.
Use a funnel to pour the recommended amount of new motorcycle engine oil into the oil tank.
Check Oil Level:
×