Question about Skyteam ST 100-2 Motorcycles

Open Question

Hi, got a 2009 50cc chinese scooter Sonic yqte 50cc, had to change seals in front suspension legs can you tell me how much oil is needed in each unit. Thanks Keith

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 16 Answers

SOURCE: how do i dismantle front forks to replace the oil seals

You just needed to.... remove front wheel, support bike on something, undo retaining bolts on forks, tap out fork legs from the top, using a soft mallet. Take out fork seals with a seal pick, (halfords) Replace old seal with new seals, in reverse order) sliding over the fork leg, tapping into place. Then put replace forks etc in reverse order (from dissassembly). Hope this helps

Posted on Feb 21, 2009

Ad
  • 3567 Answers

SOURCE: fork and engine oil for kawasaki kle 400 from 1993

Get the fork oil from the Kawasaki dealer and he will give you the right oil and tell you how much is needed. The gearbox oil is 10w40, any major brand is fine. I think your bike has a oil dipstick? If not then the oil capacity should be on the casing by the oil fill. Worst case, ask the dealer while you are there!
Best wishes and I hope this helps.

Please rate this solution. Thanks Robert!

Posted on Apr 06, 2009

  • 53 Answers

SOURCE: front fork leaking oil from bottom of the seal.

change the oil seals and oil in the fork,and avoid wheelies on the bike and off road biking 

Posted on May 17, 2009

  • 13 Answers

SOURCE: Losing speed after 30 kmph on chinese scooter 50cc

clean out the carborater

Posted on Aug 14, 2009

  • 26 Answers

SOURCE: ok i have a kingring 4t 50cc scooter and its only

does it still wind out normal? if it has a centrifugal clutch, it could be slipping. check springs in clutch.

Posted on Mar 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How many litres of oil does the sump on jonway YY125T take?


Hi, Paulo for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Jonway, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
How to change your oil on Chinese Moped
http://www.motorscooterguide.net/Manuals/Genuine_Buddy125_Service_Manual.pdf
Service Support China Jonway Group
Scooter Parts Absolutely Scooters Supply Parts for Chinese Scooters

Sep 19, 2016 | Jonway Motorcycles

1 Answer

Scooty kristal oil drain


Hi, David for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Oil Change Guide 50 150cc Chinese GY6
Chinese Scooter Oil Change Scooter Focus All about Scooters
150cc GY6 oil change
Free Bajaj Motorcycle Service Manuals for download

May 26, 2016 | Motorcycles

1 Answer

Change The front suspension oil ring


u mean ooil seal, there are some great litle tols out, you slide a thin plastic plate into the seal between the seal and the stanchion, and slide it round the leg, it cleans all the muck out and save s the seal these do not often split it is a bit of muck that allo0ws seapage, if it needs a seal, a pain in the bottom, I do all my opwn but a pain

Oct 03, 2014 | Motorcycles

1 Answer

How do i oil my front shock on the yamaha 180 scooter?


You don't oil your shock. The oil can be renewed. You have to remove both fork legs from you scooter.
Remove the top cap of each, turn them upside down and pump them dry.
you can find how much oil and which oil grades goes into them. It will be either an air gap measurement or an oil capacity.
if you fork leaked, replace the stanchion seals as we'll.
i wouldn't bother doing it if it doesn't give you trouble. Scooter forks can achieve high mileage without any oil change.
the only time I replace fork oil on any daily ride bike, is when they leaked and the seals are shot.
Franck

Sep 10, 2014 | Motorcycles

1 Answer

Oil change on a cpi gtr 50


Hi, Anonymous sorry you can't find the first and best tool you ever bought for your CPI despair not for a mere $0 you can download another one. For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
Chinese Scooter Oil Change Scooter Focus All about Scooters
How to change your oil on Chinese Moped http://cpiscooter.com/detaillants/SEVICE%20MANUAL%20GTR%20INTERNET.pdf
CPI Scooter Parts Racing Planet USA
CPI GTR 50 2011

Feb 14, 2014 | 2011 Cpi GTR 50

1 Answer

Diamo 2006 Cruiser VTwin 250 oil change


Hi, Willie try using a breaker bar or a 2 ft. long piece of pipe that fits over your ratchet handle for more leverage and give it a quick snap for more information about your question and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day.
Hyosung GV250 Service Oil Change
http://www.carlsalter.com/diamo-service-manuals.asp
Scooter Parts for Chinese Scooters Atvs
Chinese ATV Owners Repair Manuals
Diamo Cruiser Twin 250 2006

Jun 08, 2012 | 2006 Diamo Cruiser VTwin 250

1 Answer

How much oil do i put in each fork leg and where does it go. does it go inside the internal suspension and or just inside the fork leg. cheers johnny


Hi Johnny, when you pull the inner leg out where the seal goes on, thats where you put the oil in but you need to make sure all old oil is out and you bleed the new oil as you put it in by simply pushing leg in and out, check with your dealer or service manual as to the amount and grade of oil, they come in different grades!!

Feb 14, 2011 | Moto Guzzi Le Mans Motorcycles

1 Answer

Adjusting suspension


hi there,,if u can see a air valve on top of the forks, then u can use a bicycle or foot pump to squeeze a bit more air to the fork,, or if there is an adjuster on the fork,ie, a plastic lookin cap with 1 2 3 4 and a arrow on it u can turn that to a comfortable position,, if there is nothing u can see, then u either have not enuff fork oil in each fork leg,,or if there is enuff,, u will need to change the grade of fork oil and replace wots in it,, so id say a more harder grade of oil,, usually there isnt enuff oil in the forks to make it dive into the front wheel,, try topping the oil up,,with about,4or 5 egg cup fulls of oil in each leg,,if nothing has made any difference,, put in another 4 or 5 ,,,any probs on how u put oil in2 the legs ,please do come back in ,and il tell u how 2,, im assuming u do no,, ok ,,cheers

Jan 29, 2009 | 1995 kawasaki KLE 500

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Skyteam Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Gregg Mahin
Gregg Mahin

Level 3 Expert

45555 Answers

yadayada
yadayada

Level 3 Expert

77499 Answers

Are you a Skyteam Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...