Question about 1992 Suzuki GSX-R 750 WN

1 Answer

Do you know wherei can get a ignition plate for 92 gsxr

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 339 Answers

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2000 Suzuki 600 gsxr clutch issues

Replace all the clutch plates and the springs, or get a racing clutch. And stop slipping the clutch to do wheelies :>)



  • 2000 Suzuki GSX-R600 Clutch - Motorcycle Superstore Clutch 2000 Suzuki GSX-R600 ... 2000 Suzuki GSX-R600 Clutch. ... it was easy to install and it was the first clutch system i ever put on my 2007 GSXR 1000 ...
  • 2000 Suzuki Katana 600 Clutch Springs - Motorcycle Superstore Clutch 2000 Suzuki Katana 600 ... KG Clutch Factory High Performance Spring SetFor ... and it was the first clutch system i ever put on my 2007 GSXR 1000 ...
  • GSXR 750 Suzuki Sport Motorcycle Clutch Parts ... Clutch Springs Suzuki - GSXR 600 2004-2005/GSXR 750 2000-2005/High Performance/Heavy Duty. Price: $35.95 (USD) GB Racing - Clutch Cover Suzuki ...
  • GSXR 600 Suzuki Sport Motorcycle Clutch Parts ... Clutch Springs Suzuki - GSXR 600 ... Orient Express - Clutch Springs Suzuki - GSXR 600 2004-2005/GSXR 750 2000 ... GB Racing - Clutch Cover Suzuki - GSXR 600 ...
  • 2000 Suzuki GSX-R600 Street Bike Clutch Springs ... Clutch 2000 Suzuki GSX-R600 Street Bike Parts ... Race Suits; Riding Suits; Riding Underwear; Socks; ... Clutch; Cooling System; Drive; Electrical; Engine;
  • Suzuki GSXR600 Clutch Plates and Parts - Schnitz Racing Shop Schnitz Racing for Suzuki GSXR600 clutch plates, ... Valves & Springs; Exhaust. ... Suzuki GSXR600 Clutch Components and Parts from Schnitz Racing.
  • Suzuki GSXR 600 1997-2000 EBC SRK Complete Clutch Kit Suzuki GSXR 600 1997-2000 EBC SRK Complete ... heavy duty clutch springs of either ... Suzuki GSXR 600 2006-2007 EBC SRK Complete Clutch Kit Suzuki GSXR 600 ...
  • Sigma Clutches for Suzuki - Sigma Clutches for Suzuki. Sigma Suzuki GSXR600 & GSXR750 K6-K8 2006-2008 Performance Slipper Clutch . Ref: ... - Requires GSX-R1000 clutch springs (not ...

    Suzuki GSXR600 Clutch Plates and Parts Schnitz Racing
  • Jun 12, 2016 | 2000 Suzuki GSX-R 600

    2 Answers

    Ok well I finally. Changed my clutch plates on my 2000 Suzuki 600 gsxr it starts up fine when its cold

    Hi, Anonymous I would love to help you but the batteries in my crystal ball are dead and my mental telepathy headset is broken so sorry, I need to know what's the problem with your motorcycle please ask your question again and provide this information in the details box or comment section or edit your original question. Good luck and have a nice day.

    Btw, I’m available to help over the phone in case u need at

    May 23, 2016 | Suzuki Motorcycles

    1 Answer

    Discs for gsxr 750 wn what other bikes

    OEM Nos. 59210-40C03 Front Right Disc
    59220-40C03 Front Left Disc
    69211-17C00 Rear Disc
    These fit 1988-92 GSXR 750 and !989-82 GSXr1100

    Aug 17, 2014 | Motorcycles

    2 Answers

    My 2001 suzuki gsxr 750 won't downshift all of a

    Your shifter cam bolt has backed out, this is a common problem on earlier GSXR's. Happened twice on my 2000, both times during race weekends.

    Stop riding the bike and shifting at all and do the following repair:

    Remove clutch cover - you'll drain some oil so make sure you have a drip pan underneath

    Remove the 5 the clutch housing plate bolts - careful as they have pretty stiff springs behind them providing torsion

    Remove all the clutch plates - make sure you keep the same order and re-install the same way; matter of fact if you have never replaced your clutch plates, do it along with this repair.

    Once the clutch case is basically empty, you will see at the lower left a small assembly that looks a bit like a tuning fork, at the end of the shifter shaft. There is also a cam there with rounded cogs. There is a 8mm or 10 mm hex head bolt that holds this cam, and I'm sure it has backed out and is causing the cam and shifter to not engage the gears properly.

