Question about 2000 Harley Davidson FLHR-FLHRI Road king

2 Answers

On my pipes one side is hot and the other is cold

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi m8.my bike sounds funny.and one pipe is hot and the other is cold.i check the leans to the pugs and they clean...?

Posted on Apr 05, 2013

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Check the pipe right where they come out of the heads. It depends on what type of exhaust system you have on your Road King. If the stock exhaust is on the bike, the rear cylinder exhaust is directed to both mufflers. With the exhaust from the front and part of the exhaust from the rear cylinders going to the right side muffler, it gets more exhaust than the left side and runs hotter. Like I said, check the temp of the exhaust pipes at the cylinder heads. If one of them is cold, that cylinder is not firing. As long as both of the pipes are hot there, you're fine. Just ride the bike and have fun.

Ride Safe.
Stevev

Posted on Apr 10, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hotpoint ice diamond RFA52 P freezer ok fridge not cold enough, this is not a frost free and there are no vents in fridge or feezer?


Good day, please check at the back, at the bottom where the compressor is located for the pencil dryer(as in photo). Get a nice firm grip on it just be careful and feel the temp if it's cold or one side is hot and the other side cold the dryer is block. Otherwise feel the thickest pipe running into the compressor it should be cold if the fridge has been running for a while and the thin copper pipe existing the compressor should be hot. If the thin pipe is freezing up with a thick layer of ice and the dryer as some med-temp then there's a gas leak. If the thin copper pipe is very hot and the dryer has no temp then there's a blockage but if the thin copper pipe feels med-temp and the thick copper pipe more or less the same but a bit cooler the compressor is not pumping also feel if the compressor is running. If dryer as a warmth temp and the thin copper pipe is hot and the thick one very cold(when tipping your finger on your tongue and pressing it against the pipe your finger should stick a bit) if all checks out then it's the thermostat switching the compressor off at the rong temp.

Regards
6_9_2016_8_03_05_pm.jpeg

Jun 09, 2016 | Hotpoint Refrigerators

1 Answer

Cold water connection is hot


Did you put hot to hot side? And cold to cold side?
Cold water pipe usually has shut-off valve.
http://waterheatertimer.org/How-to-troubleshoot-electric-problems-with-water-heater.html#new

Add comment and say brand and type of water heater for possible follow-up

Mar 23, 2013 | RELIANCE ELECTRIC WATER HEATER

1 Answer

Hot water barely comes out,


If you switched the feed hoses over and the problem reversed itself, cold has gone from fast to slow useing the hot water pipe and hot from slow to fast useing the cold water pipe then this would indicate a fault in the water supply from the hot pipe. What sort of pressure is coming from the hot pipe when not connected to the machine but filling in to a bucket? Are there any shut off valves before the pipe that supplies the hot water? Are they fully turned on? Any kinks in the feed pipe for the hot water? Has the hot water feed pipe collapsed internally? Change the pipe to check this and not just at the machine side.

Dec 31, 2012 | GE Spacemaker Washer and Dryer Electric...

1 Answer

We are installing an American Standard Water heater and are wondering do we need to remove the pink plastic plug/gramet in the hot water side and the blue plastic plug/grammet from the cold water intake...


Yes, if these plastic parts cover pipe thread or would stop the flow of water.
If the plastic parts simply sit around the pipe like a collar, then they do not have to be removed.
Red marks for Hot pipe
Blue for cold water inlet.
If your hot and cold are reversed, then water heater will not function.
In ordinary installation, cold water line has the shut off valve.

Add a comment for more free help.
Also take advantage of fixya phone service.
For a price, fixya expert speaks with you over phone while you work on heater.

Jan 09, 2011 | American Standard Water Heaters

1 Answer

Which side is the hot and cold pipes plumbed into the valve?


They can be piped either way on older valves but they should be piped with cold on the right and hot on the left.
On the newer tub and shower valves that are scald guard or posi temp valves they must be piped properly or they will not work right. Hope this helps you. Thanks and happy holidaysFrodo 959

Dec 24, 2010 | Home

1 Answer

How does rhe hot and cold water hook up on a 71-40d which is which top and bottom


Tanks are marked with Hot and Cold.
1) If water connections are on top of tank, look for red marking or word HOT that shows where hot water pipe connects. Look for blue marking or word COLD that shows cold water connection.
2) If water connections are on side of tank, cold water connects to bottom one, and hot connects to top.

3) If hot and cold are reversed, the tank will not work.
Pipes on top of tank: cold water enters tank and is sent to bottom of tank in a long tube called the dip tube. This means the cold is on the bottom since hot water rises to the top. The hot water exits top of tank.
Pipes on side of tank: You want cold water to enter bottom, so hot water naturally rises to the top outlet.

Nov 14, 2010 | Rheem 40 GAL ELEC TALL Water Heater 6YR SC...

1 Answer

I have replaced my electric water heater and I have checked everything I can think of and I still run out of hot water in 3 minutes. What on earth is the problem.


3 minutes?? does the water run cold then? or just warm?
Is this what the tank you replaced was doing? If so, then you may have: 1 a recirculating pump instant hot water system thats faulty and allowing cold water backflow into hot water piping. 2 A tempering valve that has stuck, allowing cold water into your hot water system.
Or maybe a broken or missing dip tube in your new heater.
If after 3 minutes the water is coming cold out leave that faucet running and go to heater and feel the hot water outlet pipe from the heater. if that pipe is hot then the heater is not the problem. If the hot pipe from the heater is cold the heater is the problem. (Make sure the cold pipe coming into the heater is connected to the Right side marked "cold" !) If there is a tempering valve by the heater: feel the output from the tempering valve, if it is cold and the pipe from the heater to the tempering valve is hot, then the tempering valve is the problem. If all these are OK somewhere in your plumbing system hot and cold may be connected possibly a faucet or showerhead that is shut off at the spout/head, but hot/cold handles are left turned on then cold water can backflow thru hot pipe.

Jan 18, 2010 | Rheem 40 GAL ELEC TALL Water Heater 6YR SC...

1 Answer

Why is my warm water is cold? The hot is hot and cold is cold but warm is cold.


There is too much pressure on the cold feed, reduce the pressure on the cold by partly closing off the tap on the cold.
Or ensure the hot feed is fully open and not blocked, check if there are filters inline - remove the feed pipes at the washer end and look into the inlet valves - clear if blocked.
The inlet valve is common to hot and cold water with only a small pipe to fill the machine, the cold water is being forced back up the hot water pipe due to the pressure you can feel the pipe cool down after running hot then go to warm, if hot water is flowing the pipe will stay hot, if not then cold is going up the hot pipe.

Jun 28, 2009 | Admiral AW22 Top Load Washer

1 Answer

Scalding hot water from cold tap for short while, then cold.


sounds like you have a hot water leak un der your foundation.

Jun 16, 2009 | Water Heaters

1 Answer

My hot water pipes were froze this morning. Michigan! I have cold(almost froze) There is not any water coming out in kitchen from hot side. I have cold though in every room. There is water coming out a...


no easy fix . your water heater should be fine most likely its up to temp ,thats why its not lighting its main flame . the frozen pipe is another story you need to get the heat up in the house open any cuppord doors that have pipes in them like under a sink ( to let heat from the room get it there ) leave a faucet on hot and wait . at some point you will unfreeze . but you migh end up with a broken pipe so keep your eye out for a water leak . good luck

Jan 16, 2009 | Heating & Cooling

Not finding what you are looking for?
2000 Harley Davidson FLHR-FLHRI Road king Logo

1,683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...