    Remove the cam bolt. Spray some compressed air or even a light spray of brake cleaner in the threaded area where the bolt you just removed is. Make sure the threads are clean and dry.

    Place the cam bolt and assembly back in its position, and take some RED loctite to the shifter cam bolt threads. Make sure to torque the bolt to specifications, I think it's 24 or 28 nm.

    Let the bolt set for 24-8 hours, then reassemble the clutch and replace the clutch cover gasket. Top off the oil and go riding.

    Jun 18, 2011 | 2001 Suzuki GSX-R 750

    1 Answer

    I need to know is my 92 suzuki gsxr750 water cooled or is it an oil cooled (if thats even poosible) an where do u add coolant at ?

    GSXR 750 '92 spec is oil cooled ( If you look at the front of the motor you will see a narrow slightly curved radiator that's the oil cooler) The water cooled bikes have a radiator cap at front right side of the fairing. If you cant find a radiator cap it's definately oil cooled. Safe Riding!

    May 06, 2011 | Suzuki GSX 750 ES Motorcycles

    1 Answer

    I started my 92 gsxr 750 today and let it idle for a while then I turned it off with the kill switch .but forgot to turn the ignition key off.went in side for about 30 min .then came back out to start it...

    By leaving key on you killed battery.Charge up battery and if dosent take charge, need new battery.Motorcycle batteries dont take much to kill,exspecialy if it is more than 3 or 4 yearts old.

    Mar 06, 2011 | 2000 Suzuki GSX-R 750

    1 Answer

    Cluthch problems

    The clutch uses 8 fiber friction plates and 7 metal pressure plates. The first and last plate in the clutch should be a friction plate.

    Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part, the part is not in stock.

    Can I get a “very helpful” rating on this answer? And it doesn’t cost anything extra!

    Jul 07, 2009 | 1992 Suzuki GSX-R 750 WN

    1 Answer

    92 Olds 88 Starts only in warm weather or supercharging battery

    The O rings on the fuel injection system can be tricky to install. the problem is usually during reinstallation the O rings get pinched. It is possible to replace them yourself. but I would take it to a shop if I had to replace them. the MAF sensor being crushed is not good either.

    Feb 16, 2009 | 1992 Oldsmobile 88

    1 Answer

    Replace ignition tumbler

    STEP BY STEP Please Remember to Rate Me Thank You RejakWilson

    WARNING: On vehicles equipped with Airbags, disable airbag system prior to performing service procedures.

    1. Disconnect battery ground cable.
    2. Remove steering wheel as outlined under STEERING WHEEL procedure.
    3. Using a screwdriver, pry cover from housing.
    4. Using lock plate compressing No. J-23653 or equivalent, compress lock plate, and pry snap ring from groove on shaft, Fig. 5. Slowly release lock plate compressing tool, then remove tool and lock plate from shaft end.
    5. Slide canceling cam and upper bearing preload spring from end of shaft.
    6. Remove turn signal (multi-function) lever.
    7. Remove hazard warning knob retaining screw, button, spring and knob.
    8. Remove pivot arm.
    9. Wrap upper part of electrical connector with tape to prevent snagging of wires during switch removal.
    10. Remove switch retaining screws and pull switch up from column, guiding wire harness through column.
    11. Reverse procedure to install.

    1. Remove turn signal switch as outlined under TURN SIGNAL SWITCH.
    2. Remove buzzer switch and spring clip. On 1990-92 models, ignition key must be removed from lock to remove buzzer switch. On 1991-92 models, switch and spring clip are one assembly.
    3. Turn lock cylinder to Run position on 1989 models or Lock position on 1990-92 models, then remove lock cylinder retaining screw and the lock cylinder.
    4. To install, rotate lock cylinder to the stop while holding housing. Align cylinder key with keyway in housing, then push lock cylinder into housing until fully seated. Lock cylinder must be in Run position to install buzzer switch.
    5. Install lock cylinder retaining screw, then the buzzer switch, turn signal switch and steering wheel.

    Aug 30, 2008 | 1989 Chevrolet Celebrity

    Not finding what you are looking for?
    1992 Suzuki GSX-R 750 WN Logo

    Related Topics:

    246 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Suzuki Experts


    Level 3 Expert

    80637 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4995 Answers


    Level 2 Expert

    83 Answers

    Are you a Suzuki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides